How to change scissors spring
-
Bought a TSA Explorer with broken spring, now brought a replacement spring.
Tried to find on the forum a How-to but couldn't find one, so the next step was to start a thread asking a question.
However... I found this very nice video that helped, so I still decided to post it, in the hope it will help somebody else too.
-
@Corwyn said:
Bought a TSA Explorer with broken spring, now brought a replacement spring.Tried to find on the forum a How-to but couldn't find one, so the next step was to start a thread asking a question.
However... I found this very nice video that helped, so I still decided to post it, in the hope it will help somebody else too.
I drive the old spring out with a 1/16" diameter pin punch from Sears/Craftsman. It's easy to press the new one in using a pair of pliers, then wiggle the spring to the right depth. Cheap, easy effective. No need for specialized tools.
Oh, and when driving it out, it's best to have something solid(with a small hole in it for the spring to escape into) under the scissor end.
-
I used a 'masonry nail'

-
It's great to hear how others do it but I have arthritis and using the spring repair kit makes it easy for me...done in about 90 sec. It's very difficult for me without the kit.

-
I use wood kebob skewers, They are tapered so the point goes inside of the spring then as you push the diameter gets larger, pushes it right out.
Sak's rule !
-
I use the mini driver that rides in the corkscrew.
Nate
-
Popping it out is easy. Replacing it with a newer one and having it stay in place is a bit harder.
-
I just squeezed it in with pliers ( a LM Wave if memory serves me
) -
@Taxi Dad said:
I just squeezed it in with pliers ( a LM Wave if memory serves me
)Thats basically how I do it to. Line it up close and pinch it in with my bench vice. I use it since Ive already got the jaws protected for other work, so it wont scratch the scissors at all.
-
@Taxi Dad said:
I just squeezed it in with pliers ( a LM Wave if memory serves me
)Thats basically how I do it to. Line it up close and pinch it in with my bench vice. I use it since Ive already got the jaws protected for other work, so it wont scratch the scissors at all.
we've all seen your beautiful work Syph. I'm not quite the craftsman you are

(and more scratches on 'old faithful' would hardly show)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


