Another Tool Letdown
-
Last week I had another problem that should have been pretty easily solved by having a few basic tools handy. I had my EVO Grip S17 and Leatherman Surge- I should be able to handle just about anything, right?
Wrong.
The battery in my work truck needed to be replaced. There was nothing wrong with the old one, but the boss got a new one anyway. Not one to argue, I set about changing it, but for the life of me I could not get the bolt that holds the strap off. It was too awkward to grab side on with the Surge due to the bracket around the bolt and the side of the truck. there was no screw head to try and get with a screwdriver, and trying to get at the bolt with the tips of the Surge's plier head would have just destroyed the Surge. The blunt nosed pliers of something like the SwissGrip might have been more effective, but probably not too likely as I would have been able to grab the bolt but wouldn't have had the room inside the bracket to turn it.
All in all I am thinking that the world needs more blunt nosed, rock solid multitools though. The blunt-needle nose pliers found on many tools have the unfortunate problem of not working good for jobs that need either type.
I'm glad I was at the shop and not halfway between no where and just outside of no where when this happened.
Def
-
Would a Leatherman Crunch worked in your situation?
-
-
The Crunch may have worked- it may be one of the few tools that would have worked but it was annoying that an otherwise simple task couldn't be done by "any" multi.
I eventually ended up using a mechanic to do it not because of the multi problem but because the problem with the truck was worse than a dead battery.
Def
-
Pliers just weren't the correct tool for the job. I carry a $20 Crescent socket set in my truck. It's not SnapOn or MAC but it's good enough for emergency use.


-
Nice! An AutoTool and a socket wrench set; that combination should handle most minor vehicle repairs.
-
I agree that pliers weren't thr ight tool for the job. I also agree that the right tool should be used whenever possible.
I also think that a multi should be able to handle almost all (if not all) relatively simple tasks. If I had been on the road when this problem hit I would like to know that the tools I am carrying will handle simple problems- that's why I carry the tools. Apparently I need to carry more tools. I'm not terribly adverse to that idea, but I doubt a set of sockets would fit on my belt all that well!
Def
-
To address the same issue defender desrcibed, I've gone to carrying an irwin 5wr visegrip. To me it's so much easier having a tool that will grip on to bolts insteads of just slipping. I know it adds weight, but after the amount of times I've used it, I decided it was worth the weight.
-
Would this solve your problem
A bluntnose/needle nose combo a leatherman prototype I found in before there was leatherman chapter 5. Great post j-sews.

-
In those suitations I like to use a BFH!
-
I can't agree more with what supratentorial said. Multitools and SAKs are great when in need, but they really aren't always a substitute for "real" tools, especially when working on vehicles. Please understand this comment from a guy who works on a 40-year old truck regularly (and carries a SAK nearly 24/7). Also, keep in mind--that 40-year old truck is much easier to work on than anything made today.
Also, never underestimate the power and utility of a BFH!

-
tell me more about the Bronco! I had a '70 w/ a powerlock front, detroit rear what a handful! now that was 4 wheel drive, almost broke a wrist or two, sold it about 5yrs back boy do I miss it!
mike -
@SoDak said:
To address the same issue defender desrcibed, I've gone to carrying an irwin 5wr visegrip. To me it's so much easier having a tool that will grip on to bolts insteads of just slipping. I know it adds weight, but after the amount of times I've used it, I decided it was worth the weight.Hey SoDak, I forgot, didn't you also try out the Schrade ST6?


-
I never really gave the st6 a tryout because I mostly bought them for collecting. In additionI prefer the blunt nose and release bar of a regular visegrp and the extra tools weren't really necesarry for me because I already carry a core. Although I did use them once and it wasn't the most favorable. See I was changing the oil on my dakota which has a plastic oil filler cap that won't unscrew if it gets a little warm. Normally I use a regular needlenose visegrip, but since I couldn't find them I figured I'd use one of my st6's. To sum it all up they worked, but they weren't the most pleasant to use. The reason is that when schrade made the handle with the blades in it, they put it a little too close to the opposite handle. That translates into if the pliers slip and close too quickly, you can get pinched. I didn't get bit very bad, but it sure didn't make me want to use the st6 unless I needed to. Really, it's not a bad tool especially at what I paid for mine, but I think it needed a little more refinement which is too bad because I think it could have been an excellent tool.
-
Yep, too bad Schrade went under. They were a great old American knife company.
-
Worse than going under, they were rescued by the anti christ of defunct US cutlers, Taylor Cutlery.
Def
-
I'll betcha old Ebenezer Schrade (or whatever his name was) is rolling over in his grave right now, seeing his name plastered across all those cheap Made-in-China knives and tools. :P
-
Same with Edward Smith and his buddy Jebediah Wesson, Randall Colt, and Edgar Winchester....
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login