DIY wave pocket clip
-
With Christmas coming up, it's time to make some more pocket space ;). I have a belt sheath I made a while back, but it is bulky and requires me to wear a belt, so I usually carry my wave in my pocket. I've had my eye on a pocket clip for a while, but in Australia they are a bit pricy for a bent piece of metal, at $15-20, so I made my own.
I started by downloading the 2d template from here https://www.tinkercad.com/things/iiwpXMmpfpf-leatherman-lanyard-ring-v01, and then printing and cutting it out, to get the shape for the attachment. I used a dremel cut-off wheel to get the rough shape from a broken saw blade, and after a lot of trouble with files on the hard metal, I got a bench grinder going to shape out the rest of the clip.


It's not perfect, there's a bit of a wobble and I had to modify the attachment so that the file could open when the clip is on. I will probably also round out the top corners which are a bit sharp. However, it fits nicely, has good spring to it and is smooth and wide so hopefully it won't start to "burrow".
I'd say it's a good option to have a go at making, if you don't want to spend anything, and you may learn a thing or two. If anyone wants to make their own I'll be happy to help.

-
Looks good. I think with a little tweaking you'll get it snug. Definitely smooth out those sharp edges.
-
Nice mod! A little grinding here and there and you will have it spot on.
-
Amazing work!! :o
That looks even nicer than LM's clip

-
Nice. I've only used the saws to make pocketclips so far.
-
Great job.
-
Any updates??
Sent from my Nexus 6 using Tapatalk
-
A month or so ago I found a proper lm clip on the cheap, so I ordered it. Since I made the clip it has become slightly discoloured with minor rust. I prefer the lm brand clip because it clips into the notch more securely, since that was the most fiddly part to make of my clip. The lm clip is much more polished and I don't think it will rust at all, and the edges are much smoother and more rounded making it easier to hold when using the tools.
Tips for anyone who wants to do this project is: Take your time with the notch that locks into the wave. That is the most important part of the clip, and the better you get it the better it will fit. Round the edges with a grinder, and test fit it to see if there are any uncomfortable spots when using the tools. Then if you are using a steel that might rust like that from a saw blade, paint it with some sort of laquer or coating to stop it from getting rust spots.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login