Trying To Pick A Multitool
-
I know people have asked help in picking the 'best' multi lots of times but I am looking to find one that's just 'adequate'. I don't need the biggest or newest just one to carry when I'm working in the yard so I don't have to run to the garage or house for a tool. Last week I was cutting some wire fence to keep the rabbits from eating the shrubs this winter and I ended up going all the way to the basement for some needle nose pliers with side cutters. I had a SAK with me but it couldn't get the job done and that's when I thought I wish I had some basic Multi with me. Flat blade, Phillips and pliers are the main thing. Any suggestion?
-
Rebar or wingman would probably do well for you
-
Guess it all depends on your price range vs tool complement.
Aside from the small keychain/pocket tools, at the lower/mid range spectrum and considering you have an SAK with you, the LM Sidekick or Gerber MP 400 would do nicely. It you head to the higher range spectrum, a LM Rebar or Wave, or a Gerber Strata or MP 600.
So many to chose from, all with Pro's and Con's, but get something you'll like and carry and work from there.
-
Leatherman Rebar
-
I'd expect a lot of various answers on this, but personally, I would buy a used tool before a "cheaper" tool. You won't feel bad for pushing the tool if needed, and it won't set you back too bad to try a couple options.
For light-medium duty, I'd look for a used Leatherman PST. Easy to carry, no frills. A Rebar would handle a bit more abuse, with larger pliers and replaceable wire cutters. It's also still in production if you don't like the used idea. ST300 is the heavier duty version in the same form factor.
Do you carry a dedicated knife? These options have all internal tools, if you need outside accessible tools/blades, I'd have a different list.
Edit: typing difficulties
-
Another option is a Leatherman Fuse. Out of production for a couple of years, but still lots of them (new) on eBay.
Wonder why? -
Thanks for the replys. I was thinking some model of LM just because that's what most people think of when you say multi tool. I noticed no one mentioned any Swiss tools. I'll look on that site for some of the ones mentioned (rebar).
-
I'd say LM Kick, PST, PST2, or Original Supertool all these can be found pretty inexpensively on the bay or in our for sale threads at times. I'd suggest Rebar but the price is higher than the ones I suggested. If you are already carrying a SAK then the compliment of tools of it plus the basic tool set of a MT would be great.
-
MP400 would be a good choice and pairs well with a SAK.
Fuse would too if you can get one.
SOG PPP (put in it whatever tools you like)... or you could track down a Wenger Pocket Grip >:D
-
Inexpensive and new, I'd say Wingman/Sidekick (and presumably Rev). I would NOT recommend any if you're doing a lot of hard wire cutting. They'll cut, but require a LOT of force to do the job (this probably doesn't apply to the Rev).
Although, if the tool is still on sale, you could also check Amazon for a Gerber MP400.
Inexpensive used... PSTs can usually be found pretty darn cheap, as can Gerber MP600s.
If you are patient, and keep looking, sometimes you can get a Wave at about $40.
You might also find a Rebar that someone has taken the replaceable cutter head from, and swapped on the older plier head. These can be cheap, and if you're not doing a lot of hard wire cutting can be an excellent deal.
If you can get a SOG Pocket Power Plier for cheap, particularly the older model, it's a good tool.
A has been mentioned before the Fuse, but add that whole line of zytel lined tools.
If you look around your local pawn shops, you can probably find a good used Leatherman under $20 if you don't want to hunt through ebay.
-
@parman53 said:
Thanks for the replys. I was thinking some model of LM just because that's what most people think of when you say multi tool. I noticed no one mentioned any Swiss tools. I'll look on that site for some of the ones mentioned (rebar).The Victorinox Spirit is a great tool, but you'll find out rather quickly that it's on the expensive side. Good bang for the buck, but we're all trying to keep it on the inexpensive side. The Rebar is a Leatherman.
-
leatherman crater c33t/tx, pair of needle nose and pair of lineman pliers for cutting duty.
-
SOG paratool. Cheap, small, and cuts wire like crazy.
-
There's less expensive MT's and MT's that cost a lot more but I think the Rebar is Leatherman's best bang for the buck.
-
-
The best value I've found for the money is the LM Rebar and the Gerber MP600. Both, excellent with a great selection of tools

-
If pliers and a couple of screw drivers are all you need (besides the knife blade, of course) take a look at the LM Skeletool. However, I have found a saw blade quite handy at times when puttering in the yard, so the Sidekick, which has a saw, might be the better choice.
-
Depends on your SAK- if you carry a SuperTinker, buy a good pair of pliers. :) Multis are social tools, they like to have friends and work in teams. Huntsman partners very well with the PST, Climber and Compact with a Supertool of any generation or a Rebar. If you're cutting heavier wire, the dedicated pliers is a good bet though, a multitool can do a lot, but sometimes you need real dikes or linesmans pliers.
-
I think the Rebar would be a good option for you. Or a Gerber MP600. Both are good tough tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login