Swissbuck backspring issues
-
I had a Swissbuck Trekker I got in the cub scouts in the early 90's. I found it at my folks house while home for the holidays and oh the memories it brought back. I grew up in one of the better scout troops and that little knife and I went on outings all over the country.
When I left home for college I was carrying a locking folder by that time and apparently stashed the Swissbuck in a drawer to be forgotten.
My issue is the backspring for the two blades is very weak, practically non existent. It does not appear broken, but the blades have no snap at all anymore. I cleaned it up really well and oiled it up and it didn't help. Seems odd to me as I don't recall it being weak when I died it last and sitting in a drawer for 15 years folded up should not wear the springs.
Buck nor Wenger is going to be any help so is there is any DIY fix anyone knows of to tighten this spring up? They were only made a few years and have been discontinued for a long time.
For nostalgia sake I would love to get this little knife useable again.
I seem to recall years ago people saying the Swissbuck knives were known to have weak springs. But I can't remember for sure.
-
Most likely reason isn't that much a weak backspring as is the broken liner holding the spring in place. Take a look at the back of your knife, near the corkscrew pivot point. Is there a small crack in the liner? That will give the pin holding the backspringin place a bit of play causing the backspring to feel week.
Swissbucks should have the same parts as most of the older Wengers, so most of them except the very last batch made. So sourcing the parts needed to fix yours up shouldn't be a problem nor costly. And if you don't feel like trying to do the job yourself, maybe one of our modders will help you out for a modest fee.
-
@enki_ck said:
Most likely reason isn't that much a weak backspring as is the broken liner holding the spring in place. Take a look at the back of your knife, near the corkscrew pivot point. Is there a small crack in the liner? That will give the pin holding the backspringin place a bit of play causing the backspring to feel week.Swissbucks should have the same parts as most of the older Wengers, so most of them except the very last batch made. So sourcing the parts needed to fix yours up shouldn't be a problem nor costly. And if you don't feel like trying to do the job yourself, maybe one of our modders will help you out for a modest fee.
No cracks that I can see, but thanks for the tip. The knife is useable as is, but I may see about getting it a tuneup just because of its nostalgia.
I have bought quite a few used Vics over the years that had lost their snap and a thorough cleaning and oiling freed them right up. I was disappointed that didn't work on this knife.
Thanks again for the advice.
-
I have a few Swiss bucks here torn apart. If you want it rebuilt I can do that. I doubt wenger or Vic would fix it. They would probably just send you a replacement.
-
@tattoosteve99 said:
I have a few Swiss bucks here torn apart. If you want it rebuilt I can do that. I doubt wenger or Vic would fix it. They would probably just send you a replacement.That is a very generous offer. I will save this post and get back to you if I decide to it. It may be worth more than the knife is to me have it back to original condition.
-
These are still available on Ebay for a pretty decent price if you shop around. That way you could keep yours as a keepsake and have one to use.
Just so you know I would not send it to Buck for warranty, they will send you a different replacement like X-Tract or some thing. They do not have parts for SwissBucks. -
Wengers of that time period are notorious for soft backsprings...especially if the blades were fanned out. I sent two locking models in for warranty...they were replaced. Then I started taking them apart and tweaking the springs...done maybe a half dozen of them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login