MUT
-
I vote send it back.
@Tooltime said:
So I sent Leatherman an email about the clip and here is the response I received:Thank you for contacting Leatherman Tool Group, Inc.
In February (possibly early March) we made a running change to the Mut pocket clips, and now make them from 420HC steel instead of the Titanium.
The reason for the change was due to the costs of the Titanium used for it were rising substantially.
Best Regards,
Cameron Hansing
Customer Service
Leatherman Tool Group, Inc.
Leatherman / LED LENSERI don't think they passed any cost savings on to the consumer.
-
And the value of the original MUT with the Ti clip has just gone up... ;)
Sorry but that stamped-steel clip sitting on top of the PVC base is a poor excuse for replacement of the original.
If you're not keen to send it back at least make sure you pick one of the $12 original MUT Ti clips from ebay or elsewhere while still available.
Cheers.
-
Aww hell.
If they replace my MUT with that, I'mma be having words.
Are their any other known changes? (yes, I know there is a MUT variation thread. I'll go there in a moment, calm down)
I hope they just repair the one I sent in.
-
@Sea Monster said:
Aww hell.If they replace my MUT with that, I'mma be having words.
Are their any other known changes? (yes, I know there is a MUT variation thread. I'll go there in a moment, calm down)
I hope they just repair the one I sent in.
I wouldn't worry if I were you. Repair of a MT is one thing, unnecessary replacing its clip with a substandard one is another. Your MUT should come back with the same clip. Unless they decide the tool is a write-off for some reason and they decide to replace it outright.
The only changes I know of are new pliers head with coarse teeth and the stamped steel clip. The Surge screw shown in this thread should be an anomaly. It doesn't belong to MUT, neither by its size nor design.
-
Ideally I won't have to send it in again :-\
-
I got it back today (Longest wait I've ever had on LM Warranty)
and....They didn't replace the parts like I had hoped/asked - just got a NIB replacement - with the new clip.
The head seems broader/different too? I'm not sure, I've been using other tools in the interim, so maybe it's just I've forgotten what it was like.
I'm a bit disappointed, I didn't want the new clip / any other changes they made, and also I'm sure the world would be a better place if they just replaced the bits that needed doing.
The user guide still says Titanium
The handles are stamped 2014.I took it into a store to discuss the "issue" and was met with "Oh, if they had of changed it they would have told us" and "no no, you only have the Regulation (??) MUT, the EOD one has the titanium", along with general shrugging, half hearted "oh interestings" and other non committal jedi mind tricks that retail folk use when they clearly have more interesting things to do that deal with the raving lunatic who wants to talk about 3mm plastic spacers and other inane minute details.
I'm sure a lot of people "prefer" just getting a brand new shiny one.
Anyway, true to previous comments, the new clip seems stiffer than the old one, I could barely get it over my jeans pocket.
Without my original one to compare to, I can't give much useful feedback.
-
@Sea Monster said:
Anyway, true to previous comments, the new clip seems stiffer than the old one, I could barely get it over my jeans pocket.Without my original one to compare to, I can't give much useful feedback.
If the SS clip is too stiff for you, you would not like the Ti clip. The Ti clip is subtaintially thicker and very stiff. But as others have rightfully pointed out, the Ti clip is of higher value and is aestthetically better looking on the MUT. I am still in the look out for a new SS MUT with a Ti clip. Unfortunately, the clip does not show with the tool in sealed package.
-
If the SS clip is too stiff for you, you would not like the Ti clip. The Ti clip is subtaintially thicker and very stiff. But as others have rightfully pointed out, the Ti clip is of higher value and is aestthetically better looking on the MUT. I am still in the look out for a new SS MUT with a Ti clip. Unfortunately, the clip does not show with the tool in sealed package.
I had less trouble with the TI clip,
I'm not in a position to put a tension guage on them at this point.
There could be other design factors, such as the TI one having a larger smoother "contact" point on the clip end, and the steel one only having the thin web...I'm just spitballing at this point, it is early here.
The handle-lock is also much looser on the new one (could be individual variation) - my older one locked in hard, and you had to want to unlock it, the new one kinda just sits there with the barest interference, it doesn't "fall" unlocked, but it doesn't take much.
-
@ ventrix , Sorry to hear about the MUT issues. It would have been great for LM to let us know about the clip changes but you know how it goes. Also I was thinking that since the tool came from fleabay its quite possible that the tool was fooled with. I'm certainly not saying LM hasn't had royal flubs. It is possible that the prior owner made some "adjustments"
.In any case LM will certainly sort this out tho I imagine being in Europe makes the process a PITA.
-
@Sea Monster said:
Without my original one to compare to, I can't give much useful feedback.If you are in Sydney or surrounds, I will happily meet you and bring my MUT's with to compare with. When my BO got replaced with a SS one (No BO stock in Sydney a month ago???) it had the new clip. Unlike yours mine had a crack in the pliers chassis and could not be repaired. I find that if you see them in person (the Sydney guys) they usually repair if asked nicely.
Cheers,
Pete
-
Just to keep this thread alive for few more days ;-)
When our entrepreneurial Albanian friends take the matter in their own hands...if you can't find it - make one yourself!
Big "A" for effort! 8)



-
Just to keep this thread alive for few more days ;-)
When our entrepreneurial Albanian friends take the matter in their own hands...if you can't find it - make one yourself!
Big "A" for effort! 8)

Sensational, Love It!!!
The level of dedication is mind boggling!
They say some of the best ideas and things in life come out when in despair and in lack of easy options.Late Steve Jobs ones said - "Stay hungry, stay foolish..." 8)
-
Just to keep this thread alive for few more days ;-)
When our entrepreneurial Albanian friends take the matter in their own hands...if you can't find it - make one yourself!
Big "A" for effort! 8)

Sensational, Love It!!!
The level of dedication is mind boggling!
They say some of the best ideas and things in life come out when in despair and in lack of easy options.Late Steve Jobs ones said - "Stay hungry, stay foolish..." 8)
I like it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login