New Moras
-
Now that's one I'm much more tempted by.

It is very nice looking!!!

I've been reading widely on the Garberg and have a crazy, sneaking worry that after years of requests by enthusiasts for a full tang Mora, sales won't justify the development/tooling costs and it will be like the Triflex and go away after a short time. Hope I'm wrong because based on what folks say who actually have one, it looks to be a really great a knife and a credit to Mora. You guys have been very fair but on some sites, the comments are angry with many acting if Mora somehow let everybody down by charging so much. It's crazy and kinda sad because many of the people complaining, proudly post $100-150+ knives elsewhere on the site...it's like how dare Mora make something exceptional, like we asked for and then not charge 17 bucks for it like they always do.
Maybe if Mora comes out with a carbon version people will think different.Rant off...
It's not just about going crazy over the price. Sure it's a bit much, but then again every knife in that price range is a bit much when you have severely limited funds.
What ticks me off, and I'm one of those guys who isn't crazy about Mora knives or the scandi grind, is that if you slap some other name on a partial tang or rat tail tang, scandi knife it's ok to charge that higher price.
I've seen a full tang Mora #2 custom clone go for $235. Lapin, Helle, Kauhavan, Enzo, Kellam all make excellent knives but they are all higher priced and will often be outperformed in most tasks by a Mora. And don't get me started on the $400+ bushlore clones that would be better served by different grinds which was proven by Kyley Harris and Cliff Stamp.The question I'd ask those people is would they care if Marttiini or Hultafors did the same thing, would they care enough to go on a virtual rampage?
For me the Mora #1 is working out quite well and it's forcing me to be a smarter user. Now if I wanted a higher priced upgrade I'd probably go with something like the American knife company Forest since that is what I know how to use now.
Well said buddy!
In most folks minds, Mora means cheap and even though it's a knife that was designed and built from the ground up to compete with F-1's, Enzo's etc., the Garberg is way overpriced. Crazy logic. I'm a Mora fanboy, clearly, and think a Classic 1 or 2, a 510 or a Companion HD is probably all the knife most folks (me included) will ever need because they are so excellent in design and execution. As I read one guy say about the Garberg, "Mora is a victim of their own success"...I tend to agree.I'm done griping, it wasn't directed at you guys. Sorry.

BTW styx, you have no idea how much I admire those AKC Forest knives!!!! :ahhh
An awesome woods companion being a cheaper, better thought out Skookum Bush Knife (IMO)!!! I even like the way they use the rare earth magnet as a extra retention device. 
-
Now that's one I'm much more tempted by.

It is very nice looking!!!

I've been reading widely on the Garberg and have a crazy, sneaking worry that after years of requests by enthusiasts for a full tang Mora, sales won't justify the development/tooling costs and it will be like the Triflex and go away after a short time. Hope I'm wrong because based on what folks say who actually have one, it looks to be a really great a knife and a credit to Mora. You guys have been very fair but on some sites, the comments are angry with many acting if Mora somehow let everybody down by charging so much. It's crazy and kinda sad because many of the people complaining, proudly post $100-150+ knives elsewhere on the site...it's like how dare Mora make something exceptional, like we asked for and then not charge 17 bucks for it like they always do.
Maybe if Mora comes out with a carbon version people will think different.Rant off...
It's not just about going crazy over the price. Sure it's a bit much, but then again every knife in that price range is a bit much when you have severely limited funds.
What ticks me off, and I'm one of those guys who isn't crazy about Mora knives or the scandi grind, is that if you slap some other name on a partial tang or rat tail tang, scandi knife it's ok to charge that higher price.
I've seen a full tang Mora #2 custom clone go for $235. Lapin, Helle, Kauhavan, Enzo, Kellam all make excellent knives but they are all higher priced and will often be outperformed in most tasks by a Mora. And don't get me started on the $400+ bushlore clones that would be better served by different grinds which was proven by Kyley Harris and Cliff Stamp.The question I'd ask those people is would they care if Marttiini or Hultafors did the same thing, would they care enough to go on a virtual rampage?
For me the Mora #1 is working out quite well and it's forcing me to be a smarter user. Now if I wanted a higher priced upgrade I'd probably go with something like the American knife company Forest since that is what I know how to use now.
I havent really read much about the Garberg elsewhere so I havent read much complaining on the price other than the little that has been here.
I bet however, that if Mora had made the Garberg under a different name, there wouldnt have been much complaining about the price.
Everyone would complain about the price of a luxurious unusually expensive Toyota, but an expencive Lexus is accepted.As for the No1 I prefer the older models with wider blades, 90degree spine and tang going through the handle. They are great working knives, very comfortable in the hand.

