Sharpening Methods
-
Another sharpmaker at 40.
-
Diamond steel, pocket stones, pocket steels, pocket diamond steels, worksharp, oil stone, japanese waterstones...... and patience
-
coffee mug... the rough part of the underside xD
-
I'd like to thank y'all for your suggestions. I've continued to use the dual sharpener, and I'm pretty happy with the results, I think stropping will be my next undertaking. I've gone a little crazy with the auctions lately.... trying to cover all my MacGyver episodes... you know how it is. Really torn between the Compact, the Climber, and the Executive right now... but that's another topic.
Happy Holidays, my fellow Knights,
Keep it chivalrous.

-
For me the Victorinox dual sharpener is the best thing I bought. I just don't let my blades get too dull, a few passes regularly and its sharp enough for me

I'm a complete noob at regular sharpening, is the blade is a little dull and I try and sharpen with a stone ill make it even worse... ::)
So for me the sharpener is a lifesaver
-
I'm pretty good with whetstones, but I do use the dual sharpener most of the time because of how easy it is. It keeps my SAKs plenty sharp.
-
Just about 10 months later and my dual sharpener is still my friend... even for dull blades. I've found it's all about repetition. For blades that need more work, it's uniform strokes starting at a high number 15-25 on each side and working your way down... 20 left 20 right 15 left 15 right 10 left 10 right 5 left 5 Right 2:2 repeated 1:1 repeated... you can repeat any of them as needed... I just find with this method it's easier to find that consistent angle and I'm getting El blades as sharp as I want them.
Mags hooked me up with an awesome ceramic rod that I use for blades that just need a touch up and it does a super job. I've been finishing off with a pencil eraser but want to find a good leather strop.
Anyway, it feels good learning some basic sharpening skills, carrying a dull blade is a draaaaag.

-
If I need to touch up the edge I prefer natural stone, which manufactured by opinel, or the peace of leather with dialux paste.
If I need to sharp I prefer Japanese wetstones or if the blade looks very bad - use a diamond sharpeners. -
Sandpaper attached with binderclips in a breadboard. Pulling the spine instead of pushing. I then strop it with my tool belt if im in the province or my shoes. Never really saw the allure of sharpening system since i dont sharpen everyday.
-
Just a bit of old timers experience.........!.!for those who don't have, can't afford, can't find, or otherwise find yourself strop afflicted...........a piece of common fir 2x4 works just as well. Just hold the angle & drag the blade backwards over the surface. The corner of the wood will put a fantastic polish on the blade edge.
-
@Butch said:
...a piece of common fir 2x4 works just as well. Just hold the angle & drag the blade backwards over the surface. The corner of the wood will put a fantastic polish on the blade edge.
I've also used an old belt (one that must have shrunk in the rain or something), a thin piece of balsa wood with compound, newspaper, and cardboard for a strop. I think the key thing is to have a hard surface under these things. I don't think the old-fashioned barber's slack strop works quite as well--they tend to roll the edge slightly.
-
Like others have said here, i also use the Lansky rod system - i use that for my planes too and for my chisel knives. My only criticism is the little screw clamp thingys at the back of the stones break eventually and they're quite expensive to buy here in the uk - at the moment i'm just down to medium and fine stones. I normally finish off with a little ceramic crux sharpener to make them propper little hair poppers!
-
@Butch said:
Just a bit of old timers experience.........!.!for those who don't have, can't afford, can't find, or otherwise find yourself strop afflicted...........a piece of common fir 2x4 works just as well. Just hold the angle & drag the blade backwards over the surface. The corner of the wood will put a fantastic polish on the blade edge.I'll have to try that!

