Electrician
-
@Huntsman said:
Gonna stick my neck out here.I like the Electrician - I have one - And the flat sheepsfoot blade is very handy.
But to me the stripping blade is all wrong.
It's awkward, if not unsafe, to use - A much better design would be to have a small, sharp notch - like on the Swisstools - for stripping.I would tend to agree with you. I rarely if ever use it for wire stripping. I find it most useful as a small slicer for opening boxes, stuff like that. I'd like it to be without the cutout, and no chisel grind. That's why I've had Syph make a few up for me with the small pen blade instead.
In about every case where I've needed to strip wires, it's a planned task, so I've a couple dedicated wire strippers in the tool box. But in a pinch, the SAK will work if needs be.
-
Here's mine. I had a heck of a time getting the blade sharp and ended up adding a 10 degree edge on one side and 20 on the other. Looked like the previous owner had issues as well since the blade was scratched and quite dull when I got it.

-
Bantam Electrician?

-
Bantam Electrician?
Can't tell by the picture. Is that 85mm?
Yes => 84mm
It is a new Bantam that I just got, set on top of my 84mm "Radio Shack" Electrician with the blade open. I've been doing some comparisons, at least what I can, without taking them apart (yet). I may do a custom job on it sometime to create a Bantam or Cadet Electrician. -
Bantam Electrician?
Can't tell by the picture. Is that 85mm?
Yes => 84mm
It is a new Bantam that I just got, set on top of my 84mm "Radio Shack" Electrician with the blade open. I've been doing some comparisons, at least what I can, without taking them apart (yet). I may do a custom job on it sometime to create a Bantam or Cadet Electrician.Now I get it. And sorry for the 85mm mistake. Its Wednesday, you know.
-
Bantam Electrician?
Can't tell by the picture. Is that 85mm?
Yes => 84mm
It is a new Bantam that I just got, set on top of my 84mm "Radio Shack" Electrician with the blade open. I've been doing some comparisons, at least what I can, without taking them apart (yet). I may do a custom job on it sometime to create a Bantam or Cadet Electrician.Now I get it.
And sorry for the 85mm mistake. Its Wednesday, you know.
-
The Electrician I ordered last week arrived today. It's my first Alox. Pretty impressed with the quality and really love that electrician blade!

-
Another alox infection....

-

My personal favorite is an Electrician Plus with a clip added.

-
My latest Electricians :ahhh


-
The Electrician doing what it does best.


-

Can we see more pictures?
I just finished building it today. I took apart an old 84mm Victorinox "Radio Shack" Electrician's knife I had to obtain the blade and found out it is the same blade used in the 93mm Alox knives. It even has a 3mm hole for the larger pins. You can see the hole sizes on a picture in this thread. (Scroll down on this link to see additional pictures.)
</topic/59339
-
[/quote]
I just finished building it today. I took apart an old 84mm Victorinox "Radio Shack" Electrician's knife I had to obtain the blade and found out it is the same blade used in the 93mm Alox knives. It even has a 3mm hole for the larger pins. You can see the hole sizes on a picture in this thread. (Scroll down on this link to see additional pictures.)
</topic/59339
[/quote]Ah, that's good to know kosmo. I've an older beat up Radio Shack but the eblade is fine, so I may have to come up with something to have modded now. Nice. Need another modded electrician. Don't have one for each finger yet. Lol.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

