Going Buck Wild.
-
@THE_LONGBOW said:
Once again, toolguy your Buck knife collection is impressive.
The stag rattler 112 is nice, I do not recall seeing one like that before.Rich Neyman the author of "BuckMaster Knives" is a personal friend of mine. His book is very informative, and a thorough history of the BuckMaster. Anyone interested in the BuckMaster should own this book.
This is the BuckMaster knife Rich gave me as a gift.LB that's so very cool! Congratulations.
With Rich's book I'm able to determine that your BuckMaster is variation #4 that was produced 1986,which is the first year that Buck initiated a yearly date code and the second year of production for the BuckMaster.
I was up late last night reading to page 120 with only 232 pages to go.With this extraordinarily well documented book I now feel confident that I will be able to make an informed purchase.
If you have the opportunity,please tell Rich that I thank him for writing such a wonderful book.
-
Here is something that just arrived in the mail.
What is it ?
Hint,it's a Buck but it's not a knife !
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
I would have never guessed that
. -
[quote author=Aloha007 link=topic=63570.msg1247817#msg1247817 date=1459380882]
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
I would have never guessed that
.
[/quote]I own steels by Schrade and Gerber but that's the first Buck Steel I've seen!!!

-
I just viewed a Schrade steel on ebay just a few minutes ago.
I also was able to buy a Buck HoneMaster which will be here soon.
Now back to knives.This is my smallest Buck so far.The seller did provide great pictures and I was able to make several determinations.This Buck was brand new and it's date code indicated that it was made in 1986.It came complete with paperwork and box.Another 30 year old knife that was NIB,hoorah.
This is a Colt model #703 which is a three blade stockman design.
-
[quote author=Aloha007 link=topic=63570.msg1247817#msg1247817 date=1459380882]
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
I would have never guessed that
.
[/quote]I must confess that I googled Buck 137 ;)
-
[quote author=toolguy link=topic=63570.msg1247835#msg1247835 date=1459384866]
[quote author=Aloha007 link=topic=63570.msg1247817#msg1247817 date=1459380882]
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
I would have never guessed that
.
[/quote]I must confess that I googled Buck 137 ;)
[/quote]LOL.
-
Here is another sharpening device marketed by Buck.This is the HoneMaster #136 and it's very cool.This is not the first device of its kind but since it was sold by Buck I'll include it in this GBW thread.LOL.
-
Here is one of two more Stag/Damascus 110 Hunters that I received recently.
-
Toolguy
I remember that clamp on device
It was a fixture to keep the sharpening angle constant, if I recall correctly
It that product still offered by Buck ?
Keep 'em coming Bro
-
@Marcellus said:
Toolguy
I remember that clamp on device
It was a fixture to keep the sharpening angle constant, if I recall correctly
It that product still offered by Buck ?
Keep 'em coming BroThat's correct Marcellus.Unfortunately it isn't offered any longer but they appear on ebay occasionally.Here are four for sale now.
http://www.ebay.com/sch/i.html?_odkw=buck+112+knife&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xbuck+136+honemaster.TRS0&_nkw=buck+136+honemaster&_sacat=0I bought this one in my post for $20.00 on the bay.
-
Does anyone know how old this 301 is? I've read that the dating chart widely available online only applies to some and not all models? Is this a 1964-1972? Is it older than that because of the reverse tang stamps of "Buck"?
/Edit: I'm thinking its actually a 303 from ~1967


-
67 to 71 if it's a 301
67 to 72 if it's a 303
My estimate at this point
Master blade on the 303 is about 2 1/4 inches long ( exclude the tang)
301 is longerYou may have one of earlier knives that were made by Schrade under contract for Buck
Can you detect any pivot pin in either bolster ? That would help narrow it downUntil Buck started the date symbol in 1986 it is tricky to date this "300" series of knives
-
@Marcellus said:
67 to 71 if it's a 30167 to 72 if it's a 303
My estimate at this point
Master blade on the 303 is about 2 1/4 inches long ( exclude the tang)
301 is longerYou may have one of earlier knives that were made by Schrade under contract for Buck
Can you detect any pivot pin in either bolster ? That would help narrow it downUntil Buck started the date symbol in 1986 it is tricky to date this "300" series of knives
No pin on the bolsters, the "unrepairable" shrade contract. It's definitely a 303.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
