When screwing....
-
Perhaps my eyes are deceiving me because of the odd diamond shape of the inline Phillips bit, but when compared to the backside #2 Phillips on the Craftsman the inline Phillips on the Swiss Champ doesn't look like a true #2. Maybe they made the tip narrow more abruptly with the diamond shape to make it more usable for smaller screws too?
The more you KNOW, the less you carry. The less you know, the more you carry. ~Mors Kochanski
-
@Pablo O'Brien said:
I think that the can opener can take more torque than the backside Phillips anyway.

Agree.
In the comments on my Facebook post, some say the worst is the Combo tool, and the top honcho is the Cybertool's
Can the Cybertool take more torque than the regular inline Phillips ?
I don't think so, as the cybertool Philips bit is smaller.

Basically the cybertool Philips bit is sized for computer screws.Oh. So the inline Philips is the best SAK tool for screwing?

Not quite. I think that the inline philips is the STRONGEST, and fits in bigger screws than the cybertool philips does. I don't have a cybertool, so someone correct me if I'm wrong.

The cybertool screwdriver is still awesome, because of the VARIETY of screws types and sizes that it can tackle.

-
@Pablo O'Brien said:
@Pablo O'Brien said:
I think that the can opener can take more torque than the backside Phillips anyway.

Agree.
In the comments on my Facebook post, some say the worst is the Combo tool, and the top honcho is the Cybertool's
Can the Cybertool take more torque than the regular inline Phillips ?
I don't think so, as the cybertool Philips bit is smaller.

Basically the cybertool Philips bit is sized for computer screws.Oh. So the inline Philips is the best SAK tool for screwing?

Not quite. I think that the inline philips is the STRONGEST, and fits in bigger screws than the cybertool philips does. I don't have a cybertool, so someone correct me if I'm wrong.

The cybertool screwdriver is still awesome, because of the VARIETY of screws types and sizes that it can tackle.

For someone like us who don't own a Cybertool, your statements makes sense, even if we don't
:D -
@Tired_Yeti said:
Perhaps my eyes are deceiving me because of the odd diamond shape of the inline Phillips bit, but when compared to the backside #2 Phillips on the Craftsman the inline Phillips on the Swiss Champ doesn't look like a true #2. Maybe they made the tip narrow more abruptly with the diamond shape to make it more usable for smaller screws too?The more you KNOW, the less you carry. The less you know, the more you carry. ~Mors Kochanski
Yes, they seem to have tweaked it to fit in smaller screws.

Looking as it, the inline philips seems to also be a teeny bit smaller.
Maybe the inline philips is size #1.5? :D -
Having a good phillips driver is very important to me and which is why I carried a SAK with the inline driver for several years. The problem though is that while the inline phillips is sturdy and can handle recessed screws, two of my top priorities and the reason I haven't picked up a SAK with the Cybertool, it just doesn't fit well in phillips which are smaller than a #3 and most of the screws I encounter are #1 and #2 sized. On smaller screws it tends to cam out easily and on recessed screws it can be hard to get a sense of it is engaged well. It usually gets the job done but oftentimes you really have to press against the screw with a lot of force to keep it in place. My solution has been to offload this requirement from my SAK to my keychain using one of these tools:

And now my edc SAK is a Wenger Backpacker II which has no viable phillips driving capability.
-
To get things straight, the Cybertool can take ALOT of torque.
I fact the backspring is just as wide as the inline Philips' but made in 2 sections so the backsprings can adjust and bend along in case of over-torque.
And let's be honest.
If a screw is so tight that you bend your SAK's driver, you should've gotten a dedicated screwdriver in the first place. -
While the Cybertool may be able to take a lot of torque it won't work well with recessed screws :-\
-
@theonew said:
While the Cybertool may be able to take a lot of torque it won't work well with recessed screws :-\But it's only about 5-6mm wide? Which means it can access every screw that is accessable with a cordless driver
even regular drivers start to get in trouble with a PH2 that is deeper then the inline Philips can get.An inline Philips might get to more recessed screws compared to the CT, but only for about an Inch/2.5cm.
Keep in mind that a SAK still is a compromise and not a do-it-all. -
Have to admit on my statement about dedicated drivers getting in trouble with screws deeper then an inch:
In my line of work I ALWAYS use insulated screwdrivers instead of regular ones. The insulation turns them tapered which causes this issue, while it's not an issue on regular drivers. My bad! -
This is a hot topic! :D
My favorite SAK is the +B Carver SW. It doesn´t have any openers or screw drivers.
-
@Ronald Schröder said:
This is a hot topic! :D
My favorite SAK is the +B Carver SW. It doesn´t have any openers or screw drivers.
It shows we all like to screw! Apart from you that is...

It only shows I´m using a dedicated tool. :D
-
Spoiler:
I personally prefer a hammer drill... oh, never mind. I see where you're going.This is why I carry a pliers based multi with a SAK. My bare minimum and bladeless carry options are built on havein the cheaper hardware store versions of the Countycomm driver keys.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
