Scale replacement question.
-
Really miss my tools on days like this.
-
I use these. But lots of things can do the job. Heating them up gently before removal will help the bushing area not to break.

-
@Corwyn said:
Nope. But it doesn't hurt.Straight way is to put a thin blade at the edge where the toothpick is and pry gently moving to the rivets till it pops open. Afterwards just pop the new ones in place.
The vice is to make sure the new ones are placed firmly and straight with equal pressure on both sides. You could do it by hand or with a plier in most cases but a vice makes it easier (changed dozens of sak scales without a vice).CAUTION: if using a plier or vice put in tons of towels as they might scratch or crack the scales...
Now if you want to be extra sure (and/or if you want to reuse the old scales the safest way is to soak the knife and scales in warm water and soften up the cellidor (not boiling! I melted a pair). The reason is that dry cellidor is brittle and when you force it though the bushings, the outer ring might break and the scales could be ruined.
If you want to change electronic scales, it's even trickier. I found out it works best when heating them with a blow drier to soften them. Put the blade in the battery slot, but take out the battery and door first.
Nice How To: </topic/12903
Nice video: http://www.youtube.com/watch?feature=player_embedded&v=In0HMwJg01g
Is there a special trick that I should know to change out scales that have a light and a pen?
-
Not that I know of. Just remove the pen, pin, tweezers and toothpick before removing the scales. I use warm warm to help soften them.
-
Nope. But it doesn't hurt.
Straight way is to put a thin blade at the edge where the toothpick is and pry gently moving to the rivets till it pops open. Afterwards just pop the new ones in place.
The vice is to make sure the new ones are placed firmly and straight with equal pressure on both sides. You could do it by hand or with a plier in most cases but a vice makes it easier (changed dozens of sak scales without a vice).CAUTION: if using a plier or vice put in tons of towels as they might scratch or crack the scales...
Now if you want to be extra sure (and/or if you want to reuse the old scales the safest way is to soak the knife and scales in warm water and soften up the cellidor (not boiling! I melted a pair). The reason is that dry cellidor is brittle and when you force it though the bushings, the outer ring might break and the scales could be ruined.
If you want to change electronic scales, it's even trickier. I found out it works best when heating them with a blow drier to soften them. Put the blade in the battery slot, but take out the battery and door first.
Nice How To: </topic/12903
Nice video: http://www.youtube.com/watch?feature=player_embedded&v=In0HMwJg01g
Is there a special trick that I should know to change out scales that have a light and a pen?
Hair dryer is the key. Never submerge electronic scales in water
-
I have found that the fine tip screwdriver on the back of my swiss champ fits in the tweezer and toothpick slots perfectly, just a slight twist and the scales pop off without and damage.
-
Ooooh, I just got a set of Green, Red and Black plus scales from someone I cannot thank enough.
I now get to play with which SAK to "upgrade"
Shot Ken! I really appreciate it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login