Multitools vs. SAK multis
-
Ok. So what's the least expensive SAK model with pliers on them?
-
Or Angler?
-
Arbitrary webshop: Angler €40.19, Deluxe Tinker €42.93. You can find both new for quite some less.
-
I'll be looking into these more, wouldn't mind having one at some point. But looking at the pliers, they seem to be in a completely different league than the Leathermans. Plus, no wire cutters, hard or soft.
-
A little sidetrack on the topic of using a MT professionally: Some years ago I hired a company to do some electric installation work. That included lots of screwdriving. They arrived in a well equipped van. I left them to their own devices, but before lunch I went by to have a look at their progress.
I got surprised and had some indelicate smurfing thoughts when I realized that the main guy was using a multi-tool for the screwdriving instead of a faster dedicated screwdriver - or better yet, an electric one.
To me a multi-tool makes perfect sense in a professional setting for small tasks that comes up, or when dedicated tools are not possible to drag along or just far away. But if a professional have all the proper dedicated tools well within reach, but instead decide to use a multitool for a major and easily planned task, and then charges by the hour... That company wasn't hired again.
-
Although vics pliers are handy for small jobs,there not a patch on larger LM pliers, don't get me wrong I love sak's but I prefer say the juices pliers as more leverage,I personaly don't find it a hassle opening up a LM or other MT's to get to the pliers etc,it all comes down to what works for you in your life
when I did the maitanence job I had all dedicated tools,but as it was a big building a MT came in handy on more than one occasion, and bigger pliers are very usefull 
-
Interesting debates people.
For me I do not have a job that needs tools (office) - But I am reasonably practical, love DIY, woodwork, and am always fixing things and tinkering around :D
I would say I nearly always do use a SAK or multi over a dedicated tool
- I refuse to use the term* 'real' *or 'proper' tool - as SAKs and multis are proper tools!!
Two reasons for this:
-
I like using them !!
-
They are always, without question, the most convenient to access, at least in my environment
This is because I*** always ***have a SAK in my pocket weekdays
- And usually a pliers based in pocket or on belt at the weekend (Juice or Spirit!)

There are also SAKs and multis scattered** everywhere **around the house :D
...... Bedside drawer, kitchen drawer, in the car, in the desk, bathroom cabinet (Classic for nails), in the occasional table in the hallway - You get the picture :D
I have a reasonable set of tools in my tool box in the garage.
However I do have a Supertool 300 in the cupboard in the garage where my tool box is - I often use that as it saves me the massive inconvenience :o of opening the tool box ;)
Having said all that - I was once in a situation (up a ladder installing a new light on the ceiling, I think) - with my Supertool, when I needed pliers, screwdrivers and blade - It was definitely a bit of a pain opening and closing the whole thing up constantly - Dedicated tools definitely better if you are constantly switching.
The other time I definitely prefer dedicated tools is if I am dong a lot of screwing - (ahem) - Eg assembling something
I don't find the multi SDs that convenient/easy/comfortable for long periods of screwing with multiple screws- Mainly I think as a dedicated SD handle is very comfortable to use - whereas a multi is not
And I have a ratchet SD in my tool box - which of course makes screwing very easy and quick.
Edit PS. And if I am doing a big job, as opposed to fixing/small job/tinkering etc then usually dedicated tools, but occasionally a sprinkling of mulltis too, if the specific tool is needed (eg knife blade/wire striper/file sometimes/small pliers)
So I think in summary - Dedicated tools* always* better and easier - Multis ***always ***more convenient - Available, lighter, more transportable etc etc
My two penneth!!
- I refuse to use the term* 'real' *or 'proper' tool - as SAKs and multis are proper tools!!
-
@kaput said:
I'll be looking into these more, wouldn't mind having one at some point. But looking at the pliers, they seem to be in a completely different league than the Leathermans. Plus, no wire cutters, hard or soft.I bought a SAK Mechanic some time ago just for the Vic pliers. I wanted to try them out. At first I wasn't that impressed with them. Then I figured out their niche in my pocket space. I was trying to use the mechanic as a substitute for my Skeletool. It simply feels don't stack up in the plier dept.
However once I started treating more like squirt pliers. They became more useful. The mechanic become a great pairing with a folder for like duty days.
It's my second most carries SAK now. Only behind my rambler that's on my keychain.

