Busted backspring?
-
I have a Wenger knife with a loose main blade, vertically:

When the blade is open it has like maybe 1/8" or 1/10" of vertical play at the tip, but stays open fine. Not the strongest, but you can tap the spine and it won't close on you.
When everything is closed, you can shake the knife and hear a little bit of movement in the main blade, but will never fall out or anything. Seems safe enough.
When the nail file is open though, the main blade becomes very loose and can fall open enough to expose some tip and edge, which is dangerous.
What could cause this? Is the backspring fractured? I can't seem to find any cracks from visually expecting? Can the backspring just lose its springiness? It feels weak, but I can't identify any observable problems with it.
Has anyone encountered this on their slipjoints? Are there any fixes? It is a nice Evo 16 in otherwise solid condition, and I'd hate to retire it over this.
Thanks
-
It could be years of no oil and it is worn out, or the spring just got tired and lost it's spring. I would guess though it is cracked and just hard to see. Send it in for free repair.
-
Does Vic honor the Wenger warranty?
-
I did actually have a Wenger that got a bent spring. So it is likely not cracked, but I agree send it to Vic
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login