Sailing multitool
-
I used to work around salt water every day, and the SwissTool or Spirit is perhaps your only real choice for salt water exposure. One of our members works as a member of the Coat Guard in the UK and was part of a lifeboat crew before that, and he swears by the SwissTool as well for much the same reason.
There are some cheapos that are really rust resistant, but I would suggest you avoid those like the plague.
Generally the issue is that rust resistance comes from the addition of chromium to the steel concoction, which is bad as chromium is soft. The more chromium that gets added, the more resistant to rust it is, but the softer the steel is and the less ability it has to be sharpened or keep that edge for when you need it. Somehow Victorinox has come up with a steel that is just about perfect- easy to sharpen, super resistant to rust and staining and takes and holds a good edge.
I wish there were more options I could give you, but I have run the gamut of tools and many have gone the way of my Wingman.
Def
-
Have you considered RangerGrip Boatsman?
This beast is pretty nice and certainly takes some salt too. Still cleaning is a must if you leave it lying unused. -
My hands sweat a lot (A LOT), especially when I'm working, but my Spirit has put up with it for a good couple of years so far with not a hint of any rust anywhere, and I don't take particularly good care of it.
I'd recommend either the Spirit or Swisstool.

-
The only way for sure not to lose a knife or MT is to attach it with about 3 feet of lanyard. That is long enough to use the knife or MT at arms length while it is still attached to your belt or vest, but you have to be aware of that lanyard and take care not to get it snagged on anything. http://www.skippertips.com/public/793.cfm
-
@Alan K. said:
The only way for sure not to lose a knife or MT is to attach it with about 3 feet of lanyard. That is long enough to use the knife or MT at arms length while it is still attached to your belt or vest, but you have to be aware of that lanyard and take care not to get it snagged on anything. http://www.skippertips.com/public/793.cfmGood advice there!
Rule #1 of boating is "Have a knife." Rule #2 is "If it's not secured, it's not yours."
Def
-
@dks said:
with regards to floating unless you tie them to yourself, or some floater, they will sink.Of course, if you tie a SwissTool to yourself, you'll sink. :D
@magentus said:
My hands sweat a lot (A LOT), especially when I'm working, but my Spirit has put up with it for a good couple of years so far with not a hint of any rust anywhere, and I don't take particularly good care of it.I'd recommend either the Spirit or Swisstool.

When you look on eBay, there are a fair amount of beat up SwissTools for sale, but hardly ever are they rusted (aside from the file sometimes). Not exactly a scientific sample, but there's some evidence at least.

-
Welcome to
I think that the above consensus sounds very consistent and I agree that the Spirit and Swisstool are probably your best bet MTwise 
-
I dont see much rusty MTs in general, but even least of those are SAKs.
-
Another point that needs to be made is that multi tools are great for all kinds of things but one thing they are not good for is a Safety / Rescue knife to free you from an entanglement before you drown. For that you need a single blade folder that can be opened with one hand, or a fixed blade knife, and there are several threads on canoe / kayak / rafting / diving knives here on MTO that you should read. Here's a Myerchin rigging knife that I sewed a Leatherman sheath to just to try it out as a working combo. Turned out it was too wide and I kept bumping into things. I have seen this type of combo carried in separate sheaths or in custom leather sheaths that are side by side instead of stacked and it seems to work better that way.
-
i've had a problem with spots of rust on my pfd knife - i wash it after use but there are some times when it might get left in my pfd over night if i get home really late - currently experimenting with using food oils (olive oil) to see if that makes any difference, i prefer not to use "normal" oil (3 in 1, whatever) on my knives.
oh, and welcome to the madhouse :) it's a great place :D
-
Several companies, including Brusletto and Helle, make cork-handled fishing knives that float.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login