Blue-ing a multitool
-
I think you mean Frankenstein's Monster.
(Maybe you don't, I doubt Frankenstein's dumps were really any more charming)
-
-
You can't blue nonferous metals and stainless steel but there or other finishes that can be applied.
-
bluing is a reaction to the cemical causing oxidization and stainless does not oxidize.
-
Yes it does. That's why we can have black oxide multitools. As far as I know there isn't any problem with bluing stainless parts, it's just a slightly different method but works just as well. I think this is rarely seen because of the disassembly problems and number of very small parts.
-
I've tried, without success so far. Birchwood Casey sells an array of blueing products. One of them is called Super Blue, which is supposed to work on low carbon steels. It doesn't work <u>at all</u> on stainless multitools. No color change at all. I was hoping to "cover up" a few scratches on a black Leatherman and then later a black SOG, but no luck. :(
-
I know you can blue a stainless barrel so there is some other process that works like spoonrobot said. No idea what it is.
-
What about a do it yourself electroplating? Get that high shine look with nickel finsh.
-
I belive black oxide is a coating not acctually oxdiation I could be wrong, oxdiation is a thin rusted layer which turns black rather than the rust we think of and acctually help prevent rust on steel that is not stainless, I did custom guns for 8 yrs and all black stainless was coated and called black oxcide its just a name gun people are familuar with, not trying to argue just telling you what I know.
-
Well, near as I can tell; in certain areas of manufacture the terms bluing and black oxide are used interchangeably. Both being referenced as corrosion of the surface for a specific purpose, useful in several different types of iron and steel, including stainless.
I did find this interesting snippet about black oxide as applied to 400-series fasteners; I'm not sure if this 400-series designation applies to the tool/knife world or not:
A negative to the black oxide finish is the fact that the coating is not a corrosion- resistant finish. It is not suitable in any situation for outdoor use, a fact that negates its selection for stainless steel in the first place. In samples of stainless steel parts tested for suitability with black oxide as a coloring agent it was found that the parts exhibited red rust in unacceptable amounts. **Series 400 stainless steel parts rusted more rapidly when black oxide finished than did parts left plain-passivated.**Series 200 parts rusted faster than did Series 300 parts and showed more undesirable rust product (flake rust vs. red "wash" rust) when oxided than did plain-passivated parts. Series 300 stainless steel, the main material of most threaded fasteners, showed red rust (see photo) on parts with nominal salt spray hours.
I'll see what else I can find.
-
@Spoonrobot said:
Well, near as I can tell; in certain areas of manufacture the terms bluing and black oxide are used interchangeably. Both being referenced as corrosion of the surface for a specific purpose, useful in several different types of iron and steel, including stainless.I did find this interesting snippet about black oxide as applied to 400-series fasteners; I'm not sure if this 400-series designation applies to the tool/knife world or not:
A negative to the black oxide finish is the fact that the coating is not a corrosion- resistant finish. It is not suitable in any situation for outdoor use, a fact that negates its selection for stainless steel in the first place. In samples of stainless steel parts tested for suitability with black oxide as a coloring agent it was found that the parts exhibited red rust in unacceptable amounts. **Series 400 stainless steel parts rusted more rapidly when black oxide finished than did parts left plain-passivated.**Series 200 parts rusted faster than did Series 300 parts and showed more undesirable rust product (flake rust vs. red "wash" rust) when oxided than did plain-passivated parts. Series 300 stainless steel, the main material of most threaded fasteners, showed red rust (see photo) on parts with nominal salt spray hours.
I'll see what else I can find.
Ahh, thanks for that. It parallels my own observations. Some folks think that blueing on a gun or black oxide on steel somehow helps resists rust. I've seen no such thing. As the article states, it seems as if black oxide actually makes steel rust easier.
-
@J-sews said:
Some folks think that blueing on a gun or black oxide on steel somehow helps resists rust. I've seen no such thing. As the article states, it seems as if black oxide actually makes steel rust easier.Shhh. I was one of those folks.
It does make rust harder to see, which is kind of the same thing right?
:D
-
@J-sews said:
Some folks think that blueing on a gun or black oxide on steel somehow helps resists rust. I've seen no such thing. As the article states, it seems as if black oxide actually makes steel rust easier.Shhh. I was one of those folks.
It does make rust harder to see, which is kind of the same thing right?
:D
Hey, you're right! Perhaps that's why back in the 1800's they commonly used a process on guns called browning...? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
::) :o :D :ahhh :ahhh :ahhh