Very Exciting Find
-
I recently got this knife, I had seen some examples of similar badges with different scale material with crude stainless tools, I think mine is older because the tools are carbon steel. The tang stamp is Wenger & CIE which I'm finding to be pre 1900. Sorry for the crummy cell phone pictures and MS paint arrangement. Not sure if I should clean this baby up or not, it has remarkable snap and fit for its age.
Enjoy

-
Wow. Just. Wow
Sent from my outdated communication device using an obsolete application
-
Great find :ahhh
I think cleaning it would be the way to go, I don't think it would make the knife less valuable but rather the opposite.
Then again I know very little about collecting these things. Hopefully other, more knowledgeable members will chime in.
-
How did you find one of those in Massachusetts?
Sent from my outdated communication device using an obsolete application
-
@tjfarrington2000 said:
How did you find one of those in Massachusetts?Sent from my outdated communication device using an obsolete application
Interwebs, came from TX
-
Thats
early alox ;) -
If was my SAK I would clean it up and carry it on special occasions. Pulling a 115 yr old SAK out of my pocket would be a great conversation starter.
-
Is this something to be cleaned? I'm not really sure I'm super new to this stuff
-
@PileDriver02128 said:
Is this something to be cleaned? I'm not really sure I'm super new to this stuffFrom Google I got the general idea that light cleaning is OK but don't remove any material so no polishing or buffing or anything. Just a rinse with a toothbrush or something. Someone said the older an antique is the more you want to leave it in original condition but since it's metal it should be good to rinse off. Dry very well. Maybe some oil? Someone here should know what to do.
I personally would just blow it off with my air compressor. Then put it in a glass box and make a little info plaque for it. Then I'd build a stool for it and put it in the corner with fancy rope blocking it off and a spotlight shining down on it. Haha :)
-
Outstanding find.
As to cleaning
I don't know what I'd do. I'd probably just lightly "clean" the tools to remove dirt/gunk but not the patina. The scales I do the same tho I'd use soap and water which I cannot imagine would hurt. I'd dry and use mineral oil on the pivots and back springs and call it good.This is jus my opinion certainly there are far more knowledgeable members to guide you. Lastly I'd make or find a sheath to carry this in so those scale don't suffer anymore wear.
Congrats.
-
Gorgeous!
-
That is really cool. tom.

-
If it is rare and valuable I don't think it should be cleaned. They like rare old stuff left original.
-
Awesome! :ahhh
-
Wow only just seen this - What a beauty - Congrats
I would definitely be cleaning this
As others have said water and some detergent to start off wth
Then lots of oil and a gentle wire wool on the toolsIt will look great
Did you end up cleaning it?
Please post pics if so! -
Missed this thread the first time around. Holy cow is that pretty!
-
First of all--Wow! What a great find! It still being in useable condition after a century just goes to show the excellent Swiss craftsmanship. I'm surprised that the blades (like many other very old SAKs) aren't sharpened down to almost nothing. Interesting the old Wenger logo very closely resembles the current Victorinox.
Cleaning an at least 100 year old Wenger is a whole heck of a lot different than cleaning lets say a 50 year old Imperial Stockman (the worst I've sucessfully cleaned so far, I have a really rusty WWII Ka-bar style fighting knife needing a complete redo). There aren't too many of those really old Wengers left, and what is left is very valuable. The Imperial can easily be found in any condition for less than ten bucks.
I say leave it as is. A light cleaning with soap and water followed by the normal lubrication is all it needs.
-
I'm no expert on antique knife collecting, but in many other antique areas cleaning an old item like that greatly diminishes the value if any of the original parts are even slightly altered. I'd probably do as others have said and just give it a very light once over, then coat it in some of that museum oil and put it behind glass.
At any rate, fantastic find

-
Great find! Congratulations!

Somewhere in this thread somebody mentioned carrying this...
I probably wouldn't...too cool and valuable...this is glass box material! 
-
It might be too late but...
I would clean it with a tooth brush and WD40 then polish the scales with
something gentle like wax on a soft clothPersonally I would then sharpen and carry it
<a href="http://s112.photobucket.com/user/sparky_415/media/2015/DSC02910.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2015/DSC02910.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