-
Cheers!!! You are exactly right!!!!

...and +1000 My most used Mora/fixed blade around the farm!!!
A very used, 50's/60's Carl Andersson #2

Been filed, been on a grinder, looks like it was batoned with a hammer and yet is still tight, sharp and one of the best working Moras I own! :D
-
Yup AKC have some amazing things going for it. Big selling point for me is that their Forest line is thinner than the Bushcrafter models made by BRKT and Black jack knives.
Now while I do want to try out an F1, it also has it detractors. Mostly the size of the handle. Garberg doesn't seem to have that problem. And for a short blade that thickness again can be a bit problematic, at least in my use. That's the 1 of the 2 reasons why I'm looking to get rid of my TOPS (other being that 1095 and I don't get along).
-
@SAK Guy said:
Cheers!!! You are exactly right!!!!
...and +1000 My most used Mora/fixed blade around the farm!!!
A very used, 50's/60's Carl Andersson #2

Been filed, been on a grinder, looks like it was batoned with a hammer and yet is still tight, sharp and one of the best working Moras I own! :D
That is definitely a well used knife :o

-
@styx said:
Yup AKC have some amazing things going for it. Big selling point for me is that their Forest line is thinner than the Bushcrafter models made by BRKT and Black jack knives.Now while I do want to try out an F1, it also has it detractors. Mostly the size of the handle. Garberg doesn't seem to have that problem. And for a short blade that thickness again can be a bit problematic, at least in my use. That's the 1 of the 2 reasons why I'm looking to get rid of my TOPS (other being that 1095 and I don't get along).

-
Cheers!!! You are exactly right!!!!

...and +1000 My most used Mora/fixed blade around the farm!!!
A very used, 50's/60's Carl Andersson #2

Been filed, been on a grinder, looks like it was batoned with a hammer and yet is still tight, sharp and one of the best working Moras I own! :D
That is definitely a well used knife :o

:D I love that old knife...it looks like the way I feel most days!

-
Cheers!!! You are exactly right!!!!

...and +1000 My most used Mora/fixed blade around the farm!!!
A very used, 50's/60's Carl Andersson #2

Been filed, been on a grinder, looks like it was batoned with a hammer and yet is still tight, sharp and one of the best working Moras I own! :D
That is definitely a well used knife :o

:D I love that old knife...it looks like the way I feel most days!

We all have those days :D
-
And that's the reason why I deeply believe that SAK Guy is like a real life Sam Elliott character that loves his rye whiskey
-
so anyone got experience with Terävä Jääkäripuukko ?
-
so anyone got experience with Terävä Jääkäripuukko ?
No, but I really like the look of those and their design philosophy!
4mm thick blade! I'd definitely like to have a good look at one.
without a sheath they are 40 euros, just good luck finding 'em in stock.
and the philosophy is that they are one store's version of J.P. Peltonen Sissipuukko because of it's limited availability. at least from what i understandand links to both versions
https://www.varusteleka.com/en/product/terava-jaakaripuukko-110-w-o-sheath/51416?lookalsoref=terava-jaakaripuukko-110-w-leather-sheath
https://www.varusteleka.com/en/product/terava-jaakaripuukko-140-w-o-sheath/51417 -
Anybody ever heard of this?
http://bushcraftusa.com/forum/threads/anyone-ever-got-a-bad-mora.177961/
Personally never had any probs like this but then,#1, I'm not really a power user and #2, I always, as a matter of course, put a nice microbevel on mine right out of the pkg. Years later I read that many wood workers do this as well because an RC60 zero grind edge can chip pretty easily.
The soft steel thing is separate issue and is new to me.
Thoughts?
-
Considering that the edge angle on a Mora is really acute it could also mean that the steel was burned or the HT went during the sharpening. Quite frankly it would have been interesting to test that knife and see how far up the issue goes
-
I have never had those problems with any of my Moras.
Mora do have a warranty service, but I have never used it.
http://morakniv.se/en/om-morakniv/var-garanti/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
