Swiss Grip.
-
Ok I'm going to jot down a few words about the awesome Swiss Grip

Initial Thought's
Well this is definetly a tool not to be taken lightly, in fact I'd go as far as to say it's HUGE, but strangely not all that heavy in the hand :), having said that, I feel it's far to big for pocket carry, and unless you wear a duty/tool belt it's not going to be practical edc, but in a bag or glove compartment, it would reign supreme


Build Quality
In a word brilliant :), even on this second hand example, the Swiss quality just shine's through, all the tools deploy smoothly, there's not a hint of rust, and it still feels as tight as the day it was made despite having had quite a hard life by the looks of it :). I fully expect this tool to be functioning perfectly for a good few years to come.
Pliers
Now I know Flat nosed pliers aren't everyone's cup of Earl Grey, but everyone should at least have a play with a Swiss Grip just to see just how tough an MT's plier set up can really be :), obviously having needle nosed pliers would have been a sales advantage for Wenger, but to my mind it would have made an already large tool, unacceptably big, ally that to the fact that you can really bear down on this pliers type with no fear of breaking them

Individual Tool's
Knife
Now this really is the Crocodile Dundee of knives :o, it's been called a folding machete, and not without good reason, it's huge :D, unfortunatly it's a clip point, but that's a personnel prejudice rather than an actual fault, it hasn't got much in the way of belly, but is a damn fine slicer for all that, and best of all no silly serrations

The deployment of the blade and lock, are both smooth and secure, with a very small ammount of play in the blade, which looks worse than it actually is because of the length of the blade.

Saw Blade
Now were talking!, this is a true pocket chainsaw if ever there was one :), proper double cut teeth so you can cut both ways, and very little evidence of clogging on any of the soft and hard woods I tried it on :), it did have a preference for green woods though.
And despite it's length there's no flex in the blade, even when you start to tire and use less than perfect cut angles

Metal File/Saw
At first I though it odd that they put such a incongruously small file on such a massive tool, but thinking about it, if it was much longer you run the risk of snapping it through improper use due to the higher temper of such tools, good bit of thinking Wenger.
In use it's broadly similar to the files on early generation MT's in as much as it get's the job done, but it takes a while due to the general lack of aggresion in the files teeth, it's not really a problem as all tools of this wintage are the same

Can/Bottle Opener
While usable I didn't much like it as it pierced the tin far to much making it a lot slower than is really necessary, and leaving a less than clean cut, which is a pain if you recycle all your tin's as i do. I didn't test the bottle opening facility as I'm a tea totaller, but given the size of the tool, it'd probably have enough leverage to catapult the bottle cap into orbit

Likewise the wire bender worked well on brass snare wire


Screwdriver's/Bit Driver
Now I really like the the onboard flathead screwdrivers :), stoutly constructed, and with a long reach, I found them easy to use even on fairly recessed screws :), the phillips, while sensibly small in width, lacked a lot of reach, and has similar drawbacks in use as most other Sak back mounted phillips's, not a problem once you aware of it's limitations, but a disapointment perhaps to the first time user.
The bit driver is a fantastic piece of latteral thinking on Wenger's part, but it's a bit of a mixed blessing in reality, as the bit's are comparitively short, and you soon run out of clearance when actually using the tool, as it just wont work in any kind of confined space

Awl
Now this was a good effective tool, it's a shame they couldn't mount it out the front like on a Farmer say, and not putting a sharpened edge on it is a considerable oversight, but for all that it works well as a wood drill

Conclusions
On the whole this is a genuinely praise worthy tool, it is big and does suffer some limitations due to its size, but only when using it's phillips and bit drivers. It is very comfortable in use, and has no hot spots or annoying rattles, and comes in a decent, hardwearing cordura sheath

So on the whole if you have need of a large, very heavy duty tool, for rucksack or vehicle edc, I wouldn't hesitate to get one, but don't hang around as there becoming rarer by the day

-
Thanks To Grant for lending me the tool

And that's a Vic Huntsman and CS Ghurka Kukri for scale

BTW sorry for the crappy pics, I'm just getting used to my camera

-
-
-
@micky d said:
Thanks To Grant for lending me the tool
And that's a Vic Huntsman and CS Ghurka Kukri for sale

BTW sorry for the crappy pics, I'm just getting used to my camera


-
No not for sale

-
-
I like the Swissgrip quite a bit. It's not nearly as huge as everyone accustomed to folding multis feel; just not pocketable. The finish is superior, obviously, though you can tell it's a Wenger by the tools not snapping into place as they ought to. The blade lock is somewhat uncomfortable to release, but on the plus side, rock solid. Also, it's dreadfully ugly.
Everything else on it is just brilliant. I spent a great deal of time picking a multi, and I'm happy to say that my choice was correct.
P.S. I didn't even know that was a can opener. Thanks!

-
-
Well the snap's not Vic good, but consiederably closer than the competition

-
Great review as usual MickyD. Mine does not have a phillips, but a corkscrew (which i like better), so i have to rely with the included bits. Talking about this bits, you can find a lot o variety, and there are some long enough to use with the bit driver without worrying about the space.
What really shines about this tool (and in all the ranger series) is the "two man operated" saw :D, it can substitute a dedicated folding saw.
Well, have fun with the SwissGrip, i think you are going to really enjoy this tool.
Carlos
-
Thanks mate, the saw really is my star of the show too, it's bloody awesome

-
Excellent review!!! It was a great read!
I have a SwissGrip with a philips driver as well.. I can honestly say that it makes a lot of other tools look weak.. It is an absolute MONSTER! I have to second the amazing saw.. I really like Wenger's saws in general.. I LOVE my SwissGrip but I never really carry it..
Like I said before, excellent review!!

-
I forgot to praise the OP: very detailed and accurate review, hits the nail on the head with the metal file in particular. I was amazed to see just how tiny the thing was.
though you can tell it's a Wenger by the tools not snapping into place as they ought to.
Can't say I have ever heard of that complaint with Wenger?
It's not so much "it's a Wenger", as "it's not Victorinox". The snap I know and love from my other SAKs is simply not there. That said, it makes the tool feel like an actual tool, which isn't so bad.
-
Thanks for the comment's guys

-
So is the Wenger grip still made? And who do I have to sleep with to get one?
-
I hate to ruin your fun...
Can/Bottle Opener
While usable I didn't much like it as it pierced the tin far to much making it a lot slower than is really necessary, and leaving a less than clean cut, which is a pain if you recycle all your tin's as i do. I didn't test the bottle opening facility as I'm a tea totaller, but given the size of the tool, it'd probably have enough leverage to catapult the bottle cap into orbit
I believe that's a straight bottle opener, is it not? Wenger's can opener is a very different looking beastie:

Their combo tool is an even odder looking contraption:

That might explain why you had so much trouble with it!

Def
-
-
@gafftapegreenia said:
So is the Wenger grip still made? And who do I have to sleep with to get one?We did a group buy not too long ago- contact Tim at fveap@sosakonline.com to see if he has any left, or will order some. They have been discontinued, so get them while you can!
Def
-
@Defender said:
They have been discontinued, so get them while you can!Def
Funny you mention this. It seems that here, the distributors have the SwissGrip with corkscrew as part of their regular line, but maybe i'ts a special run (bloody expensive, by the way).
Carlos
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login