-
Bah, I used to hate sharpening. It really is a skill you have to learn.
And i personally think it's a skill you have to learn if you use knives a lot.
A sharp knife is safer as it takes less effort to cut something.
(But it also takes less effort to cut yourself if you are not careful, but that's another story
)The DC4 stone from Fallknives is already mentioned. This is my go-to travel sharpener. The DC3 is a bit more compact, I prefer the DC4.
Especially hand sharpening is a skill that takes a bit of practice.
However, with a bit of practice you can return a working edge to a blade. It takes a lot of practice to master sharpening though.I am by no means an expert. I went from v-carbide sharpeners to a sharpening stone after I destroyed a kitchen knife. I can also remember using one of those rolling sharpeners on my Handyman. It left a very distinct circle pattern on the blade. The blade remained dull however. >:(
But enough small talk.
I strongly recommend to learn hand sharpening. This let's you sharpen any blade, anywhere. It's a skill for life.However, if you want amazing results with minimal effort, try a sharpening system. Lansky has been mentioned, but I can't tell you much about that. I personally use a Ruixin Pro III sharpening system.
It's a Chinese version of the (famous?) Edge Pro.It fixes the sharpening stone at an angle making the cut consistent over the entire edge. Given that you keep the blade level on the table. It has an angle marking to pre-set your angle. But you can also copy the angle on the blade by passing it alongside a marker. Adjust the angle of the Ruixin/Edge Pro in a way that it takes off all the marking on one go and you have the angle set exactly like the angle on the blade.
The Ruixin has a little learning curve, but it's mostly getting used to the motion.If you have the money, I'd suggest to get an Edge Pro. However, €15,- for the Ruixin is hard to beat and since I'm poor... :'(
In addition to the Ruixin and the Fallkniven DC stones consider the Victorinox Dual Sharpener. Like the one you already have it has a ceramic v-sharpener (set at 30' if I'm correct). In addition it has a ceramic sharpening rod which is also great for sharpening serrated blades. And with the size of a pen, you can take it anywhere.
I've been thinking about making a video about sharpening knives for a while. Perhaps I should.
It's a bit labor intensive, but when I have a video I'll post it here. -
Since this thread started I've discovered the Worksharp. If you have problems getting the angle correct and even then the $25 Worksharp may be for you. It even makes serrated blades razor sharp. For the Money I think it's best portable sharpener on the market.

-
@gene stoner said:
Since this thread started I've discovered the Worksharp. If you have problems getting the angle correct and even then the $25 Worksharp may be for you. It even makes serrated blades razor sharp. For the Money I think it's best portable sharpener on the market.Hmm. I had to look this one up.
This is their product page.I saw it in a store a couple of weeks ago. Felt a bit gimmicky at a glance and I didn't pay much attention to it.
Plus, how many sharpeners do I need?But after reading up on it and watching the demo video on their site I'm tempted to buy one. It sharpens basically everything. If you don't use the angle guides you can use it for any angle you want. Plus is seems very suitable for sharpening large and small serrations.
I'll see if I can spare €36,-. Unfortunately it's a bit more expensive here in Holland. :-[ -
I use the Edge Pro Apex
The spyderco sharpmaker is good to. I use it for touch ups and when I go camping, etc
-
Since this thread started I've discovered the Worksharp. If you have problems getting the angle correct and even then the $25 Worksharp may be for you. It even makes serrated blades razor sharp. For the Money I think it's best portable sharpener on the market.
Hmm. I had to look this one up.
This is their product page.I saw it in a store a couple of weeks ago. Felt a bit gimmicky at a glance and I didn't pay much attention to it.
Plus, how many sharpeners do I need?But after reading up on it and watching the demo video on their site I'm tempted to buy one. It sharpens basically everything. If you don't use the angle guides you can use it for any angle you want. Plus is seems very suitable for sharpening large and small serrations.
I'll see if I can spare €36,-. Unfortunately it's a bit more expensive here in Holland. :-[I have the Worksharp and it's very useful for trips, outdoors and hiking.
But I am most partial to the Spyderco Sharpmaker for 90% of my sharpening, especially recurves and serrated edges.
-
I have a DMT DiamondVee that is made very much like the spyderco. It has a very fine diamond surface & puts an edge on in a hurry. I also have the Lansky diamond rod system but mostly I use a fine diamond steel.
I have just about abandoned anything but fine diamond for sharpening.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login