Enzo Elver kit
-
Picked up an Enzo Elver D2 flat grind kit recently*. Includes a finished blade, machined (but oversize) scales with liners already glued in place, bolts for attaching the scales and a rather nice leather sheath. I chose green linen micarta for the handles. Decided on the flat grind as this is to be a general camping knife, and not a 'bushcraft' blade. Prefer the flat grind for cooking - I've already got a Mora with Scandi grind. Also picked the slightly smaller Elver (85mm blade) over the Trapper (95mm) as I wanted something a little smaller in the hand.
<a href="https://flic.kr/p/C6Vmi4" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1506/23695835333_f1acbd6078_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Keyed the tang and the inside of the liners for gluing. I also sanded the blade end of the handle scales as they're hard to get to once the handles are bonded on.
<a href="https://flic.kr/p/CBc3ih" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1522/24027074970_65c63e2b49_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Only had 5 minute epoxy and it was rather cold in the shed so no pics of the gluing. Here's the knife clamped up for the glue to set.
<a href="https://flic.kr/p/D4j2Tz" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1675/24322668275_47e5bd8442_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Next step is to trim the bolts down nearly flush with the scales, then sand the edges of the handle back to the tang and finish with oil, varnish or similar.
- I was looking for a way to make the relatively low minimum order value from www.brisa.fi. A new knife ought to do it.

- I was looking for a way to make the relatively low minimum order value from www.brisa.fi. A new knife ought to do it.
-
Looking sharp.

-
All very nice H but isn't there something else you should be doing? </topic/63797
-
@magentus said:
And very nice it looks too! Have you drilled the scales to accept a lanyard or will you leave it? I have my eye on an Enzo kit at some point so I'm interested in your impressions (Can you do Frank Spencer?)I decided not to fit a lanyard. There's a hole in the tang for one but I didn't think I'd need one. The kit is very well made and seems incredible value at only €60, including the sheath. Given that the same knife is nearly £100 at Heinnie I think it's remarkably cheap. The knife felt good in the hand, but I won't know what it's really like until I've finished it properly. Got to work out what to coat the handle with once I've finished shaping it. I've got some Danish Oil, but I might just wax it.
-
Finished this up the other night.
<a href="https://flic.kr/p/DckgFz" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1519/24413441755_10388a590a_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/CKd9tU" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1582/24117822850_9741929330_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/Dckga4" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1607/24413439985_c7fd610390_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Decided just to sand the handle and leave it un-waxed/oiled. Went to 800 grit wet and dry and it's lovely and smooth in the hand. Great shape to the handles and the blade's not too big. Lovely sheath too. -
Nice, tidy job there mate

-
Looking excellent mate. Nice job.

-
Excellent job

-
^^^
What the Guys said


-
Excellent work there
. -
Thanks guys. It was surprisingly easy - the scales were very well finished from the factory and didn't need much work. I'd definitely recommend one of these kits as a cheap-ish way of getting an Enzo knife.
-
That came out really nice, great job

-
Great job!

-
You really knocked that one out of the park.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




