Wruw :)
-
@twiliter said:
Thanks again for the reply John, I am learning a lot!
Thanks for your service also.

I think I like Vic watches because of the reputation and brand, and I think they capitalize on that, and rightly so. I'm not too keen on the Shinola brand, I think they are making more of the name recognition than it deserves. They might be fine watches, but nothing that jumps out at me enough to consider buying one. I'm sure it's hard to navigate all the different boutique brands and the different merits of each, but I do see some that have interesting histories or a reputation for quality, or both. The movements and manufactures, and history behind them is fascinating, and I'm sure I'll be wanting a mechanical watch at some point, so all the good info from your posts and other research I'm able to do will help a lot. I do have some criteria though if I ever get another one. It will have to be very readable, very comfortable (and hypoallergenic), and not overpriced for what it is. I really appreciate Swiss quality, and I think the reputation is well deserved, but by the same token I see there are a lot of luxury watches that are really absurdly priced for no logical reason. I'm more about quality and functionality than hype or trying to outdo my golfing buddies (not that there's anything wrong with that, it's just not what I'm in to), so a high quality, good looking, wearable, relatively simple, functional watch is what makes the most sense to me. There is probably an automatic in my future, and I want to be as happy with it as I am with my quartz INOX. :)
btw, the crystal on my watch is so flat, the reflection it casts at 20 feet is about the same size as the crystal itself, which I find pretty amazing! A small adjustment is all it takes to keep it from blinding me, but I'm sure it would be a problem for any covert/camo operations, someone would probably have to put some mud on it or something. ;)
Thanks . . . I consider my service to have been a real privilege. Had a scholarship that paid for my undergrad degree. The payback turned into 21 years. Some once in a lifetime experiences, a few of which I was very glad were only once in my lifetime, but it came with the territory and I knew that up front with eyes wide open.
This is how we dealt with problem watches although it was a PITA and the Velcro was a potential noise problem. I had a different watch on it for a couple years (a Seiko), stashed it in a box when I quit using the Seiko, and then put this dirt cheap early 1970's "Chalet" on it a few years ago to show someone how we used it (bought at Kmart circa 1972). The Chalet exceeds the definition of a "beater" watch! I wore it when I was doing underground hard rock mineral mining in a life prior to the military (copper mining in central Arizona). Made enormous amounts of money to help pay for my undergrad degree which was mostly funded by a scholarship from Uncle Sam, but not completely. Much, much, much different from coal mining (you'd never, ever get me into a coal mine).
Rather amazing that they still make these, or at least they did a few years ago! Has a flap you can cover the watch with.

This is with the watch covered . . .

Or you could flip the cover around and wear it open . . .

Closed up on my wrist . . .

This is the Seiko I used it with . . . the one with the dead flat mirror-like crystal . . . put the steel bracelet back on it when I replaced it with the Hamiltons.

Back to the Swiss Made Chalet "beater" watch . . . this is what the movement in it looks like . . . IIRC 1 jewel. You don't get much cheaper than this with die cut sheet metal bridges riveted together! The wheels (gears) are also die cut sheet metal. It's what you got for about $5 USD at Kmart in the early 1970's before there were dirt cheap quartz watches. What's truly amazing is that it still runs with reasonable accuracy - well under 30 seconds gain or loss per day! And to think what I put it through for some years, too!! Don't make 'em like this no more.

And the Swiss Watch Industry would like you to think they only made carefully crafted and painstakingly assembled high precision movements. HA! They pumped out gazillions of these cheapies until the quartz crisis hit.
John
-
@jalind said:
...
Back to the Swiss Made Chalet "beater" watch . . . this is what the movement in it looks like . . . IIRC 1 jewel. You don't get much cheaper than this with die cut sheet metal bridges riveted together! The wheels (gears) are also die cut sheet metal. It's what you got for about $5 USD at Kmart in the early 1970's before there were dirt cheap quartz watches. What's truly amazing is that it still runs with reasonable accuracy - well under 30 seconds gain or loss per day! And to think what I put it through for some years, too!! Don't make 'em like this no more.
And the Swiss Watch Industry would like you to think they only made carefully crafted and painstakingly assembled high precision movements. HA! They pumped out gazillions of these cheapies until the quartz crisis hit.
John
Now that's something to think about.I cannot remember what brand my first watch was I've got as a kid. Mechanical, handwind, just time, acrylic domed glass, and for some unknown reason always ran 30min. slow from 6pm on :D
The second one was a Pulsar digital... and it was eating batteries like the flashlight I had.
Then a simple Casio followed which lasted for years.
-
Bulova Corvara
63B101
2008
ETA 2824-2Part of Bulova's Swiss Made Accutron line prior to their "Accutron" trademark shuffling, the style of this one is all about pinstripes which carry through the dial, case and integrated bracelet. Crystal is slightly curved sapphire with AR coating. Hands are skeleton broadswords and the lume is quite good. Landing between a sports watch and a formal dress watch, without a screw down crown and rated for 100m water resistance, this one can be worn with most anything. It was made about a year or so before Bulova started using Sellita SW200-1 movements instead of the ETA 2824-2.

The prominence of the dial pinstripes depend on light direction as do the skeleton outlines of the hands between their tips and the . . .



Several years ago the Swiss Made "Accutron" line was renamed "Accu-Swiss" when Bulova created the Accutron II Precisionist line of high frequency quartz watches.
John
-
That's a nice looking one John, maybe a little hard to read for my taste, but I like the pinstripes!

