Fire starting methods
-
Wait why am I disregarding 2 limbs that are perfectly fine at the moment (sure bumps and bruises in the past but they are functional). If you could hold on to the piston with your legs and pull the rod with your hand it could work
Between your feet may be easier

that's my line of thought too
These work one handed http://www.ustbrands.com/product/sparkie-fire-starter/
-
Ferrocerium. In a lighter. Sometimes you need a flame, not a spark and you can use them one handed.
They have issues. WHen it's really cold, strike anywhere matches.
And a ferro rod, always, just in case. I have a Sparkie (the little brother of the Blast Match) in my car kit and the ultra water proof kit I built for a PFD pocket, but generally I use a rod.
And when in doubt, while certain people won't let me play with thermite, I can get highway flares at walmart.
-
Torch lighter for me. I got into them when I starting smoking cigars and have a couple of nice, elegant ones but found these on Amazon, https://www.amazon.com/dp/B00IN7CFBY/ref=twister_B00IN7CF5K?_encoding=UTF8&th=1, for around 70 cents a piece. You could probably ignite a wet 2 x 4 with these. The flame can be aimed in all directions and works when it's windy. It's like the multitool of lighters

-
Nice ideas. Just one little thing - do not experiment with fresnel lenses when you're unsure if you can put out the fire
don't ask how I learned that lesson -
@theonew said:
Torch lighter for me. I got into them when I starting smoking cigars and have a couple of nice, elegant ones but found these on Amazon, https://www.amazon.com/dp/B00IN7CFBY/ref=twister_B00IN7CF5K?_encoding=UTF8&th=1, for around 70 cents a piece. You could probably ignite a wet 2 x 4 with these. The flame can be aimed in all directions and works when it's windy. It's like the multitool of lighters
Do they work well? I have tried supposedly more expensive versions but they have usually stopped working in just a few weeks.
-
Nice ideas. Just one little thing - do not experiment with fresnel lenses when you're unsure if you can put out the fire
don't ask how I learned that lessonOk now you've said that, come on tell us

I was experimenting with a fresnel lens and several tinders. Wood scrapings, silver birch bark that was also scraped, some sort of fat impregnated paper and jute twine. Birch bark and wood scrapings worked quite well so I moved on to that paper. But to be efficient I've already made a bird nest from the twine and put it halfway under my shoe so it doesn't fly away in the wind. Someone asked me a question and brilliantly I moved the lens so that the paper doesn't catch fire while I'm not looking. Only issue was that the jute did catch fire and so did my shoe :facepal:

-
Nice ideas. Just one little thing - do not experiment with fresnel lenses when you're unsure if you can put out the fire
don't ask how I learned that lessonOk now you've said that, come on tell us

I was experimenting with a fresnel lens and several tinders. Wood scrapings, silver birch bark that was also scraped, some sort of fat impregnated paper and jute twine. Birch bark and wood scrapings worked quite well so I moved on to that paper. But to be efficient I've already made a bird nest from the twine and put it halfway under my shoe so it doesn't fly away in the wind. Someone asked me a question and brilliantly I moved the lens so that the paper doesn't catch fire while I'm not looking. Only issue was that the jute did catch fire and so did my shoe


Did you get to do the hot shoe shuffle to extinguish it
-
@Fortytwo said:
Do they work well? I have tried supposedly more expensive versions but they have usually stopped working in just a few weeks.They're not super high quality and out of a batch of 10 you may get one where the piezo igniter fails within 10 or 20 clicks but most seem to last at least 2 months and many thousands of clicks. The one on my desk that gets used many times a day is going on its third month with probably around 10 refills. Not bad for $.70.
The trick to refilling them is to put them in the freezer for an hour before filling. Also they seem to be filled at the factory using butane under much higher pressure than what you get in a can which means it is impossible to top up. Just wait until the factory butane is done before trying to refill.
The flame is usually excellent, strong and nicely focused. Occasionally they are set too low at the factory but I've been able to take off the metal shroud and increase the flame height by adjusting the flame adjuster.
I have a Xikar and a Blazer torch lighter that cost around $20 - $30 that have lasted for years now. But I still prefer these cheapies since they are slimmer and weigh much less.
-
Nice ideas. Just one little thing - do not experiment with fresnel lenses when you're unsure if you can put out the fire
don't ask how I learned that lessonOk now you've said that, come on tell us

