Strops
-
Use 2 part epoxy and Glue a strip on a foot long 2x2. Its good to see a thread on stropping
-
Wood ;)
/post/385782

-
@Sparky415 said:
Wood ;)/post/385782

Thanks!
Like I said I've been reading through old posts, I've seen that thread (remember the pink belt!
) but didn't give it much attention.
Other threads on sharpening, those polished bevels......that sure got my attention :DCheers
-
As mentioned above, wood
It seems to give a more uniform, straight surface.
Use a suitable glue. I used the rough side of the belt as my stropping (upside) surface.
It is one thing that once you make it, right, it lasts forever.
-
Hi Everybody
I bought a piece of Miranti on Saturday, used a piece and carved out a slot for my sharpening stone, and another piece got some leather stuck to it! 8)
Result? Sharpest I've ever managed to get a knife......which is good, but not saying a lot.
I'm however motivated to improve until I get to shaving sharp.
Thanks for the advice.
Cheers
Gerhard.And yes, I know I owe you pics, but it's winter here and to be perfectly honest I'm very surprised I managed as much this weekend as I did :D
-
Strops are the way to go for finishing an edge. I made mine out of an old wooden cutting board with leather from a leather supplies . I rub a little honing compound on every now and then as well.
-
Yup......maybe I should ask....
I used a polishing compound that reportedly removes P1500-P2000 marks to impregnate the leather - sound good?
-
If you want to give the blade an extra polish or sharpness use a compound. I just use it to remove any burr; to finish off and stabilise an edge I am happy with, so I do not use any compounds.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login