Compatibility questions
-
Hi, I'm very interested in modding my PST to exchange the file with a saw, but I have some concern about the tools fitting. Does anyone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder? Thanks a ton!
-
That's something I plan to do with a PST II soon. Someone here did it before, but used a cut down SOG saw.
-
Yip, I fitted a SOG saw into a PST body. Not difficult at all.
Read all about it here:
/topic/48498Pete
-
@irona said:
That's awesome! So you didn't have to mess with the locking notch on the blade at all?That is correct. Once the bottom was aligned, I could see how much needed to be removed from the top. Go slow, if you remove to much it cannot be put back. With the top flush with the handle the locking mechanism lined up as if it was fitted from the factory.
I can take additional pics of the saw inside the tool if you want.
Cheers,
Pete
-
That's awesome! So you didn't have to mess with the locking notch on the blade at all?
That is correct. Once the bottom was aligned, I could see how much needed to be removed from the top. Go slow, if you remove to much it cannot be put back. With the top flush with the handle the locking mechanism lined up as if it was fitted from the factory.
I can take additional pics of the saw inside the tool if you want.
Cheers,
Pete
By the top do you mean the spine of the saw or the top part of the pivot area?
-
@irona said:
By the top do you mean the spine of the saw or the top part of the pivot area?I mean the whole top side of the saw blade from the tip to the pivot end. When I sanded mine down I used a piece of glass and clamped the sanding paper to it. That way I got a perfectly flat surface to sand on.
I hope it is clear.
Pete
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login