-
I love your watch series here John

I'm not fond of the stripes on the dial too much, and the black skeleton hands seem to make it hard to read for me too.
But the outer apparence is nice. The four screws on the case front are actually real too.
And it's driven by a solid and reliable movement I think.
-
Seiko "Ice Monster"
SRP481
24j 4R36A hand-wind & hackThe 4R36 and its family are a significant evolution of the 7S36 movement family. The most noticeable to the end user are the addition of hand-wind and hacking, a long-term complaint about the 7S26/36 movement family and its predecessors. Seiko made other other tweaks based on their development of the 6R15. This new family has been gradually displacing the 7S26/7S36 over the past several years. As I understand it, these are not and cannot be used as a drop-in replacement though. IIRC, the movement height and stem are different. There are some conversion mods being done on older Seiko models, but they aren't completely straightforward.
This may have the appearance of a dive watch, but it really isn't one. It accrued the "Ice Monster" name from its dial and the line of these in various colors are referred to as "Baby Monsters" because of their striking similarity in appearance. They're not much smaller or lighter though. The crown does not screw down and they're rated to 100m which makes them a sports watch. The minimum for a dive watch is 200m and a screw down crown is essential for diving. Typical of Seiko, the 120-click bezel ratchet is extremely smooth.

Dial and hands have the usual impeccable finishing work.

Lume has the typical beacon brightness.

John
-
Beautiful

-

Wearing a G-Shock today
Sent from my SM-G935V using Tapatalk
-
Hamilton Khaki Field Chronograph
H71416147
Valjoux (ETA) 7750These were part of Hamilton's Khaki line about a decade ago ago. Bought it nine years ago and had to do a bit of searching to find this specific model as there were two different sizes with different dial colors, some with stainless steel bracelets and some with leather straps.



John
-
@jalind said:
Hamilton Khaki Field Chronograph
H71416147
Valjoux (ETA) 7750These were part of Hamilton's Khaki line about a decade ago ago. Bought it nine years ago and had to do a bit of searching to find this specific model as there were two different sizes with different dial colors, some with stainless steel bracelets and some with leather straps.



John
Oh oh.... I do like that

I would not change a thing on it John.
How is the illumination of the hands? -
@MTMatt said:
Hamilton Khaki Field Chronograph
H71416147
Valjoux (ETA) 7750These were part of Hamilton's Khaki line about a decade ago ago. Bought it nine years ago and had to do a bit of searching to find this specific model as there were two different sizes with different dial colors, some with stainless steel bracelets and some with leather straps.



John
Oh oh.... I do like that

I would not change a thing on it John.
How is the illumination of the hands?Funny you should ask . . . just happen to have the photo on file . . . index at the 12 partially covered by the tip on the chrono seconds. Only main time is lumed which is OK with me. Using a chrono complication in the dark is all but impossible. Glad I got it when I did . . . before Hamilton (and Tissot) started using a different and lower cost chrono movement that ETA came up with to reduce cost for Hamilton, Tissot and a couple others.

John
-
@MTMatt said:
Hamilton Khaki Field Chronograph
H71416147
Valjoux (ETA) 7750These were part of Hamilton's Khaki line about a decade ago ago. Bought it nine years ago and had to do a bit of searching to find this specific model as there were two different sizes with different dial colors, some with stainless steel bracelets and some with leather straps.



John
Oh oh.... I do like that

I would not change a thing on it John.
How is the illumination of the hands?Funny you should ask . . . just happen to have the photo on file . . . index at the 12 partially covered by the tip on the chrono seconds. Only main time is lumed which is OK with me. Using a chrono complication in the dark is all but impossible.

John
thanks ! Perfect. -
The soft biocompatible underbelly. So wearable.


-
Funny how a lot of the watches not made of stainless steel have stainless backs, the INOX carbon, the G Shocks, Ball TI hydrocarbon, etc. If you are sensitive to stainless (or the nickel in it more specifically), the choices get fewer and fewer. :-\
-
@MTMatt said:
Hamilton Khaki Field Chronograph
H71416147
Valjoux (ETA) 7750These were part of Hamilton's Khaki line about a decade ago ago. Bought it nine years ago and had to do a bit of searching to find this specific model as there were two different sizes with different dial colors, some with stainless steel bracelets and some with leather straps.



John
Oh oh.... I do like that

I would not change a thing on it John.
How is the illumination of the hands?Funny you should ask . . . just happen to have the photo on file . . . index at the 12 partially covered by the tip on the chrono seconds. Only main time is lumed which is OK with me. Using a chrono complication in the dark is all but impossible. Glad I got it when I did . . . before Hamilton (and Tissot) started using a different and lower cost chrono movement that ETA came up with to reduce cost for Hamilton, Tissot and a couple others.

John
That one is super legible!

Making me want a Valjoux 7750, I'll find a titanium one eventually. :)
-
@twiliter said:
Funny how a lot of the watches not made of stainless steel have stainless backs, the INOX carbon, the G Shocks, Ball TI hydrocarbon, etc. If you are sensitive to stainless (or the nickel in it more specifically), the choices get fewer and fewer. :-\Funny you mention that Twiliter.
Had my beach watch on today.G-Shock G-9100 aka Gulfman...



Swapped the bezel to one from another model (ordered just the part).
I didn't like the red G on the original :DThere are nicer looking Gulfmans to get if you're interested. With Tough Solar, Multiband 6...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login