Leatherman Bit Set
-
Hi everybody,
On Christmas I received a Wave plus pouch plus Croc plus Bit extender - the set price of 84 Euro was quite OK.
I wondered if I could manage to really use the bit extender and decided: No, because there is no way of carrying any normal bit set around in your trouser pocket where my Wave stays (I dont't like pouches or sheaths to carry on the belt).
Therefore I started to long for Leathermans dedicated bit set and ordered it. Here some info about it.First, the bit set meets the expectations. These are that the bits do their job and really save space. The latter is indeed the case because Leatherman takes standard double-sided bits and grinds them down on two sides until they are ca. 2.95 mm flat. Together with the holder strips they are extremely flat which is better than any normal bitset box whatsoever, which would not fit in a trouser pocket.
The first ist the case, too - with some exceptions. Since a Torx 30 or a 6mm Allen bit is really much thicker than 2.95 mm, Leatherman ground away half of the geometrical profile of the biggest bits. This makes them extremely susceptible to mishandling and reduces their stability, which regards 4 of the double bits which you will have to use with utmost care.Next, I started wondering where and how to organize the two distinct handy plastic strips that come with the bit set and respectively form a sort of holder for 10 bits each. My solution: I took a piece of thin plastic fibre rope, threaded it through the top end openings which seem to be made to this end, made a knot and heated it up with a lighter so that it partially melted and won't open any more. In this way, the two plastic strips with the inserted bits are joined together like with a hinge. If you fold them together the one way, the bits are readily accessible on the outside, if you fold them together the other way round, the inside is protected by the rim of the plastic strip. I inserted the Croc Multitool (which is a sort of simplified Piranha and is not offered separately but is available only as part of the above-mentioned set with the Wave) at the center and hold everything together with two strong and elastic rubber rings. The overall dimensions correspond roughly to that of the Wave itself but, doubling the space used in the pocket, but the bit set extends the multitool's functionality it in a way that the result is a complete garage toolbox. To protect my smartphone against any scratches, I enveloped the bit set with a baby sock.
Now, the above bit set works also with the Charge which has the same dimensions as the Wave.
Perhaps the next time il will add some photos of my solution. Hope you enjoyed this review - JM -
Welcome to MTO
Nice write up on LMs bit kit. I like how you sandwiched them. Some pics will be nice. -
Hello and welcome from another german user.

for your idea -
Now, as I promised, here some pics of my solution. The bit quality is standard tool steel, really nothing special, but neither scruffy. The point is portability, which is excellent!




-
And here a size comparison:

-
Welcome to the forum JM.

-
Now, after three months, everyday life has begun. Wave + BitSet find their place in one trouser pocket together with a (relatively small) smartphone. This has become a standard equipment which indeed still fits into one trouser pocket. The other pocket contains a Swiss Champ XLT plus a flashlight plus the flat keys plus - as may be the case - the car keys. To be honest, the main difference in usability is the sheath in which the Leatherman stays. Since the XLT has none (no phone being in need of protection), it is simply faster at hand. Such a little thing may make the difference although the big blades of the Leatherman are more performant (whereas the other "double" functions are resolved better on the SAK). Maybe I'm an addict and need help. Anyway, enjoy the above photos. Yours, JM-Toolfan.
-
Here some more notes about the Bit Set.
Since it is designed for use with the Waves's/Charge's built-in bit holder, you might wonder how a Wave/Charge works as a handle for bits. Now, actually the shape of the opened Wave is quite handy. It acts as a good and ergonomic lever for the bits and can transmit considerable force. The limit is when the bits start slipping because it is difficult to press them against the screw due to the oblique angle the knife assumes when it is fully opened. The knife, acting as handle, does not allow easily to exert axial thust on the bit due to its angled shape.
Even the biggest bits (which are half ground away, please see the reviwe on top) find a surprisingly good grip in, say, big Allen screwheads. If you keep the center axis of the bit carefully aligned with the screw axis, you can force the screw astonishingly.
The only disadvantage in handling of the system composed of Wave/Charge as a handle plus a bit as the tool (actually any bit, also the standard included bit, not only those of the dedicated Bit Set this review is about) is that it is incredibly nasty when you need to turn a screw several times. The knife simply is not in first line a bit holder handle and it is complicated to turn it continuously in the hand because it is anything else than cylindrical. You need to re-grip the knife two times per any screw revolution. This is really nasty, whereas tightening a screw which is loose (where you need to turn the system only by a quarter revolution) is really a pleasure, say for re-tightening furniture screws any now and then, also exerting considerable torque. Both knife and bits are up to this task.
-
Welcome to the forum! I do something similar, minus the tool you have in the middle.. I find it fits perfectly in my watch pocket

Sent from my iPhone using Tapatalk
-
I do carry the leatherman clipped to my belt though, i just dont like how bulky the sheath is with everything in it
Sent from my iPhone using Tapatalk
-
@JM_Toolfan said:
The only disadvantage in handling of the system composed of Wave/Charge as a handle plus a bit as the tool (actually any bit, also the standard included bit, not only those of the dedicated Bit Set this review is about) is that it is incredibly nasty when you need to turn a screw several times. The knife simply is not in first line a bit holder handle and it is complicated to turn it continuously in the hand because it is anything else than cylindrical. You need to re-grip the knife two times per any screw revolution. This is really nasty, whereas tightening a screw which is loose (where you need to turn the system only by a quarter revolution) is really a pleasure, say for re-tightening furniture screws any now and then, also exerting considerable torque. Both knife and bits are up to this task.Try this: use you bit extender.. Hold it with your left hand, keeping your bit on target and balancing the tool.. Use your right hand on the back end of your tool.. This way you can readjust for the next rotation quicker.
Like so..
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login