Surge tool arrangement
-
Greetings to all on the forum.
Please help.
I have bought the Surge on Ebay (from a power seller) and so far I am very satisfied with the tool but there is one problem.
When I compare it with the surge on the leatherman site I can notice some differences between them.On one side of the surge I have the Clip-point blade and the scissors.
On the other side I have the serrated blade and the saw.the surge on the leatherman web page has the clip-point blade and the saw on one side and the serrated blade and the scissors on the other side.
Next, when I look at the top part of the surge (above the large torx screws) on the web site the end is square-ish. Mine is more like an arch with a flat piece.
Have I been scamed?
EDIT:
When I close te clip-point knife and the exchangable saw they brush against one of the inner sides of the handle.
When I close the serrated blade and the scissors they are in perfect center of the handle.Is this normal?
P.S. Sorry for the bad english.
-
It certainly looks OK to me. I'd imagine that the picture on their website could just be a picture of an earlier run (or newer) than the Surge you have. The photo online could even be of a prototype. I expect Leatherman have just changed a couple of parts in their design as time as gone on and that is why there is some variation.
Welcome to the forum BTW. :)
-
I am very satisfied with the beast but I didn't expect that the metal (pliers) would be on the soft side (used it extensivly for some time and the ridges on the needle nose part have shown noticeable wear and the regular wire cutter is dented (my mistake, I have discovered the hard wire cutters after the damage has been done)).
I am new in the multitool space an this is all new to me.sorry for the bad english
-
@markof said:
I am very satisfied with the beast but I didn't expect that the metal (pliers) would be on the soft side (used it extensivly for some time and the ridges on the needle nose part have shown noticeable wear and the regular wire cutter is dented (my mistake, I have discovered the hard wire cutters after the damage has been done)).
I am new in the multitool space an this is all new to me.sorry for the bad english
Your English is absolutely fine. :)
That's a shame about the pliers. I don't have a Surge myself but I do have other Leathermans and I can't say I have had that problem. Hopefully a Surge owner (there are plenty of them) will chime in soon with their thoughts. :)
Be sure to introduce yourself in the new members forum Markof. :) It's nice to know a little more about the members.
-
Here are some pictures of mine:
Mine looks to be set up different from yours, but then mine is an older one too. What is the date stamp on yours? There should be 4 digits inside the handle somewhere.
Def
-
Look a little closer at that 0703,because Surge didn't come out till 2005,that 3 might be a 5,then it would be one of the oldest ones.
PS: Welcome to the forums Markof!!!

-
I am very satisfied with the beast but I didn't expect that the metal (pliers) would be on the soft side (used it extensivly for some time and the ridges on the needle nose part have shown noticeable wear and the regular wire cutter is dented (my mistake, I have discovered the hard wire cutters after the damage has been done)).
I am new in the multitool space an this is all new to me.sorry for the bad english
Your English is absolutely fine. :)
That's a shame about the pliers. I don't have a Surge myself but I do have other Leathermans and I can't say I have had that problem. Hopefully a Surge owner (there are plenty of them) will chime in soon with their thoughts. :)
Be sure to introduce yourself in the new members forum Markof. :) It's nice to know a little more about the members.
Hm, about the pliers... I thing that It's my fault :D
I've handled some objects with very sharp corners hence the wear and tear.I use it as EDC and I don't feel the weight. One thing that I like is the look on people's faces when I whip it out :D
At first it everybody is judgemental but when I introduce them to the full potential of the surge everybody likes to play with it :D
It is a BEAST!!!.... but a cuddly one :D -
@Smitty44 said:
Look a little closer at that 0703,because Surge didn't come out till 2005,that 3 might be a 5,then it would be one of the oldest ones.PS: Welcome to the forums Markof!!!

