Plier cutters fix?
-
U have to identify if it's the pliers' pivot that's given u problem or if the issue is really on the cutter side.
Both are fixable by the user. But if the pivot play is the issue, u may want to send back to leatherman.
-
From what I have experienced it is most likely the plier head that is causing the misalignment.
I've had this problem on all 4 OHTs that have passed through my hands. Keyword here is passed. I want to like the tool, but the plier misalignment on all of them was just too much.
-
Small pieces of shim behind the cutters? Beer can or similar.
(literally).Scratch that, wrong way round. What you need is an inverse shim. ;)
-
@hiraethus said:
Small pieces of shim behind the cutters? Beer can or similar.
(literally).Scratch that, wrong way round. What you need is an inverse shim. ;)
About -0.5mm thick, right? ;)
-
The plier tips are ever so slightly off. I can encourage them to meet but there's still a gap at the cutters. I think they were good when I first bought it but have moved.
I don't want to send it away as everything else is perfect. -
@Syncop8r said:
The plier tips are ever so slightly off. I can encourage them to meet but there's still a gap at the cutters. I think they were good when I first bought it but have moved.
I don't want to send it away as everything else is perfect.I have 5 OHTs.. None of their pliers tip aligns...
You could use a shim to force the cutter to tilt at a slight inward angle. Closing the gap between them. I use a 0.5mm fishing line. Works for me. It's all trial and error to find the correct thickness and position to place that small piece of line. See the sketch for explanation. Place the fishing line below the cutter of course.. Once u tighten the screw, the cutter will tilt inwards.
-
Sorry I forgot the pic.. :P

-
Great idea.

I thought of another solution, but it's more work - filing a step in the back of each cutter. -
@Sam Lim said:
Great idea.

I thought of another solution, but it's more work - filing a step in the back of each cutter.I did this on the gerber with replaceble cutter. The back of those are not flushed. They have some kind of raised foots to rest the cutter on.
So you have had this problem with Gerbers too then?
-
@Sam Lim said:
Great idea.

I thought of another solution, but it's more work - filing a step in the back of each cutter.I did this on the gerber with replaceble cutter. The back of those are not flushed. They have some kind of raised foots to rest the cutter on.
So you have had this problem with Gerbers too then?
Yes some of them. I think more or less it happens to some of them. Not all are made equal or so perfectly.. I do alot of soft copper cable cutting. I need cutters that are perfectly aligned. If not they will just fold over and jam up the pliers. I think replaceable cutter are better in the sense that they can be "tuned/adjusted".
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

