The test.
-
Last for now but maybe the most interesting is the rubber mat. For speed the serated won but the cuts where not as clean as the PE. I did some slicing and push cuts. The chisle grind PE on the solder cut as clean as the PE Trekker but I think the Trekker PE was just a little easier to control. This exercise dulled both blade's but even dull both blade's still sliced through the hard rubber.
So far I can't really say one is better then the other.More to come as I find more stuff to cut.




-
@gene stoner said:
I have heard so much about the debate about Serrated vs non serrated over the years that I decided to do some testing on my own. I went for a walk this morning hoping to find some junk to cut up and this is what I found. Part of a nylon tiedown a thin nylon strap a rubber tiedown and part of a heavy rubber mat. For the test I'll be using a plain edge two handed Trekker and a Soldier knife.

-
Awesome Gene!!!!!

-
AWESOME "TESTING"
8)

I did a similar one once years back ...... the material that was great on testing sharpness,edge geometry , etc.. was Weed Eater string....the thick stuff (orange or lime green) , try push cutting that stuff ( 20 cuts on each ) , it was a great media to actual show me differences.

-
@cali-SAK-attack said:
AWESOME "TESTING"
8)

I did a similar one once years back ...... the material that was great on testing sharpness,edge geometry , etc.. was Weed Eater string....the thick stuff (orange or lime green) , try push cutting that stuff ( 20 cuts on each ) , it was a great media to actual show me differences.

I'll have to look for weed eater line to test. Thanks for the idea.
-
I've read that a serrated edge holds a usable edge much longer.. I'd personally like to see that tested with vic since their serrations are not.. Normal
-
Great test Gene

-
@gdoolittle said:
I've read that a serrated edge holds a usable edge much longer.. I'd personally like to see that tested with vic since their serrations are not.. Normal
I'm actually looking for something to test that theory out with so check back. You never know what I'll find to cut up.
Try cardboard. That dulls blades fast. And easy to see results as it begins to tear.
-
Cool test Gene - thanks for doing it on our behalf. Looking forward to more results......

-
Nice testing, and thanks for sharing!

-
Very interesting Gene. Thanks for doing this.

-
+1

From my limited observations, I'd say the serrated beast is better at hacking or to put it in another way, it works best for tasks where precision is not of paramount importance. Slashing is another thing it does well, which makes sense for a soldier's knife.
I've cut a bunch of fern with it and it worked great. No idea about dulling though, I'm very interested to hear your findings

-
Nice

Looking forward to more tests. Will you also do a sharpening comparison?
-
@Etherealicer said:
Nice
Looking forward to more tests. Will you also do a sharpening comparison?
What type of sharpening comparison did you have in mind? To be honest both blade's are hair shaving sharp when I start a test. (Yes you can shave with the Vic serated blade just be careful.)

-
What I've read is serrated edges don't have to be as sharp as PE to still cut. When the points may dull the scalloped part will retain its edge and still be able to perform.
@gene stoner said:
Last for now but maybe the most interesting is the rubber mat. For speed the serated won but the cuts where not as clean as the PE. I did some slicing and push cuts. The chisle grind PE on the solder cut as clean as the PE Trekker but I think the Trekker PE was just a little easier to control. This exercise dulled both blade's but even dull both blade's still sliced through the hard rubber.
So far I can't really say one is better then the other.I'd be curious to see the tests continued after the edges were noticeably dull. As mentioned the points on the SE may feel dull yet still perform. I'd be interested how long the PE would perform once the edge was feeling dull.
Good job and thank you.

-
Nice

Looking forward to more tests. Will you also do a sharpening comparison?
What type of sharpening comparison did you have in mind? To be honest both blade's are hair shaving sharp when I start a test. (Yes you can shave with the Vic serated blade just be careful.)
It would be interesting what kind of setup you use and how long it takes.
I'm not very good at sharpening, but I can work with PE blades. Serrated blades take me forever.
-
@Aloha007 said:
What I've read is serrated edges don't have to be as sharp as PE to still cut. When the points may dull the scalloped part will retain its edge and still be able to perform.Last for now but maybe the most interesting is the rubber mat. For speed the serated won but the cuts where not as clean as the PE. I did some slicing and push cuts. The chisle grind PE on the solder cut as clean as the PE Trekker but I think the Trekker PE was just a little easier to control. This exercise dulled both blade's but even dull both blade's still sliced through the hard rubber.
So far I can't really say one is better then the other.I'd be curious to see the tests continued after the edges were noticeably dull. As mentioned the points on the SE may feel dull yet still perform. I'd be interested how long the PE would perform once the edge was feeling dull.
Good job and thank you.

This is exactly why steak-knives are serrated. The teeth get blunted quickly, cutting into porcelain, but the knife stays sharp in-between.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login