Alox scales
-
That would require a lot of work to fit; the scales are 2mm longer than the Super Tinker frame, and the tool pivots are a couple millimeters larger, too. There was the Coast knockoffs, though, which were 91mm, if I remember correctly, which may work with less effort.
I believe SwissBianco has made 91mm copper scales, though, that are glued on.
-
@Sazabi said:
I believe SwissBianco has made 91mm copper scales, though, that are glued on.Yes, you're right, the result of placing copper scales to the 91mm model you can see here:
http://knifeclub.com.ua/forum/viewtopic.php?f=89&t=48073
The article written in Ukrainian, so if you need some translation - please ask me.
Shortly: one guy (from Ukraine) ordered these scales and put them to the Fieldmaster instead of old used ones, but **without **glue! -
OR you could check out one of our very own super modders: </post/1367001#new> - the page linked has some brass scales for a Super-Tinker made by our very own Syph007
Check out the entire thread for some great work.
-
Just an idea, how well placed are the pins on a Cadet? Would it be at all possible to get a Cadet and an 84mm Super tinker/Climber+Screwdriver and cut out the space for the screwdriver?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login