I was experimenting with a fresnel lens and several tinders. Wood scrapings, silver birch bark that was also scraped, some sort of fat impregnated paper and jute twine. Birch bark and wood scrapings worked quite well so I moved on to that paper. But to be efficient I've already made a bird nest from the twine and put it halfway under my shoe so it doesn't fly away in the wind. Someone asked me a question and brilliantly I moved the lens so that the paper doesn't catch fire while I'm not looking. Only issue was that the jute did catch fire and so did my shoe


Did you get to do the hot shoe shuffle to extinguish it
Yep. That was the point I realized that smart dumbasses really do exist
-
Do they work well? I have tried supposedly more expensive versions but they have usually stopped working in just a few weeks.
They're not super high quality and out of a batch of 10 you may get one where the piezo igniter fails within 10 or 20 clicks but most seem to last at least 2 months and many thousands of clicks. The one on my desk that gets used many times a day is going on its third month with probably around 10 refills. Not bad for $.70.
The trick to refilling them is to put them in the freezer for an hour before filling. Also they seem to be filled at the factory using butane under much higher pressure than what you get in a can which means it is impossible to top up. Just wait until the factory butane is done before trying to refill.
The flame is usually excellent, strong and nicely focused. Occasionally they are set too low at the factory but I've been able to take off the metal shroud and increase the flame height by adjusting the flame adjuster.
I have a Xikar and a Blazer torch lighter that cost around $20 - $30 that have lasted for years now. But I still prefer these cheapies since they are slimmer and weigh much less.
Nice, thanks!
-
Well this is my backup kit. Excuse the filter, couldn't get a decent enough shot so took that shortcut.
The logic is simple - it is all for the "I'm dumb and can't get things going by normal means". Magbar, fatwood scrapings, fat paper all help with marginal materials. And while there are people who would go on 4 page long rants about how that is cheating and letting people use marginal materials, I'm one of the guys who'd put gasoline on fatwood shavings and magnesium scrapings just to make sure my behind has a fire. I've spent a few days and nights too many cold and wet to be bothered by the crudeness of my means.
Plus I'm really not going to fall a tree and process it just to make beans and coffee if the easy to get fuel needs a bit of a kick start.What is glaringly missing is the bicycle inner tube that was usually there. Vaseline cottonballs are nice but I'd rather put them with the ferro rod that is usually used.
-
@styx said:
And here is a little challenge to spice things up - start a fire with your off hand. Old challenge, easily done with a lighter but what about other methodsMissed that.......my answer stays the same

Fire piston. Reusable indefinitely.
True......if you have tinder and you don't bend or break it while trying.
I was obsessed with adding every possible weapon to the fire-making arsenal, and you mentioned 2 that I've abandoned completely..........
I was nervous the entire time I had Potassium permanganate and Glycerin in my kit, kept imagining a perished container and arriving at a burnt out house.......or a backpack catching fire thanks to a leak :ahhh
Love the concept of a fire piston, but I didn't manage to build or buy one that convinced me, and they are bloody fiddly!
The trick to refilling them is to put them in the freezer for an hour before filling. Also they seem to be filled at the factory using butane under much higher pressure than what you get in a can which means it is impossible to top up. Just wait until the factory butane is done before trying to refill.
Just a theory, but it seems to me you end up with some propellant from the refill in the lighter, I've had good results with emptying the lighter completely before a refill.
-
@Gerhard Gerber said:
What is glaringly missing is the bicycle inner tube that was usually there. Vaseline cottonballs are nice but I'd rather put them with the ferro rod that is usually used.
And a full-size ferro rod IMHO.

That's in the atuff I normally use pocket. The magbar has one on it, although small. When that ferro rod gets used up, I'll break off the remains and put a larger ferro rod in the tin
-
Big fan of Jute Twine. Making it water resistant adds a layer of piece of mind. I also like Magnesium as well. That stuff is wicked but marginal tinder can still present issues. I don't think you can go wrong with ferro rod.
-
@Aloha007 said:
Big fan of Jute Twine. Making it water resistant adds a layer of piece of mind. I also like Magnesium as well. That stuff is wicked but marginal tinder can still present issues. I don't think you can go wrong with ferro rod.I wax my own jute, got a bunch of it in my hiking bag together with slivers of fatwood. Together they're really nice and easy to use. Never could get magnesium to work well, the shavings blow away in the slightest breeze.
-
Fireworks and old fuel

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
