Fishing Multi Tool?
-
@Higgins617 said:
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?It is not a screwdriver. ;)
-
[quote author=Higgins617 link=topic=55869.msg1022908#msg1022908 date=1421005660]
[quote author=NKlamerus link=topic=55869.msg1022904#msg1022904 date=1421005279]
[quote author=Higgins617 link=topic=55869.msg1022903#msg1022903 date=1421005144]
[quote author=NKlamerus link=topic=55869.msg1022897#msg1022897 date=1421004095]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
[/quote]Heck, rounding up 275 for much of anything would be very hard for me, but I spread myself thin with hobbies :D. My bike was the most I've ever spent on myself, fishing is more of my wind-down at the end of the day. Gimme an Ugly Stik and any half decent spinning reel and you won't hear a complaint out of me. Bikes are a different story, unfortunately due to my size and riding style, cheaper parts tend not to live long lives under my command.
[/quote]
That's one thing I've never got into, biking!For me it's the opposite. I'm always battling myself too.
"I spent 275 bucks on a reel, I can't destroy it"
But on the other hand "it costs so much because it's built to handle abuse"
I guess bikes kinda HAVE to be used though
[/quote]Sadly they're about my only gear that get's used to their fullest :ahhh I'm already on my third set of wheels since I got it last November!
I'm just glad I didn't spend a ton on my fly setup, I would be a bit miffed by now. Your fishing season also tends to last a bit longer than mine too lol
[/quote]
All year :DWinter is flounder season, which brings the option of fishing them, gigging them, or Bowfishing them!
Spring hits and the water hits 67° and the Cobia are here. EVERY boat has a ladder or tuna tower on it sight fishing for cobia.
Late spring and the pelagics move in, Spanish mackerel, king mackerel, grouper and amberjack follow the baits and red snapper back into shallower water.
Summer time and the bait balks get here and everything goes nuts. All kinds of fish all the time. And that's why we live here.
Late summer and fall are flounder, trout, and Redfish as the bait moves into grass flats.
And winter sends the pelagics further west where they follow the Yucatan, and cross back over to Cuba and Key west Florida.
It's one giant counter clockwise migration that florida gets the best of!
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
-
[quote author=NKlamerus link=topic=55869.msg1022911#msg1022911 date=1421005923]
[quote author=Higgins617 link=topic=55869.msg1022908#msg1022908 date=1421005660]
[quote author=NKlamerus link=topic=55869.msg1022904#msg1022904 date=1421005279]
[quote author=Higgins617 link=topic=55869.msg1022903#msg1022903 date=1421005144]
[quote author=NKlamerus link=topic=55869.msg1022897#msg1022897 date=1421004095]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
[/quote]Heck, rounding up 275 for much of anything would be very hard for me, but I spread myself thin with hobbies :D. My bike was the most I've ever spent on myself, fishing is more of my wind-down at the end of the day. Gimme an Ugly Stik and any half decent spinning reel and you won't hear a complaint out of me. Bikes are a different story, unfortunately due to my size and riding style, cheaper parts tend not to live long lives under my command.
[/quote]
That's one thing I've never got into, biking!For me it's the opposite. I'm always battling myself too.
"I spent 275 bucks on a reel, I can't destroy it"
But on the other hand "it costs so much because it's built to handle abuse"
I guess bikes kinda HAVE to be used though
[/quote]Sadly they're about my only gear that get's used to their fullest :ahhh I'm already on my third set of wheels since I got it last November!
I'm just glad I didn't spend a ton on my fly setup, I would be a bit miffed by now. Your fishing season also tends to last a bit longer than mine too lol
[/quote]
All year :DWinter is flounder season, which brings the option of fishing them, gigging them, or Bowfishing them!
Spring hits and the water hits 67° and the Cobia are here. EVERY boat has a ladder or tuna tower on it sight fishing for cobia.
Late spring and the pelagics move in, Spanish mackerel, king mackerel, grouper and amberjack follow the baits and red snapper back into shallower water.
Summer time and the bait balks get here and everything goes nuts. All kinds of fish all the time. And that's why we live here.
Late summer and fall are flounder, trout, and Redfish as the bait moves into grass flats.
And winter sends the pelagics further west where they follow the Yucatan, and cross back over to Cuba and Key west Florida.
It's one giant counter clockwise migration that florida gets the best of!
[/quote]Okay, if I lived there my priorities might be shifted as well :o
-
[quote author=Higgins617 link=topic=55869.msg1022913#msg1022913 date=1421006309]
[quote author=NKlamerus link=topic=55869.msg1022911#msg1022911 date=1421005923]
[quote author=Higgins617 link=topic=55869.msg1022908#msg1022908 date=1421005660]
[quote author=NKlamerus link=topic=55869.msg1022904#msg1022904 date=1421005279]
[quote author=Higgins617 link=topic=55869.msg1022903#msg1022903 date=1421005144]
[quote author=NKlamerus link=topic=55869.msg1022897#msg1022897 date=1421004095]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
[/quote]Heck, rounding up 275 for much of anything would be very hard for me, but I spread myself thin with hobbies :D. My bike was the most I've ever spent on myself, fishing is more of my wind-down at the end of the day. Gimme an Ugly Stik and any half decent spinning reel and you won't hear a complaint out of me. Bikes are a different story, unfortunately due to my size and riding style, cheaper parts tend not to live long lives under my command.
[/quote]
That's one thing I've never got into, biking!For me it's the opposite. I'm always battling myself too.
