Machine vs Manual sharppering
-
As a young boy I can remember my father sitting at the kitchen table with his pocket knife, a can of honing oil and an Arkansas stone, back and forth, back and forth, turning the stone over for the dry side... on and on.
What have I used - started with the Arkansas stone route , but never could maintain a perfect angle to get a good sharp edge. Then off to a Lansky sharpening system, but that was a pain with clamps ant flimsy rods.
Next down the pike was the ceramic "X" rods in a block of wood - and they kept a good edge without the hassle.
Last couple years was the Spyderco Triangle Sharpmaker - now that’s a fun and easy system to use and the instructional DVD is very informative, I also started using Paper wheels - more of an industrial approach to sharpening - very effective and works as advertised.
Now the screams - A couple weeks ago I picked up a Chef's Choice Professional Knife Sharpener #320 and like most people think at this point - it's one of those metal removing grinders like the kind on the back side of electric can openers - the man has lost his mind.. Well after sharpening all mine as well as the neighborhood's knives, I'm convinced the Model 320 is a realistic approach to knife sharpening. Paying $45.00 for a used one at the flea market was one of the best buys I've made in a long time.
This professional, two stage Diamond Hone electric knife sharpener incorporates conical 100% diamond coated disks in Stage 1 and a revolutionary stropping/polishing disk in Stage 2, to create, in just seconds, an edge of unprecedented sharpness and durability on fine edge (straight edge) and serrated knives. Enjoy this new stropping/polishing technology that resharpens with less metal removal than conventional means, even less than sharpening steels. High precision angle guides eliminate all guesswork. Model 320 FAQ
-
What grit are used in the stages and what angle does it sharpen at?
-
As a matter of fact, there was a (not multi-) tool site somewhere on the web and they recommended that sharpener as an alternative for those who could not maintain a consistent angle.
I have NO luck sharpening, partially because I don't practice. I may check one of those sharpeners out.
-
I am actually having some measure of success with manual sharpening but it never hurts to look at modern technology for speed and consistancy(aka lazyness)
-
Is this the machine sharpener to get for SAKs and MTs? I am looking for something that's faster and quicker than my Lansky.
Because, there has to be a machine that can do a simple task like sharpening. I mean, these tools leave the factories having been sharpened on machines.
-
What if you lose electricity?
:D -
@Corrugated said:
What if you lose electricity?
:DUsually I just stay home with flashlights or just take a nap.
For others, a power failure seems to make them think it's okay to hit the streets and spur some kind of crime wave, robbing and pillaging their neighborhoods.
Some day I really ought to convince the wife to let me purchase firearms for the home.
-
My mindset prefers learning methods that do not require relying upon electricity. Never know, but in this day and age there are a number of disasters that could result in no juice for quite some time.
-
I have looked and they are actually not as expensive as I thought over here.
Has it worked well on smaller blades as well?
-
I will NOT let a sharpening machine touch my knives. I was at a gun show once and had a moment of weakness. I gave a knife sharpening guy my Tinker and he proceeded to take off probably 10 years worth of metal in under a minute. Even my wife noticed it. I didn't do anything to him because I probably would have gotten arrested. I just walked away so mad that I was shaking. Thank God that I didn't have him sharpen an expensive knife like my Spydie. That's the 1st and last time a machine will touch my knife.
You may believe differently but to me there's too much chance of error. If you mess up and make a bad swipe when you're manually sharpening it's no big deal. OTOH, Just one mistake with a machine can ruin your knife.
But this is just my 2 cents worth. Take it as it is.
-
I think Spyderco's Sharpmaker is a pretty easy-to-learn system and can give you quality results with very little practice. Now, I've never owned one but I now have a friend who does and he loves it. I've also read very many positive reviews on the Sharpmaker.
After reading Jerry Hossom's "Sharpening My Way" post(s) over at Knifeforums http://tinyurl.com/293nmo I wanted to try the belt sander for sharpening. I picked up a belt sander from Harbor Freight for like $40 and some different belts and buffing compound from Lee Valley Tools. Then I didn't do anything for days because I was rereading everything about this method of sharpening. I first tried sharpening some old knives I had in my garage. Within a very short time I got pretty good results. I must have sharpened about 20 old beat-up knives I had laying around in the garage. Then when I felt comfortable enough I sharpened my good knives. Now that I've done it many times I'm getting shaving-sharp edges. I always wanted to learn to sharpen via stones just to say I can do it, but this way works for me and gives me quality edges quickly.
-
eodtech can I send you my Sebenza for you to sharpen in your new fandangled machine ? :ahhh :ahhh :ahhh :ahhh :ahhh Then I woke up covered in sweat and realised it was all a bad dream :D
I don't think I'd even bother to try it as my Sharpmaker gives me the results I want .
Dunc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login