Power Access Owners BEWARE
-
I used my Power Access last night to cut a small tinder block in half and this happened.

I'd feel better if something was broken on it, but it isn't- it is just the cutout in the blade that fits into the locking tab is slightly angled, so when pressure is put on the blade the lock tab lifts and the knife bends backwards.


I tried all of the other tools as well and the same thing happened with the dedicated flathead. I sent the pics off to SOG last night and they have been sent on to the appropriate department, so hopefully I will hear back from them soon. I love the Power Access, but this is a MAJOR problem in my book.
Def
-
Impossible! this tool was inspected and approved by the same people who inspected and approved the legendary Powerduo!
Maybe you are using it wrongly - like when you lot broke the tough-tool
-
Impossible.... this one isn't broken, it's defective.
Seriously, this is a major concern, as there is serious potential for someone's hand to slip when the whole thing suddenly moves. I would strongly suggest everyone tries this (maybe wear some gloves, just in case) with their Power Access. It doesn't take a lot of pressure to make it fail, so don't hurt yourselves trying to force it. I can actually grab the blade with my fingertips (by the sides of course) and make it fail. I'll try to get a video up today that shows what and how it happens. I just wanted to get this up ASAP as I don't want anyone getting hurt by these.
Def
-
Wow!
Thanks for the heads up. -
Well thats not good. Thanks for the heads up bosss.

-
I'm not saying this is common or anything- mine is defective and it could just be "the one."
I just think people need to know and check theirs.
Def
-
Yikes!
That was the only tool in the new line up that I had any kind of confidence in (from a design perspective, based purely on online images). That looks like a severe failing of a very simple function, which as you say, could lead to a nasty injury.
I would like to hope this is just a rogue tool, but my own experience with SOG leaves me less than optimistic.
-
That is royally disappointing

-
Thanks for the heads up

-
I will check mine when it arrives and let you know.
-
I have to admit, after seeing how mine was designed, i had wondered if this was a possibility. However, I am pleased to say that I was unable to replicate the issue Grant is having, even with significant amounts of force applied to my tool.
I can overextend tool if I also intentionally hold the lock open, but I don't see any way to accidentally disengage the lock during use.
-
great....I'm getting one as a birthday present tomorrow. :-(
-
Hopefully it is just your one Grant :ahhh Still the possibility for failure is there so may be more than one :-\
-
@sLaughterMed said:
I have to admit, after seeing how mine was designed, i had wondered if this was a possibility. However, I am pleased to say that I was unable to replicate the issue Grant is having, even with significant amounts of force applied to my tool.I can overextend tool if I also intentionally hold the lock open, but I don't see any way to accidentally disengage the lock during use.
Good to know. Thanks for the info.
-
Oh no. The one new SOG I was kinda waiting to get later on and now I am not so sure.
-
The looming question of faulty design or defect qc issue? Pretty much hope it's the latter. Good heads up though GL

-
got mine as a gift today. it seems not to have this issue. all-in-all, I like it a lot. so far, anyway.
-
@Padre said:
Oh no. The one new SOG I was kinda waiting to get later on and now I am not so sure.I have yet to hear of any tool from any manufacturer that didn't have a QC issue at one point or another. I had a Sidekick with one screwdriver not ground down. It happens, and I wouldn't suggest that you write off any tool or brand because of one problem.
So far it seems like I'm the only one, and this is the second Power Access I have had in my hands to play with.
I only mentioned it to warn folks who had them to try it out, not to scare people off buying them. Issues happen, especially on an initial run.
Def
-
@MusicMen said:
I will check mine when it arrives and let you know.Mine has arrived
and been checked out. It does not have the problem shown in the OP. I put quite a bit of force on it. None of the tools moved. Seems like a solid tool. I will be carrying it next week.Oh, and I got it to be flippy with some oil on the hinge points. Flips nicely.
I just need to figure out how not to smash my knuckles. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




