mp600 question
-
Sounds like a mod job to me. The awl does exist, but not on many models. The mod could be made with a BO bluntnose MP600 and BO diesel. I prefer the length of the Diesel scissors, and the lobster claw can opener could be used as an awl.
-
Yeah, that awl is a tough ask. As Al said; it does exist, mostly on the Fisherman models IIRC, but I'm not sure I've ever seen one in BO.
If you look around you might find a BO MP600 Pro Scout with blunt pliers. Also have a look for the Bladeless MP600, I think that might suit you.
-
Dang, I just looked at the Bladeless and it's not got blunt pliers. :-\ My memory playing me false.
-
-
That's impressive zoidberg! So what is involved in the mod? So you can't just buy parts, you have to cannibalize them from other tools? What's needed to take them apart?
Has anyone snubbed the nose on a BO Diesel?
MP600 Pro Scout with blunt pliers doesn't appear immediately available let alone one in black.
-
So what is involved in the mod?
You have to find a combination of tools and washers that fit the handle and clear the pliers.
So you can't just buy parts, you have to cannibalize them from other tools?
Correct.
What's needed to take them apart?
I did the first one with pliers.
Now I use an empty handle as a spanner.
And a lighter to heat the loctite.Has anyone snubbed the nose on a BO Diesel?
I don't know about the Diesel but with the MP600 the stock needle nose has a smaller nut gripping area.
What you really want IMO is the stock blunt nose. -
Thanks, Z. Same story for washers as parts?
-
-
What about an mp400? Similar path?
-
@zoidberg said:
Has anyone snubbed the nose on a BO Diesel?I don't know about the Diesel but with the MP600 the stock needle nose has a smaller nut gripping area.
What you really want IMO is the stock blunt nose.It's the same with the diesel. The BN has a thicker width than the needle nose. I wonder if Gerber made blunt nose diesel would that kill sales of the 600? ???
-
Thanks, Z. Same story for washers as parts?
All good mate.

Yes the washers also come from the donor tools.
Get three MTs.
From these you can make two MTs, one you want and one for backup.
The third gives you extra washers, some spare replacement tools and a handle to use for a spanner.[list type=decimal]
-
BO blunt mp600 base or army
-
BO Diesel
-
BO ? Bladeless?
-
-
@buck said:
http://m.ebay.com/itm/201288827445?_mwBanner=1What about an mp400? Similar path?
Newer MP400 models use the same tools as the newer MP600 models but not the plier heads.
The one you linked to is an older model known here as mr pinchy, non locking with a different fastener.
I've not had one so don't know about that generation. -
Thanks, Z. Same story for washers as parts?
All good mate.

Yes the washers also come from the donor tools.
Get three MTs.
From these you can make two MTs, one you want and one for backup.
The third gives you extra washers, some spare replacement tools and a handle to use for a spanner.[list type=decimal]
- BO blunt mp600 base or army
- BO Diesel
- BO ? Bladeless?
I don't see how it's possible to wind up with 2 tools with scissors (out of 3).
-
Thanks, Z. Same story for washers as parts?
All good mate.

Yes the washers also come from the donor tools.
Get three MTs.
From these you can make two MTs, one you want and one for backup.
The third gives you extra washers, some spare replacement tools and a handle to use for a spanner.[list type=decimal]
- BO blunt mp600 base or army
- BO Diesel
- BO ? Bladeless?
I don't see how it's possible to wind up with 2 tools with scissors (out of 3).
Sorry, could you reword that? Also I'm not sure what can be swapped between a Diesel and a MP600.
-
I'm just trying to figure out how you get 2 tools out of 3 (your words). Which 3 do you start with?
Forget the diesel, just a guess on my part.
I would want the 2 tools I wind up with to both have scissors and I don't see how that's possible.
But maybe you know otherwise.
-
@buck said:
I'm just trying to figure out how you get 2 tools out of 3 (your words). Which 3 do you start with?Forget the diesel, just a guess on my part.
I would want the 2 tools I wind up with to both have scissors and I don't see how that's possible.
But maybe you know otherwise.
Okay, I'm with you now. You choose the MTs that contain the tools you want.
The tools are different thicknesses. If you can make the MT you want from two MTs then great. You take the tools you want and put together a MT. The left over pieces however might not go together for the second MT.
I didn't mean to confuse you with the idea of using three MTs. I just found that the more parts I had the easier it was to find a combinations that work well. By using the third MT as fodder for washers and a fastener spanner it also gives you some spare tools and more options for putting together a decent second MT.
-
I like 50ft-trad's idea of using Diesel scissors and can opener->awl.
But could it also serve as spanner? -
And thanks to all for the ideas and suggestions.
-
Part way there. A used army mp600 with scissors.
I wonder if I can just buy a blunt head from Gerber, maybe through warranty. SOG does that.
Anybody know?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


