Multitools vs. SAK multis
-
Like Aloha, I'm getting saddle sores from the amount of times I've switched out on this. I EDC a Rebar on my duty belt and vary between SAKs, Opinel, and Gerber multi tool's at home. The craziest thing that just occurred to me the other day is I used the knife blade in my Rebar (and my Center Drive) more than any other tool in either one of them. Maybe I should just pack a No. 9 Opie?
-
@Barry Rowland said:
Like Aloha, I'm getting saddle sores from the amount of times I've switched out on this. I EDC a Rebar on my duty belt and vary between SAKs, Opinel, and Gerber multi tool's at home. The craziest thing that just occurred to me the other day is I used the knife blade in my Rebar (and my Center Drive) more than any other tool in either one of them. Maybe I should just pack a No. 9 Opie?Stop. Barry. Please. You're killing me. I can feel it, Dave. My. mind. is. go in g
-
@El Corkscrew said:
I was Swiss Army born and Swiss army bred, and when I die I'll be Swiss Army dead.I prefer the SAK for it's looks, accessibility, practicality, pocket-ability, and just the fact that they might be the coolest thing on Earth. No hate for other tools, just an abundance of love for SAKs. I do not consider pliers to be an EDC need for me, though if that's what you need it seems the Swiss Tool stands up to most any other plier-based multi... but I'm no expert and I'm sure a multitude of Leatherman/Gerber enthusiasts would damn me for my beliefs. :D

Quoting just because it's a beautiful display of emoji!
-
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
-
Good afternoon, I am a HAL 9000 Computer. ... daisy... daisy.


-
@4everYoung said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
??? -
@El Corkscrew said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???I love the Skeletool and for the past 3 years of so I've carried it on a belt loop via the carabiner/bottle opener. It's been fantastic for just about everything I've needed- except when I could have used scissors, tweezers, a magnifying glass, file... Somewhat kidding but I do like the "extras" on a SAK that the Skeletool lacks. Even still, if all I've got (in addition to my EDC Spyderco PM2) is the Skeletool CX, I'm rarely wanting. The one-handed locking blade is awesome.
-
@El Corkscrew said:
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???
https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Large-Pocket-Knives/Sentinel-Clip/p/0.8416.M3 Also available partially serrated. -
Nice one Fivesense
Sooner or later everyone comes to realise that .......
Spoiler:
**All you ever need is the power of the SAK **
;) -
It's been very interesting to read all the different opinions on this.
Reading them however gave me an idea for what might also be an interesting discussion too:How often do you choose a Sak or Milti over dedicated tools when you have them (tools) readily available?
From what I've seen a lot of you would always choose primarily a Sak or Multi every time you need a tool, and just go to dedicated ones when those come short for the job... I think... Could be wrong...

I'm really the opposite though... For example, If I'm near tools and I need, say, a screwdriver I don't reach for the Sak in my pocket, I go yo my tools and get a real screwdriver... The same for everything else.
I would love to hear all the different opinions on this too, it also seems an interesting topic to me

-
I usually give my SAK/mt a crack at it before I go to my toolbox. I'm rapidly reaching the stage of life to which a mag glass is becoming more of a necessity than a luxury so I've my SAK out already. Maybe it is the MacGyver in me but I really do feel a sense of accomplishment when I tackle a job with a SAK! -
For work, I tend to reach for what closest, usually my MT.
For off days, I tend to reach for whats closest, usually my Tinker or Squirt P4 or PW2 but I won't usually push it.
I will always defer to dedicated tools when I think the MT or SAK wont cut it. This also applies to work.
I did tell a story where I was up on an embankment and really was just lazy to go get a real tool. I used my Manager on my keyring and was super surprised how well it worked. I pushed that little guy well beyond what it was meant to do. I came away impressed and relieve it didn't break. I wont ever do that again but it was nice to know it took the punishment.
-
@El Corkscrew said:
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???
https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Large-Pocket-Knives/Sentinel-Clip/p/0.8416.M3 Also available partially serrated.Guess I wasn't looking in the right place. I'm pretty clueless when it comes to 111mm.

-
@El Corkscrew said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???I love the Skeletool and for the past 3 years of so I've carried it on a belt loop via the carabiner/bottle opener. It's been fantastic for just about everything I've needed- except when I could have used scissors, tweezers, a magnifying glass, file... Somewhat kidding but I do like the "extras" on a SAK that the Skeletool lacks. Even still, if all I've got (in addition to my EDC Spyderco PM2) is the Skeletool CX, I'm rarely wanting. The one-handed locking blade is awesome.
That's why I always carry a Rambler too [emoji16]. It covers the T&T plus scissors tiny Phillips and extra blade. By far my favorite SAK.
-
@El Corkscrew said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???I borrowed a friends 111 but I didn't care for it. The only part I liked was the OHO blade. But it was too bulky imo. I'd rather give up the OHO blade and carry a 91/93mm SAK. They ride much better in pocket.
Plus a single layer like a sentinel, it just not practical. Imo there are better dedicated OHO folders out there.
Now I've seen a mod that someone had swapped a small OHO blade( maybe spyderco)into a 91mm SAK (I think). That would be a pretty cool mod. -
@El Corkscrew said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???I borrowed a friends 111 but I didn't care for it. The only part I liked was the OHO blade. But it was too bulky imo. I'd rather give up the OHO blade and carry a 91/93mm SAK. They ride much better in pocket.
Plus a single layer like a sentinel, it just not practical. Imo there are better dedicated OHO folders out there.
Now I've seen a mod that someone had swapped a small OHO blade( maybe spyderco)into a 91mm SAK (I think). That would be a pretty cool mod.I've seen a 58mm with spyderco OHO blade.

-
@Pablo O'Brien said:
@El Corkscrew said:
I'm kinda like aloha. I've swapped my thoughts on this a lot. However I always seem to gravitate towards the Skeletool. I'm not a fan or the bigger leatherman's or MTs. I find them too heavy/bulky to pocket carry. SAKs are small but lack on key feature for me, one hand open blades. The smaller MTs like a squirt are nice imo. If I'm looking for a companion to a dedicated folder it's a toss up between a SAK or small Mt. But if I can only pick one, the Skeletool cx wins every time.
Gotta be honest, the Skeletool does seem pretty practical if you need a decent pair of pliers in your edc without getting bulky. Just checked.. guess they don't put the OH 111mm blade in a single layer?
???I borrowed a friends 111 but I didn't care for it. The only part I liked was the OHO blade. But it was too bulky imo. I'd rather give up the OHO blade and carry a 91/93mm SAK. They ride much better in pocket.
Plus a single layer like a sentinel, it just not practical. Imo there are better dedicated OHO folders out there.
Now I've seen a mod that someone had swapped a small OHO blade( maybe spyderco)into a 91mm SAK (I think). That would be a pretty cool mod.I've seen a 58mm with spyderco OHO blade.

That could have been it. It was a while back.
-
/post/1230922
-
/post/1046478

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login