Swiza D03
-
-
Nice photos and review!
Looking forward to read what you think of it after some use.
-
No 1 mod for the corkscrew, on any SAK :D

It works..


unlike the pin.. maybe the hole is for a nail ???
it just falls out

-
Just a thought....
That "pin" area. Could you put a split ring through that for attaching a lanyard? I don't think there's an alternate attachment point is there?
-
Vic screwdriver on a Swiza?
SAKrilege!!!!!
:D
-
possibly, but the corkscrew may not close properly if you do that.
I am sure there is a reason for the hole. I have not really researched it.on a different note it feels like a GEC bullnose - I thought I was picking the swiza, in the dark, and 1 hour later when I checked, I saw that I actually had the bullnose in my pocket.
sakguy, get the torches and pitchforks
-
:D


-
a victorinox blade will scratch a swiza blade, according to my accidental testing.... :)
So far I like it. It feels "right".
-
I have a D04. The red is more of an orange. It is nice and bright, should be hard to loose. So far I like it. I do wish it had a lanyard attachment point.
-
So I used it to help me install some Ethernet sockets, cut some plastic etc.


Here is a comparison picture with some Red Nylon/Celidor/Alox SAKs and a couple of orange knives too, to better get an idea of the red used.
Not as bright red as wenger and Victorinox, but definitely red.
and to get an idea of the blade size

-
I noticed a number on the base of the blade..
I think they may be serialised. Nice :D
-
So,now we need to collect special serial numbers- Birthdays, anniversaries, year...

-
its all planned..... :D
-
Hm... I wonder more and more about their hardening process. They publish higher HRC and more carbon than Vic, but the SAK scratches the Swiza?
-
Maybe they forgot to do that bit..... noobs ::)

:P
-
I used the pruner to open the swiza package, and touched, with little force, the side of the swiza's blade. The finish of the blade got a tiny scratch. Now, we are talking about the sharp tip of the pruner marking the blade's finish.
I have been using the swiza today to open clam shells and cutting plastic and I can not figure out where that original scratch was... The swiza blade is less shiny than a victorinox blade to begin with and the finish looks less tough. That does not mean the blade under is soft.the small screwdriver was also used today (along with the larger one) and is fine.
again, the finish on the can opener/small screwdriver is not as good as on the victorinox-there is some burr on the edge/tip
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




