Pot Belly fire pit
-
More for keeping warm than cooking, but with the addition of a steel plate or a grill on the top These would be fine for outdoor cooking.
I've been meaning to build one of these for ages but never got around to it. But I recently picked up a brand new set of steel wheels from someone who had mag wheels fitted to their new car. $10 for four wheels sounded like just the kick in the pants I needed to get this project started.In my research (watching youtube ::) ) I've seen a few designs but almost all of them left the wheels intact and consequently looked like a couple of old wheel rims stacked on top of one another. Pretty ugly look really.
Looking at the shape of the rims I realised that by cutting the outer rim off where it joins the hub it made a much nicer contour.
Two of these welded together were shaped like the body of a pot belly stove.
As a happy coincidence, the drop centre diameter of the 18" rims just fits nicely inside the rim diameter of a 13" wheel. Which also means that the cut off outer flange from the 16" wheel fits outside the 13"rim. That makes for quite a nice shaped base dor the body to sit on.Dig out the welder and angle grinder and away we go...
There was one problem with using new rims. These (from a Hyundai) appear to be zinc plated and powder coated. Welding does not like either of those and even with grinding the immediate area the contamination from the adjacent plating/coating cooking off made for some pretty crappy welds. note to self for future; get rims sand blasted or use old junkyard rims with just paint.
After welding the various parts together I cut a door in the body and welded on some hinges.
A quick firing to burn off the powder coating (sorry for the stinky smoke neighbourhood ::) ) and after cooling a quick clean and a coat of 1200 degree satin black stove paint and I think they are looking quite good.



-
That looks amazing! Great work indeed!
If shipping wouldn't be completely insane, I'd send in my order for one immediately!
Def
-
Sweeeeeeeeet
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
We need one of those tonight. Its Freezing cold over here!
-
Great idea using wheels, I've always been a bit wary of cutting into a propane tank :ahhh
-
That is straight up bad ass! Nice work man!

-
Wow, that is a nice couple of heaters.
Is there badge you can request for metal work or such?
Maybe used your Multitool to shape a hinge pin or like.
How long a piece of kindling will it handle , 12 or 15"
Sent from my iPhone using Tapatalk
-

They look great Peter!
-
Looks pretty cool, or rather, HOT! >:D
I'm not following along too well with the 13", 16", 18" rim measurements though...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






You could cut one up in your garage, whats the worse thing that could happen? 