Fishing Multi Tool?
-
@gregozedobe said:
If anyone is worried about smufing up an expensive MT there is a cheap "homage" to Gerber (ie copy/sort-of-clone) fishing MT sold with long, flicky needlenose pliers. Most commonly sold with a Winchester label, but I have also seen them with a Renegade label. They look like they are made in the same Chinese factory as the Carolina Tools "Gerber-alike" MT.Here's some examples (NB no connection with sellers, cannot vouch for them, do your own research etc etc):
That Phillips looks mint!
thanks for posting though, it really wouldn't be a bad idea to have one like that. Does anyone here have any Carolina tools? -
Yeah I don't think I'll be buying one of those.
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
-
@Gareth said:
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
Ah, yes, I can see that being a bit of a problem. :-\
-
Have you thought about a real Gerber? In the past they've done quite a few fishing versions of various MTs. Things like the Flik Fisherman as seen here, but also fishing versions of the MP600 and MP400. Not sure how easy any of them are to find these days though.
We had used a MP600 on the boat. Not suggested whatsoever. As soon as salsmurfer hit the OHT slides.....she was done....
Ah, yes, I can see that being a bit of a problem. :-\
I think it might be okay if you could soak them in T9 BioShield or Even Corrosion Block.
I'm also kinda picky when fishing...I need needle nose but I need regular pliers as well. Most times, dehooking means twisting the hook, and needle nose don't necissarily provide a good twisting grip.
-
I did look at the gerber flik fisherman variants, I like the look of them but for the price and rarity I can't justify wrecking it in the salt water. My Sidekick with wingman scissors seems to be doing the job pretty well for now.
-
I keep a vic 58mm on my neck lanyard. The scizzors are invaluable for dealing with 6 lb line.
I clean either with an Opinel #8 Stainless or a 91mm Vic Huntsman as the saw is a better descaler than my 91mm Vic fisherman. My fisherman will never touch fish
I remove the hook with long needlenose pilers
-
Lanyard that anchor. This is what I do.
Nice Lanyard Zoidberg. What are the names of the knots you used please. I'd like to try that myself.

Hey mate, really sorry I didn't see your question earlier.
I think the top one is the snake, right is the surgeon's loop or double overhand and down the bottom is the rattlesnake.
The rattlesnake was half done in reverse to house the ends and give clean loops. -
I think it might be okay if you could soak them in T9 BioShield or Even Corrosion Block.
Thats the stuff you want
Boeshield T-9 metal protectant and lubricant. Been using it on vintage classic fly reels circa 1906-1912, Hardy Bro's lead finish reels with great results.Jim
Oh yeah, always carry a lm wave and a hemostat when on the river.

-
That stuff is hard to find down here!!
There is one place that carries it and it's 23.99 for one spray can.
And of course; Yamaha Recomends you soak their Waverunner engine in it after every use........We used to buy it monthly. Until Home Depot started Selling corrosion block in gallon cans
-
Nice one!

-
I think the main reason I want an OHT is just so I can hold a fish in one hand; and open anything with the other.
-
@NKlamerus said:
I think the main reason I want an OHT is just so I can hold a fish in one hand; and open anything with the other.SOG Blacktip or you're just a quitter!!!

-
I wish it was made in an Alox. It would be easier to keep clean.
Victorinox Deluxe Angler
-
I carry a Gerber Evo multitool essential for my outdoors.
-
I brought my wave tonight for a quick hour if bank fishing
WORST decision now that I'm used to the OHT.
Holding a fish and opening pliers sucks.
Not to mention my wave is my "beater" tool. The wire cutters grab, you can't really deploy any inner tools without another pry tool, and my main blade gets harder to deploy as it opens. I'm assuming the post is tightening?
-
@NKlamerus said:
I brought my wave tonight for a quick hour if bank fishingWORST decision now that I'm used to the OHT.
Holding a fish and opening pliers sucks.
Not to mention my wave is my "beater" tool. The wire cutters grab, you can't really deploy any inner tools without another pry tool, and my main blade gets harder to deploy as it opens. I'm assuming the post is tightening?
You can file off the damaged bit of the wire cutters with I diamond file to stop it from grabbing, have you tried loosening the fasteners a little to get the inner tools and blade to open easier? Or even a bit of 3 in 1 oil..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

