Davechamp CX+
-
A couple of months ago, I posted in these forums that I was going to attempt to build a "Kitchen Sink SAK" and placed an order with Rotokid for some pinstock, scales and a few other bits and bobs that I thought I might need. As I never attempted anything remotely like this before, I ordered plenty of stuff, just in case.
As I couldn't bring myself (or afford) to smash up perfectly good knives for something that potentially could end up in the bin, I contacted a few ebay sellers and begged in these forums for cheap, old, beaten knives that people wouldn't miss. I quickly found that some of the SAK tools are much harder to come across that others! For example, it wasn't until Neil (NKB) sent me some old champs that I could lay my hands on a magnifying glass, disgourger and other tools that only feature on the more expensive models - so Neil - I thank you! knife blades however, I now have about a dozen, as they are on every knife I gathered!
After it dawned on me that the only way I was going to build an XLT sized knife was to actually buy an XLT so I could extract the more unusual tools from it! So I decided that I should build something like the Swisschamp. I actually own a real Swisschamp, so I thought it would be useful to refer to when trying to figure what backspring fitted where etc. Eventually I thought, this is my first attempt, so I'll go with the proven formula and the Davechamp CX+ was conceived

I've setup a photobucket slideshow (click here) with some pics I took along the way, so you can see how I went about it:
Here is one of the Champs that Neil sent me :D (It wasn't like that when he sent it me - lol).
<a href="http://s36.photobucket.com/albums/e10/DaveK-ToolPics/Davechamp CX Plus/?action=view&current=48acb688.pbw" target="_blank" rel="noopener noreferrer"><img src="http://s36.photobucket.com/albums/e10/DaveK-ToolPics/Davechamp CX Plus/th_SAK_Mod023.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Now that it's complete, I'm very pleased with it. It's no Scibeer job - that's for sure. There are many imperfections, especially with the scales as it took me a while to figure out how to work it, but it's not terrible. Although I did my best to restore some of the components, some are a little tarnished, rusted or scratched, but this doesn't concern me too much, these knives would have been binned and I saved at least parts of them!
The knife itself is solid and tight, and in use is indistinguishable from my "real" Swisschamp, and that was the goal. With a bit more practice, I hope I can improve and focus more on the finish, but for now - I'm off for celebratory beer (guess what I'll be opening the bottle with ;) ).

-
You're truly an environmentalist. You've taken a bunch of scrap metal and turned it back into a working tool.
Well done chap 
Now you've got the hang of it, what's next?
I bet you've still got a pile of bits to play with.Let me know if you need any more parts.
No shots next to the Skeletool CX? or didn't you want to show up the LM ;)
Neil
-
Great job Dave! Kudos to you for taking the plunge and actually attempting a project of this magnitude. And the fact that you have a successful result in the form of a beautiful knife is the best reward! 8)
-
What are you doing up at this time of night - I thought only I was that daft!
Thanks for the kind words - I appreciate it.
Next, I think I'm going to go for a much smaller knife and try and get the fit and finish a little better - see how much I learnt from my mistakes! Any suggestions for a combination of tools? I was thinking only 2 or 3 layers next.
And parts? I'm always in the market for parts :D
Cheers,
-
You forgot the jewelers screwdriver in the corkscrew :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
-
Bloody good effort mate
, I'd be dead chuffed with that if it was my 50th mod let alone first :)Damn fine work mate :)
-
hmmm hmmm,the more i see these "take it apart and make it new your way",teh more i start to search for sak pliers,files,saws,phillips tools for them.i could easily make that assemply-plate for axle pins too,but here they dont sell those axle materials,damned.i would like to build a tool with out knife blade at all,with just pliers,file,saw,phillips and flat drivers,and awl.with orange alox 8)
your carbon tool looks way cool man

-
@DaveK said:
What are you doing up at this time of night - I thought only I was that daft!Thanks for the kind words - I appreciate it.
Next, I think I'm going to go for a much smaller knife and try and get the fit and finish a little better - see how much I learnt from my mistakes! Any suggestions for a combination of tools? I was thinking only 2 or 3 layers next.
And parts? I'm always in the market for parts :D
Cheers,
I couldn't sleep last night so thought I'd leave you sarcy replies instead ;)
I 'd say go for a nice edc knife next. What about a Scientist or a Yeoman? Both are popular, slim but discontinued knives so would definitely be worth hammering out.
Neil
-
That is real impressive Dave! :o
Good job! :)
-
Nice work, Dave. That project looks like an excellent way to learn about what goes on underneath the scales. :)
-
@BIG-TARGET said:
You forgot the jewelers screwdriver in the corkscrew :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhhNo I didn't! I decided not to get one as I've always thought those things look a bit cheap and nasty tbh. I have one on my real Swisschamp and never, ever use it - so I thought I'd leave it for this one. I also used the old corkscrew with the groove as I thought it was a bit more interesting!
-
really nice job Dave!

(and nice picture too!) amazing job for your first~!
thx for sharing that ;) -
@WhichDawg said:
really nice job Dave!
(and nice picture too!) amazing job for your first~!
thx for sharing that ;)Thanks!
I made a nice lanyard for it too, but as I was trying to get a decent pic in the fading light, a face appeared.......

Ah well, back indoors with the Flash:

-
Before someone else does it....

-
You mean, "Before WhichDawg does it" :D
-
I think the bunny's more worried about being skinned by it :D
-
More likely (its a rabbit remember) wondering if the lanyard is edible :)
Neil
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login