"I spent 275 bucks on a reel, I can't destroy it"
But on the other hand "it costs so much because it's built to handle abuse"
I guess bikes kinda HAVE to be used though
[/quote]Sadly they're about my only gear that get's used to their fullest :ahhh I'm already on my third set of wheels since I got it last November!
I'm just glad I didn't spend a ton on my fly setup, I would be a bit miffed by now. Your fishing season also tends to last a bit longer than mine too lol
[/quote]
All year :DWinter is flounder season, which brings the option of fishing them, gigging them, or Bowfishing them!
Spring hits and the water hits 67° and the Cobia are here. EVERY boat has a ladder or tuna tower on it sight fishing for cobia.
Late spring and the pelagics move in, Spanish mackerel, king mackerel, grouper and amberjack follow the baits and red snapper back into shallower water.
Summer time and the bait balks get here and everything goes nuts. All kinds of fish all the time. And that's why we live here.
Late summer and fall are flounder, trout, and Redfish as the bait moves into grass flats.
And winter sends the pelagics further west where they follow the Yucatan, and cross back over to Cuba and Key west Florida.
It's one giant counter clockwise migration that florida gets the best of!
[/quote]Okay, if I lived there my priorities might be shifted as well :o
[/quote]
Yeah but there is still plenty of Bikers here as well.Eglin Air force Base is the largest military base in the nation land mass wise. (Something like that)
And they have trails for hikers and bikers.
The Florida Scenic Nature Trail also runs East and West about 20 minutes north of me...
I've thought about joining some clubs but I think I'd much rather hike. I miss the days of backpacking with scouts.
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
Fish Continuum Transfunctioner. ;)
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
Fish Continuum Transfunctioner. ;)
This is why we can't have nice things
, why do you have fishing rods, aren't you supposed to catch stuff with those big claws?I never got to be part of the Scouts, it wasn't a big thing around here unfortunately, my version of training was wandering in the woods all summer for ten years of my childhood.....
-
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
Fish Continuum Transfunctioner. ;)
This is why we can't have nice things
, why do you have fishing rods, aren't you supposed to catch stuff with those big claws?I never got to be part of the Scouts, it wasn't a big thing around here unfortunately, my version of training was wandering in the woods all summer for ten years of my childhood.....
[/quote]I believe it's a spike to kill fish?
-
[quote author=zoidberg link=topic=55869.msg1022922#msg1022922 date=1421006908]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
Fish Continuum Transfunctioner. ;)
This is why we can't have nice things
, why do you have fishing rods, aren't you supposed to catch stuff with those big claws?I never got to be part of the Scouts, it wasn't a big thing around here unfortunately, my version of training was wandering in the woods all summer for ten years of my childhood.....
[/quote]I believe it's a spike to kill fish?
[/quote]Correct.
-
-
[quote author=Higgins617 link=topic=55869.msg1022924#msg1022924 date=1421006983]
[quote author=zoidberg link=topic=55869.msg1022922#msg1022922 date=1421006908]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?It is not a screwdriver. ;)
Oh yeah, totally forgot this wasn't a useless ramblings thread... oopssss :D What is it? I can't really make it out on my phone.
Fish Continuum Transfunctioner. ;)
This is why we can't have nice things
, why do you have fishing rods, aren't you supposed to catch stuff with those big claws?I never got to be part of the Scouts, it wasn't a big thing around here unfortunately, my version of training was wandering in the woods all summer for ten years of my childhood.....
[/quote]I believe it's a spike to kill fish?
[/quote]Correct.
[/quote]No teeth zoid?
-
I am a lm guy all day long, but for fishing I love the gerber flik fish. The one handed use is perfect and the long pliers really get in tight mouth for deep hooks.
-
If anyone is worried about smufing up an expensive MT there is a cheap "homage" to Gerber (ie copy/sort-of-clone) fishing MT sold with long, flicky needlenose pliers. Most commonly sold with a Winchester label, but I have also seen them with a Renegade label. They look like they are made in the same Chinese factory as the Carolina Tools "Gerber-alike" MT.
Here's some examples (NB no connection with sellers, cannot vouch for them, do your own research etc etc):
-
@gregozedobe said:
If anyone is worried about smufing up an expensive MT there is a cheap "homage" to Gerber (ie copy/sort-of-clone) fishing MT sold with long, flicky needlenose pliers. Most commonly sold with a Winchester label, but I have also seen them with a Renegade label. They look like they are made in the same Chinese factory as the Carolina Tools "Gerber-alike" MT.Here's some examples (NB no connection with sellers, cannot vouch for them, do your own research etc etc):
That Phillips looks mint!
thanks for posting though, it really wouldn't be a bad idea to have one like that. Does anyone here have any Carolina tools? -
Yeah I don't think I'll be buying one of those.
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
-
@Gareth said:
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
Ah, yes, I can see that being a bit of a problem. :-\
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
Ah, yes, I can see that being a bit of a problem. :-\
I think it might be okay if you could soak them in T9 BioShield or Even Corrosion Block.
I'm also kinda picky when fishing...I need needle nose but I need regular pliers as well. Most times, dehooking means twisting the hook, and needle nose don't necissarily provide a good twisting grip.
-
I did look at the gerber flik fisherman variants, I like the look of them but for the price and rarity I can't justify wrecking it in the salt water. My Sidekick with wingman scissors seems to be doing the job pretty well for now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