-
I'll be looking into these more, wouldn't mind having one at some point. But looking at the pliers, they seem to be in a completely different league than the Leathermans. Plus, no wire cutters, hard or soft.
I bought a SAK Mechanic some time ago just for the Vic pliers. I wanted to try them out. At first I wasn't that impressed with them. Then I figured out their niche in my pocket space. I was trying to use the mechanic as a substitute for my Skeletool. It simply feels don't stack up in the plier dept.
However once I started treating more like squirt pliers. They became more useful. The mechanic become a great pairing with a folder for like duty days.
It's my second most carries SAK now. Only behind my rambler that's on my keychain.

Thanks for that honest opinion. I appreciate it. I'm going to put a SAK with pliers on my want list. I just feel I need them to be comforatable. Thanks for the pic too

-
i used the awl on my Core to make about 20 holes in leather. It was a pain in the hand, really.
After the thing my hand was red and hurt, so much pressing and twisting around the Core's handles... -
Multitool. Have one on you for the UNINTENDED fix.
Dedicated Tools. In a bag or tool box for jobs you know you'll need them.
SAK. Always on you, great for the MacGuyver in all us.
So, I see a MT as the perfect insurance for anyone, professional or not. You arrive and have no clue what tools you'll need. You lug a bag full of tools no problem but also have your MT on you. As you ascend the ladder or crawl into a tight space the issue can be resolved with your experience and MT. No need to get back to your tool bag, problem solved.
I've been on jobs where I had no clue I'd even need tools. Sure enough something need a tighten or loosen and thankfully I've had my MT otherwise I'd need to fetch a tool off the truck. In the grander scheme of things not a big deal but time is money.
-
@Aloha007 said:
Multitool. Have one on you for the UNINTENDED fix.Dedicated Tools. In a bag or tool box for jobs you know you'll need them.
SAK. Always on you, great for the MacGuyver in all us.
So, I see a MT as the perfect insurance for anyone, professional or not. You arrive and have no clue what tools you'll need. You lug a bag full of tools no problem but also have your MT on you. As you ascend the ladder or crawl into a tight space the issue can be resolved with your experience and MT. No need to get back to your tool bag, problem solved.
I've been on jobs where I had no clue I'd even need tools. Sure enough something need a tighten or loosen and thankfully I've had my MT otherwise I'd need to fetch a tool off the truck. In the grander scheme of things not a big deal but time is money.
I couldn't have put it better myself. +1 mate!!

-
+2!!
-
+3

-
@fivesense said:
I didn't know where to put this and can probably also venture on over to the Leatherman and Gerber sections. I imagine there's plenty of crossover though.In general, do you use the traditional multitools (i.e. Leatherman Wave/Swisstool/Gerber Diesel) for heavier duty work and the SAKs (Swiss Champ, etc...) for regular daily tasks? Kind of a clumsy question as "heavier duty" and "regular daily tasks" are subjective. Not only that, but there are so many options in size and weight I suppose it's really just personal preference.
I've used my Leatherman Skeletool CX for cutting, tightening screws, plier tasks, but generally nothing my Swiss Champ can't handle. For me, if I start getting into "heavier duty" tasks, I head to the tool box for the appropriate single tool. But for most of what I come across during the day, I love the "toolbox" convenience of my individual SAKs.
The main reason I got back into SAKs is that I was on my back deck a couple weeks ago and had to pull up a few 2x6 boards. Some of the old screws were deeply embedded and filled in with dirt. To gain purchase on them with my drill, I had to clean out the screw heads and in an effort to be "convenient" I poked around with the blade of my Mora Companion; it and my Skeletool were on my belt but I figured I'd bang around with the less expensive Mora. Well, mission accomplished but with some dings to the blade (which I easily remedied on the sharpener and whetstone. It made me realize the benefit of an awl, which even the Skeletool doesn't have.
So for roughly the same weight as the Skeletool CX, I can get 3x the functionality with a Swiss Champ or similar. Plus, the additional tools mean I will more often have the right tool for the job. Sure, I can get this with many of the other traditional multitools, but often at a much heavier weight. So the conclusion to this rambling missive is that I'm leaning more toward SAK for multi-tool functionality. I still love Leatherman etc... but my little red toolbox is now my EDC.
I own Leatherman Charge TTI's, Surges, Supertools, and Victorinox Swisstools, and a lot of the various Victorinox line ( I used to be a Vic dealer)
My preference for everyday carry is the Swiss Champ. I have carried one since they first came out.
As far as the plier-based multi-tools go, I prefer the Leatherman Supertool 300.
If I had a job where I needed full size pliers all the time, I would carry both a Supertool 300 and a Swiss Champ.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
