You all warned me!
-
I am new to modding in the leatherman world. I saw the video on the “Mini Surge” and fell in love with it. I decided “I can do that”. I ordered some parts and started reading everything I could about how to make my wish come true. I paid attention when told that it was easy to screw this up but thought I was ready.
Tonight, I took an older Rebar apart and decided to move the head to my Wave. I did like I was told and went slow and took pictures and everything worked well. I was aware that it would be possible that the tool wouldn’t close with the scissors in place and that is exactly what happened. Not too worried because I had planned on re-shaping the awl from the Rebar and installing it.
This is where trouble started. I took pictures and using the correct tools removed the screw cap from one end. I thought that the safest way not to mess up was to back the shaft out just far enough to remove the scissors and install the awl. Just as I had everything at the right position I slipped and dropped the tool on the bench. You guessed it, parts went everywhere. I went to my pictures and was able to put everything back together in the correct order, almost. No matter how I blow up the pictures I can’t seem to figure out where two little silver washers go.
I know there has to be someone who is now sitting, laughing and thinking what a newbie. I would really appreciate it if someone could look at the end of their wave (scissors side) and tell me the correct order that all the pieces go in. I also am a little vague on the location of the built in lanyard holder.:(
-
I'm little to no help as real mods haven't started yet.
But I can tell you that the built in lanyard ring slides in and out of the end where the wood saw is. In fact, the tip of the Saw rests on the lanyard ring if it is pushed in.
-
Thanks, That is how it is set up. At least that part is correct.
-
hello, and welcome to the forum!

the washers you're referring to go in between the handle tools of the Wave. you'll notice that the washers are "tabbed", and have flat spots on the interior to line up with the flat sides on the pivot in that end of the handle. this makes them a pain to install, but it helps to prevent the tools from clumping.
this thread has some good info on what tools go where in a Wave.
btw, are you referring to the Mini Surge video review in this post?

-
Thank you for the welcome
I appreciate the help. When I was putting things back together, I assumed that was the order that they went in. I know the definition of ass-u-me and wanted confirmation before putting on the locktite and tightening things down.
I am indeed speaking of the Mini Surge in that post and am honored to get my needed information from someone so talented.
I very much admire the work and also the number of times that I came across your name in helping out those who need it. I hope that you don't mind my copying your work. I am deviating from your design some by putting a set of Vic scissors in my tool. I carried SAK for years and always preferred their scissors. I took a pair from a old junker that was laying around the shop and plan to drill out the pivot and install them.Again, Thank You for the help.
-
@Set001 said:
Thank you for the welcomeI appreciate the help. When I was putting things back together, I assumed that was the order that they went in. I know the definition of ass-u-me and wanted confirmation before putting on the locktite and tightening things down.
I am indeed speaking of the Mini Surge in that post and am honored to get my needed information from someone so talented.
I very much admire the work and also the number of times that I came across your name in helping out those who need it. I hope that you don't mind my copying your work. I am deviating from your design some by putting a set of Vic scissors in my tool. I carried SAK for years and always preferred their scissors. I took a pair from a old junker that was laying around the shop and plan to drill out the pivot and install them.Again, Thank You for the help.
you are very welcome!
you'll find we're a pretty helpful bunch around here. :Dwere you able to get the Wave back together with everything in the right order? feel free to post some of the pics you took if you'd like me to take a look. also, please feel free to post pics of your finished mod.

I don't mind you "copying" the Mini Surge at all... and I don't even really consider it "copying" to begin with. the original idea for the tool layout of the Mini Surge came from Kampfer, and its popularity has really taken off ever since he sent it in for that video review. if you browse through the Mod Squad forum, you'll find that we share our ideas and learnings with each other... I certainly don't consider any of it to be proprietary information, and I'm sure the other modders would agree. ;)
good luck with the 91mm scissors! I did the same thing recently, but haven't gotten around to posting pictures (or finishing the mod, for that matter).
EDIT: I know there are a couple good threads (with pics) about putting 91mm Vic scissors into a Wave/Charge, but I can't seem to find them at the moment.
-
Hi welcome to MT.o
Glad you like the Mini-Surge, I know I do. :D
Sorry didnt see this until now, hopeful you got everything under control, if not I am sure members here will jump in and sort it out for you.
I am a little disappointed with scissors on Mini-Surge, it does not outperform vic 91mm scissors by far. I would like to wrap that in future. -
Breezy
I was able to get everything back together in the correct order. I have not put locktite on the screws yet, in case I have to adjust the tension.I plan on sharing pictures when everything is done, if it doesn't look like it was disfigured in a horrible industrial accident. I have yet to complete the scissors mod. I don't have carbide bits but am using a 7/32 Titanium coated drill bit. It is working slowly but I had to stop to take it to work to sharpen to finish.
Kampfer
Your tool and research along with Breezy's work are the reason that I am attempting this and I appreciate the encouragement.Now for my next question. When looking around at those who have done the Vic scissors mod, everyone seems to replace the serrated blade. I use this blade occasionally but never use my wood saw. I know that the Vic scissors are closer to the thickness of the blade than the saw, but could I replace the saw instead? Looking at the frame there is room for the scissors in either location. I am wondering if the total thickness of the head and two thicker tools would be a problem. I have searched but can't seem to find anyone who has done the scissors in this manner. Of course I may just be searching the wrong term.
-
@Set001 said:
Breezy
I was able to get everything back together in the correct order. I have not put locktite on the screws yet, in case I have to adjust the tension.glad to hear it!

@Set001 said:
Now for my next question. When looking around at those who have done the Vic scissors mod, everyone seems to replace the serrated blade. I use this blade occasionally but never use my wood saw. I know that the Vic scissors are closer to the thickness of the blade than the saw, but could I replace the saw instead? Looking at the frame there is room for the scissors in either location. I am wondering if the total thickness of the head and two thicker tools would be a problem. I have searched but can't seem to find anyone who has done the scissors in this manner. Of course I may just be searching the wrong term.based on my experience with the mod I am currently working on, I can confirm that yes, the Vic scissors can easily fit in place of the saw or the file. :D
-
Right, I chose to replace file with sicssors is because:
Even though I dont use the saw often, but I believe when saw is needed, nothing else can do its job.
File isn't needed often as well, but I EDC a Surge file, it can be use without being attach to MT.
Lastly, I figured out a mod that file can attach to Mini-Surge. </post/914049> -
Thanks for the encouragement. I have finished my mod. I started a new thread with photos.
-
always happy to help.

nice work on the mod!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login