I think that it's time for me to move on to a bigger dioptry :D
Yep, you're right. It's a 8, not a 3. .0708.
It looks as if the number matrix (don't know how you name it) on their press is worn out.
Wait, does this mean that my surge came out of the factory 3 months ago?EDIT:
LOL... there are 2 sets of numbers.
On one handle there is 0708 and on the other one 0608.
Maybe it was made at the end of the 6'th month? -
Leathermans frequently have different date codes on the handles. I think it is actually rare to find matching ones :D
Sounds like you have a very new one then. :) That'll probably explain the differences.
-
Mine is a much older one, and according to Ben, very rare, as the date code is 0505 in both handles! :P
You are right, by the way, the code is MMYY.
Def
-
@Benner said:
Leathermans frequently have different date codes on the handles. I think it is actually rare to find matching ones :DSounds like you have a very new one then. :) That'll probably explain the differences.
Can you tell me a bit more on your experiences with the surge (or leatherman's in general).
What type of force can they endure?
I want to know can I depend on it? Is it's massiveness equal to it's endurance?EDIT:
I don't want to go for a few days in the woods and to wonder all the time will the equipment "be there" when I need it. -
Leathermans frequently have different date codes on the handles. I think it is actually rare to find matching ones :D
Sounds like you have a very new one then. :) That'll probably explain the differences.
Can you tell me a bit more on your experiences with the surge (or leatherman's in general).
What type of force can they endure?
I want to know can I depend on it? Is it's massiveness equal to it's endurance?EDIT:
I don't want to go for a few days in the woods and to wonder all the time will the equipment "be there" when I need it.I personally don't have a Surge, but I do frequently EDC an Original Supertool which is one of the most solid and reliable multitools I have ever owned or handled. Leathermans tend to be very solid, reliable tools.
-
I think you are safe taking the Surge out into the woods- it is one tough tool that can take a serious pounding and keep coming back for more. To put it another way, if you are in a situation that is too tough for the Surge, chances are you have bigger problems than a broken multitool!
Most good quality multitools (Leatherman, Victorinox, SOG, Wenger etc) will manage all kinds of abuse without a problem, but I think you'll find that the Surge is one of the toughest around, and even those who don't like the Surge will probably agree that it's within the top 5 of toughest multitools. Where in that top 5 it is differs from one member to another, but I think you are pretty safe with it!
Def
-
Thanks guys.
Yo've helped me a lot

One more question...
In you opinion... Surge vs. Titanium leatherman Charge Titanium? T
his is an ongoing dispute between me and a friend. Yes, you've guessed it. He has the Charge and I have the Surge.EDIT:
When I remove the saw blade and put the file and the diamond sharpener it rattles. It looks to me that the t shank of the file is a bit smaller than the clip on the surge.
The saw has to be shoved in place (a bit to big) an the file rattles (a bit to small)
Do you have these problems -
The titanium serves no other purpose than to make the Charge look cool and cost more. It's not structural, it doesn't cover enough of the tool to add any significant corrosion resistance, and it's in such a small amount that the weight savings is negligible at best.
The Charge is a nice tool, don't get me wrong, it's just somewhat "fancied up" with exotic materials. You really can't say one tool is "better" than the other though, just one is more suited to your needs than the other. The Surge probably has the edge on raw strength, but the Charge is a heck of alot easier to carry every day. And, since both are backed by Leatherman's indestructible warranty, it's really up to personal preference.
Def
-
@Defender said:
The titanium serves no other purpose than to make the Charge look cool and cost more. It's not structural, it doesn't cover enough of the tool to add any significant corrosion resistance, and it's in such a small amount that the weight savings is negligible at best.The Charge is a nice tool, don't get me wrong, it's just somewhat "fancied up" with exotic materials. You really can't say one tool is "better" than the other though, just one is more suited to your needs than the other. The Surge probably has the edge on raw strength, but the Charge is a heck of alot easier to carry every day. And, since both are backed by Leatherman's indestructible warranty, it's really up to personal preference.
Def
Very true, but titanium is just so nice. :D I wish they would make an all ti version. I would pay big bucks for one.

-
:D
I left an edit on an previous post and didn't notice that there is a second page :DEdit:
When I remove the saw blade and put the file and the diamond sharpener it rattles. It looks to me that the t shank of the file is a bit smaller than the clip on the surge.
The saw has to be shoved in place (a bit to big) an the file rattles (a bit to small)
Do you have these problems -
Indestructable warranty?
I bought it over Ebay and I live in Europe. How to claim the warranty?
-
Can you rotate the tools on the surge (and wave/charge I guess) to make it left handed?
I reckon my PST has got bigger balls than the Surge.
Maybe I've just used the PST more and have a better eye for what it can take on.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



