Which multi tool do I need?
-
So I got a job with Lowe's driving a truck.
Mostly I drop off lumber and other building materials for contractors but when it is slow I help out with appliance deliveries in the box truck.
The tools we are given to install are junk
when they were new and even worse now.What I am looking for is a multi that can use 1/4 in drive sockets. There are a ton of little bolts we use for power cords and such.
Maybe some kind of adaptor so I could use sockets on one of my Leatherman tool bit adaptors or extensions or the Vic bit wrench thing since I am still looking for an excuse to buy a Spirit.
-
Congrats on your new job

-
@HarleyXJGuy said:
So I got a job with Lowe's driving a truck.Mostly I drop off lumber and other building materials for contractors but when it is slow I help out with appliance deliveries in the box truck.
The tools we are given to install are junk
when they were new and even worse now.What I am looking for is a multi that can use 1/4 in drive sockets. There are a ton of little bolts we use for power cords and such.
Maybe some kind of adaptor so I could use sockets on one of my Leatherman tool bit adaptors or extensions or the Vic bit wrench thing since I am still looking for an excuse to buy a Spirit.
Always said you were a lumbertrucker Harley.
-
Congrats on the job.
Your Surge is capable in using 1/4 sockets. You will have to use the bit extender and it won't drive with incredible torque.
The Crunch has a place in the handle that will accept 1/4" drive.
The PPP Deluxe also has a 1/4" drive.
You can buy the Vic plus set, either the L wrench or ratchet would be bomb proof.
-
All of them.

-
Actually, this came up on another thread a while back: /topic/64887
One good bit of advice from there (or so I thought, anyway) was to have proper tools, not just a multi. You're being paid to install someone's property. I wouldn't be happy if you started mucking about with my brand new washing machine with a pair of folding pliers.
-
Get yourself a small impact driver, ratchet driver, long length bits and some nut setters.
<a href="https://flic.kr/p/eRd4tT" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7441/9089499341_afbb73c9a6_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/FxjFRT" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1684/25952371433_603f60731b_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Congrats on your new job

Thanks.
Might be temporary as I will probably go back to Afghanistan this summer as a security contractor.
Lowe's is way safer but the money is way better.
Harley, did you "retire" from active duty?
-
I would go with the surge but also a small bag of tools
Ratchet screwdriver
Sidecutters
Adjuastable wrenchSent from my SM-G900F using Tapatalk
-
@HarleyXJGuy said:
...I am still looking for an excuse to buy a Spirit.A Spirit plus ratchet set is capable and customizeable (1/4" sockets are handy). I carry that kit a lot in my tool bag, and with a few other things are actually available at Lowe's. In my case a small Crescent wrench, wire cutters, and Channellocks among other things, but that combo has been fairly unstoppable so far.
Congrats Harley, you now must get a Spirit! ;)
-
Congrats on your new job

Thanks.
Might be temporary as I will probably go back to Afghanistan this summer as a security contractor.
Lowe's is way safer but the money is way better.
Harley, did you "retire" from active duty?
I am still in for a couple more months but using up all my saved vacation days. Not a whole lot of time to take leave while in Iraq or Afghanistan.
Maybe I am slow but I do not understand how to use sockets on the female end of a LM extender?
-
Congrats on your new job

Thanks.
Might be temporary as I will probably go back to Afghanistan this summer as a security contractor.
Lowe's is way safer but the money is way better.
Harley, did you "retire" from active duty?
I am still in for a couple more months but using up all my saved vacation days. Not a whole lot of time to take leave while in Iraq or Afghanistan.
Maybe I am slow but I do not understand how to use sockets on the female end of a LM extender?
You can get a little 1/4 drive adapter that fits in there
Sent from my SM-G900F using Tapatalk
-
@Sparkydave said:
You can get a little 1/4 drive adapter that fits in thereExactly - these have a 1/4" hex male on one end and a 1/4" square male on the other end (and you can also get them with a 3/8" square male or a 1/2" square male end as well).
-
Google nut setters.

-
You can get a little 1/4 drive adapter that fits in there
Exactly - these have a 1/4" hex male on one end and a 1/4" square male on the other end (and you can also get them with a 3/8" square male or a 1/2" square male end as well).
Ive got some of the long ones to fit in my impact
Sent from my SM-G900F using Tapatalk
-
Google nut setters.

I have a bad feeling about this...
There is one in the pic I posted above...
-
@HarleyXJGuy said:
I am still looking for an excuse to buy a Spirit.Everyone should own at least one Spirit. Simple as that

-
Do not want to take away an excuse to pickup a Spirit, yet a very practical tool I have at least 4 of in my work truck and fits well in back pocket is a 6n1 screw driver from Husky (p/n 628-375). I find it at HomeDepot for under $6. It has two Phillips PH1 & PH2 tips, two flat blades and two nut drivers that most standard hex heads used by assembly lines
Sent from my iPhone using Tapatalk

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login