Gerber
-
Hey Dunc, will you be changing your avatar picture to a Gerber?
......I might want your old one..... :D
-
Something like this you mean?
Def

-
-
Do not worry, MP600s do not have the of ending awl (well the Fisherman has but that is not a standard MP600) so you will not be tempted. ;) If you do forget to put thread lock on the axle screws after or if you adjust them it still will not drop to bits because of the excelent design of those axles that need a sharp blow to loosen them even if you are wanting to get them out. (Still have not got round to thread locking the ones on the Cable Cutter when I reasembled it and they have not budged).
I do not know anyone here with SwissTools but I do have a friend who quickly made a LM unusable. :(Dave
-


Anyone want to tell me anything about them
Dunc
-
I'm no expert on Gerber identification......they have a habit of changing the name of a tool every time they substitute one or two blades. That being said, I believe the bottom picture is of a standard Gerber 600 Multi-Plier. (There was also a version called the "Sportsman" which had all the same blades, but a rougher, coarser, sand-blasted finish.)
Your top picture I believe is a Pro Scout, which is the same tool but with scissors and blade exchanger substituted.
-
Many thanks :) I do like the one handed plier opening system they use ,
Dunc
-
-
@dunc5 said:
Anyone want to tell me anything about themDunc
I've got both...the blade exchanger is handy, and the RemGrit saw it comes with is pretty tough on anything. The scissors are pretty good also, easy to get out and put back in. Smooth action cutting, but the cutting area is small.
The file is good, it was the only file that would fit in an area of my new Craftsman 2.5 ton jack. Where the handle attaches to the main unit, the groove wasn't cast that great, so I needed a small but strong file to correct it. A few mins with the Gerber and it was like new (well, like it SHOULD have been...Craftsman...but made in China ??? )
I also used a 600 a lot when installing a stereo in my car...lots of stripping and cutting wires, bending stuff with the pliers...
-
They arrived today :) Both in as new condition , just needed a clean as the oil on both had dried and gone hard and gunky , there was a couple of rust spots too .But all cleaned and re-oiled now . The sheaths are like new too .I have sharpened the blades on my sharpmaker with very good results except for the serrated blade and part serrated on the Pro scout , the sharpmaker wouldnt touch the serrated angle so I had to do them freehand .I tested the removable saw blade out and it was no where near as good as a SOG or Swisstool but you can get different blades , can you get this type easily in the UK ? Its strange when I first held it , it felt like getting and old friend back rather then the POS one I had 7 or 8 years ago . At least these two models dont have an awl to break ;) Although I have been guilty of slagging Gerber off big time ( because my old one broke ) It did save the day when my car exhaust broke in two and I fixed it by cutting off the ends of an empty de-icer airasole can with the serrated blade and slidding it over the exhaust as a sleeve enabling me to make my noisy way to the garage to get it fixed .So its been a while and my views on tools have changed so maybe its time to give Gerber a second chance :o I'm going to EDC one for a while and see what happens ( the Swisstool will be coming along to just in case ;) ) . I will be sure to let you guys know how things go .
Dunc
-
@dunc5 said:
I tested the removable saw blade out and it was no where near as good as a SOG or Swisstool but you can get different blades , can you get this type easily in the UKDunc
Dunc
I got one of these sets-If you Google for draper jigsaw sets you might find someone cheaper or including the pp in the price. ;) The fitting is called "Black and Decker".
Found out the type's I used the most out of the sets and bought those style's in sets of three when needed. They last for ages. The ones I use are the finest tooth and the medium 24tpi&12tpi YMMV.
May you have a different experience with this one my pro scout has had daily use since I got it and the only reason I have stopped using it was I wanted a bigger plier so you should be ok.Dave
-
@dunc5 said:
So its been a while and my views on tools have changed so maybe its time to give Gerber a second chance :o I'm going to EDC one for a while and see what happens ( the Swisstool will be coming along to just in case ;) ) . I will be sure to let you guys know how things go .Dunc
Sounds like you got a couple nice tools for a good price Dunc. I look forward to hearing more about how well they compare to your Vics. Send us some more photos when you get time.
~Bob
-
Had a bit of trouble getting my Sharpmaker to the right angle of the Gerbers serrated blade until I done this :D

Now its perfect .New pic uploaded to the picture thread btw
Dunc
-
I can't wait to hear how they treat you once you get them out in the "real world." Many of us here either look down on, or dismiss Gerber, and I really don't think that's right. Gerber makes some really good stuff. My Clutch is a great example of that- I personally feel that it's a heavier duty tool than the Squirt, and somewhat handier due to the nail file.
Gerber has some great tools and I am glad to see someone giving them a second chance.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login