Super Stack challenge attempt
-
@Noa Isumi said:
Day 12 Tuesday
Some of you might be bored at the office so here's a little fun.
The office supply slingshot use your MT as frame, wedge the pliers open with a coin to get a little bit spread on the handles, and wrap a few rubber bands around the tools for your band.
Diffrent rubber bands give diffrent power, large flat ones work the best. I have hit a coworker with an eraser at 60ft+ before. >:DUnfortunately all I had were the weak little bands that aren't verry stretchy, so I doubt it will preform that well.
I
that idea for sure :D Will definitely find me a rubber band for this 
-
Day13 Wednesday
This i what happen when you build racks out of scrap and zip ties.
No, this is not my mess. I just get to "fix" it.
Don't worry the solution is simple; bank line, hose clamps, and more zip ties



-
Day 14 Thursday
Since I just PM'd Grant for one of those MTO hats he's selling, I figure today I will show a couple of my current hats.
I used to always brimed hats like fedor, boonie and drovers. Ball caps used to be something I only wore at work to keep the glare from lights down, and protect my face from flying hardware. Just tipping my head down and buckels, D rings, carabiners would hit the bill instead of me.
Now I wear them all the time
-
Day 15 Friday
Don't know why I thought I could do a project on a Friday. Fridays are always crazy busy.
But since I'm not going to get to it today, I will at least show you what I have planned. Hopefully I'll get to it later tonight and be able to post it tomorrow.
Ehat I'm looking at making here is an astronomical ring ,a simple navigation measurement tool. now normally and by the instructions that I have it's supposed to be made out of steamed wood or brass; I however am using a 4-inch pvc plumbing connector. I'm going to try and do most if not all the work with just the tools seen here. Hopefully I'll be able to get the holes drilled with the all and still having to resort to a power drill.
-
Day 16 Saturday
I got the ring mocked up. I did bore the holes with the awl, and the notches at 0 & 90 deg were cut with the file. Really it is just a matter of layout.
Since this is my first try at one of these I didnt go all out, which may be why it looks like it was made by a 3rd grader. But there is a forgiving nature to the kid approach. And I did set my own ground rule of only using EDC items to make it, which excluding the multi-ruler I stuck to it. I may have to get another one for my pack.The way it works is you hang it freely the ring and align the hole with the sun. This will produce a dot of light on the scale giving you a rough angle reading. Rough it is too. The scale is 10deg intervals and the dot on mine is almost 10deg across. I think I made the hole too big. This may not be an issue on a larger size ring, or with a smaller hole. And obiously my lines aren't as straight as they could be, but I was using a cigarette pack as a square after all.
Edit.
I added a pic of how the book shows it bieng layed out
"Latitude hooks and azimuth rings" by Dennis Fisher



-
Day 17 Sunday
I started a thread featuring this little hobo tool over in the cheap and cheerful section; but I figured I'd use it as a prop for today's photos since I was lacking any other real inspiration today
-
Some cool pics buddy

I
the little fork and may head over and check the other thread out 
-
Not much in that thread at the moment. I've been trying to use it for diffrent things and will be posting more on it there probably late tomorrow.
-
@Noa Isumi said:
Not much in that thread at the moment. I've been trying to use it for diffrent things and will be posting more on it there probably late tomorrow.

-
Day 18 Monday
Look what I found in one of my old toolboxes. Mid 90's Coleman PST (china).
I must have had a dozen of these with diffrent brand stamps from 95-99, dispite the fact I carried a MrPinchy.
-
A few more toys from that same box.
American Camper PST-same as coleman difrent stamp
Eklind Tool no.22461 (folding drivers)-carried this in HS, I was taking trades and it has no blade
That wouldnt fly now...be arrested for even thinking about carrying itGighand Bodyguard (tanto)- Fred Carter licences AUS8, aluminum handles
Have 2 more and a Guardian dagger floating around here somewhere.SCHRADE+ 470T, USA
This needs re-profiled bad, serrations are chewed up and the tip is broken, but it's a USA SchradeAnd I dont think the Shefield Super Knife with a Lowes Husky logo needs introduced

-
I love going through my old stuff like that and finding things I had forgotten that I even had


-
Day 19 Tuesday

-
@Noa Isumi said:
Day 19 Tuesday
-
Day 20 Wednesday
Found somethi something I missed in the bottom of that tool box a pair of Case XX, Bradford scissorJudging from the looks of the of the grind lines on the edge they actually still have their factory edge and they are super sharp after all these years.




-
Day 21 Thursday
A bit of shoe repair. Trim and reglue one of the outer sole layers
-
Great shoe fix
and those scissors are

-
Day 22 Friday
First up is a pic in a tree from a few min ago.And second is a pic with my Cold Steel Recon 1 XL that I put in the edge tool section's Cold Steel thread at 3am this morning
Edit
It helps if I save and load both pics properly


-
New page banana man dance.

-
Don't leave it there too long mate. I found this random key last week.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login