Kampfer's PPP
-
Cappy like.

-
Very nice!
Im a very big fan of the smaller SOGs. I like the PPP and paratool alot. You've really got this one setup nice.
-
Nice SOG Kampfer.
That's us mobile.
Nate -
I like that one, nice work Kampfer.

-
Very nice mate,i agree on the juice line :-\ the ppp is one mt i regret trading,i had mine bladeless

-
Scissors test, pass.
-
Is that the original SOG Phillips, Kam? It's good with #1, but very poor on larger screws. If you're still planning on harvesting the scissors and file from a PST II, I'd recommend switching the Phillips too.
How are you finding the "gears of madness" in screwdriver mode?
-
I hadn't have much trouble with the Phillips nor "gears of madness".
The SOG scissors are good enough for the time being as I don't use them much and I don't prefer mixing brands together.
-
SOG can opener is one of the worst ones I ever used, I call it Can't Opener so I aren't sorry to grind it down to be a better flathead driver.
-
Put a serrated blade on KP³ instead of pain edge, a dedicated folder would be carry alone with the tool.
SOG states the scissors is not comparable with Power Pocket Pliers, because the scissors is actually taller then other SOG implements, when installed in Power Pocket Pliers, the scissors stick out. (see 2nd photo) In order to fit serrated blade in, I ground the blade spine down a little to give clearance to scissors so the handles can be fully close. I just need 1.5mm of space, but that is exactly where the blade has its nail nick, so I ended up grind down 3mm all the way across the spine... :-\
-
The changes I made:
Replace file with scissors
Replace partially serrated blade with full serrated blade.
Replace 1/4" drive with large flathead and awl.
Rearranged everything.
I grind down the blade in order to make the scissors fit in.
Added two thin washers between blade and the next tool to reduce clumping. -
You could grind a nail nick into the tip of the blade, kind of like Leatherman Blast/Kick/Fuse saw and file tools.
-
@tallowwaters said:
You could grind a nail nick into the tip of the blade, kind of like Leatherman Blast/Kick/Fuse saw and file tools.I have no trouble pulling the blade, I would just leave it as it is for now.
-
I do like the pocket power plier. Simple, light, compact and very useful. The leather sheath is very nice too.
-
@shibafu said:
I do like the pocket power plier. Simple, light, compact and very useful. The leather sheath is very nice too.Yes and it is very slim. Unlike its bigger brothers, PPP has no wasted space inside.
No a fan of Powerlock nor PowerAssist.
Kinda silly to have a tool in size of a Surge but implements in size of PST....
PowerAssist is also overly complex. -
You inspired me to buy a PPP from eBay. While searching for scissors to add, I found other parts for $1 each.
Sent from my XT1575 using Tapatalk
-
I like the spring setup for the scissors. Are they off another SOG tool?
-
They are standard SOG scissors. Some tools have them, some dont. But you can get them form SOG to put on your tool. SOG allows the owners to change/customize there tools and it will not void the warranty.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

