Crunch hi-torque bit driver
-
I've had a couple of occasions where I can't get enough torque to undo fasteners with my Crunch when using a 1/4" square drive adaptor and 12mm socket.
A 90 degree pull is what's needed, I looked at opening the Crunch and using the jaw linkages to provide the torque, but it was obvious that the Crunch would be mortally wounded by such abuse.
I saw a video that showed a Kershaw (A100 I think?) with an optional bit driver that clamps in the jaws, so I thought that's what I needed.
An old bit driver adaptor was sacrificed and welded to a tab of stainless. The thickness of the socket driver fits into the curved jaws of the crunch and gives superb grip.
Easy to make and very useful.


-
Looking good! How do you carry it?
-
@NKlamerus said:
Looking good! How do you carry it?I have a little pouch I bought at Chicago Airport years ago, it's a Brookstone "extra pocket" and it has a strong pocket clip on it.
Very useful, I carry:
The hi-torque driver adaptor
8,10,12mm sockets and 1/4" square drive adaptor
Hex driver extension
Pozidrive 0,1,2,3
Philips 0,1,2,3
Straight 2,4,6,8mm
Hex 2,3,4,5,5.5,6,8mmI like to be prepared :D
-
That is just plain bad ass! Nice work!
That's us mobile
-
@ducttapetech said:
That is just plain bad ass! Nice work!That's us mobile
^^^ this
-
*Good going on the mod, Biker_Bob. I did a mod years back to accomplish a similar-ish goal. A 90 degree adapter for use with any standard bit driver/extender. I didn't make it specifically for the Crunch, though I have used it with it many times over the years. Looking back, I don't how I've gotten by without it. Since I always have a long bit extender on hand, when it is used with the Crunch, I can use the extender for driving and reach into very deep recesses. Used as a handle, it is longer than just about any mutiltool so it has got some decent leverage. I thought I had posted on it years ago. In searching the archives, I realize that it is one of many mods that slipped through the cracks and never got posted. Keep up the good work.....
~ evil ~*
-
@Biker_Bob said:
I've had a couple of occasions where I can't get enough torque to undo fasteners with my Crunch when using a 1/4" square drive adaptor and 12mm socket.
A 90 degree pull is what's needed, I looked at opening the Crunch and using the jaw linkages to provide the torque, but it was obvious that the Crunch would be mortally wounded by such abuse.
I saw a video that showed a Kershaw (A100 I think?) with an optional bit driver that clamps in the jaws, so I thought that's what I needed.
An old bit driver adaptor was sacrificed and welded to a tab of stainless. The thickness of the socket driver fits into the curved jaws of the crunch and gives superb grip.
Easy to make and very useful.Excellent Work, I bet that does come in handy, I know I could use it.
Sent from my SPH-L720 using Tapatalk
-
@evil510 said:
*Good going on the mod, Biker_Bob. I did a mod years back to accomplish a similar-ish goal. A 90 degree adapter for use with any standard bit driver/extender. I didn't make it specifically for the Crunch, though I have used it with it many times over the years. Looking back, I don't how I've gotten by without it. Since I always have a long bit extender on hand, when it is used with the Crunch, I can use the extender for driving and reach into very deep recesses. Used as a handle, it is longer than just about any mutiltool so it has got some decent leverage. I thought I had posted on it years ago. In searching the archives, I realize that it is one of many mods that slipped through the cracks and never got posted. Keep up the good work.....~ evil ~*
I started off trying to do the same thing, but I couldn't bend a standard bit driver (no oxy acetylene) and my welding isn't good enough to join a bit driver at 90 deg. So this was the quickest and dirtiest way of doing it!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
