Non Multitools
-
... They declined as his had little marks on the side of the head, a result of straightening nails that have bent as they are being driven in, which everyone does.
I hope your friend took his business elsewhere.
It was a warrantee (or guarantee?
) issue, he was taking it back to where he had purchased it from.I thought you meant Estwing declined. What's their return policy?
Anyway, I think the retailer is at fault here. A happy customer is more likely to come back.

-
@firiki said:
I went through about ten 8-inch copies to find one with perfectly parallel jaws when fully closed, which makes me wonder whether the good people at BAHCO (a SNAP-ON affiliate, remember) find this acceptable and if maybe I'm just being too picky?But then on my lowly 6'' UNIOR this never happens, on my 8'' IREGA it happened a few times out of several I checked and on my 10" EXPERT that happens every time but I already said that one's not really good. Beefy and slippery yes, much good no.
I'm not sure a test of parallel jaws when fully close is the most relevant test? After all that is equal to gripping a zero size bolt which nobody actually has - there might even be slack that tightens up and become parallel with actual use pressure. A better test might be to check the grip with some pressure added at relevant sizes? Granted that is not so easy in shops, and parallel stop do give some indication of whether sloppy or not.
Another thing I ponder is whether parallel is really that important at all? Adjustable wrenches should be rotated/ pulled towards the movable jaw and then the force and contact with the nut is basically only at the outermost part of the moveable jaw. Whether it makes contact anywhere else on the moveable jaw is of little importance. (It might even be a good idea with ever so little clearance at other areas so it wont connect with the wrong area first when closing).
Personally I've come to prefer plier wrenches over adjustable wrenches. They adjust faster, have perfect grips, and ratchet action as a bonus. (Unless too close to their max size).
-
I went through about ten 8-inch copies to find one with perfectly parallel jaws when fully closed, which makes me wonder whether the good people at BAHCO (a SNAP-ON affiliate, remember) find this acceptable and if maybe I'm just being too picky?
But then on my lowly 6'' UNIOR this never happens, on my 8'' IREGA it happened a few times out of several I checked and on my 10" EXPERT that happens every time but I already said that one's not really good. Beefy and slippery yes, much good no.
I'm not sure a test of parallel jaws when fully close is the most relevant test? After all that is equal to gripping a zero size bolt which nobody actually has - there might even be slack that tightens up and become parallel with actual use pressure. A better test might be to check the grip with some pressure added at relevant sizes? Granted that is not so easy in shops, and parallel stop do give some indication of whether sloppy or not.
I just do the wiggle test - if the moving bit wiggles a lot - pffft, if it wiggles only a little bit - fine.
-
@Fuzzbucket said:
I just do the wiggle test - if the moving bit wiggles a lot - pffft, if it wiggles only a little bit - fine.I do the same as an indicator of overall quality.

No guarantee though - I suspect there are manufacturers out there with a great fitting but simply wrongly shaped movable jaw. :ahhh (If something can be done wrong then someone is doing it - likely a relative of Murphy).
-
I just do the wiggle test - if the moving bit wiggles a lot - pffft, if it wiggles only a little bit - fine.
I do the same as an indicator of overall quality.

No guarantee though - I suspect there are manufacturers out there with a great fitting but simply wrongly shaped movable jaw. :ahhh (If something can be done wrong then someone is doing it - likely a relative of Murphy).
Ha-ha - clink!
I think the classic Bahco ones are pretty good though - mine wiggles a little bit, but its not mashed up anything too badly yet.
Talking of adjustable tools, i need a new pair of waterpump pliers - any recommendations? I quite fancy some of the knippex ones.
-
took a pic of my two Knipex Cobras and two (how the hell do you call these in English?) ??? tools I use to bend and cut wire, steel, metal sheets and so on.
Finally a heavy duty one hand wire, nail and cable cutter (even though i'm not sure this is its original purpose)
And a SAK and Stockman I had laying around, for good measure and variety of the pic
-
@ThePeacent said:
took a pic of my two Knipex Cobras and two (how the hell do you call these in English?) ??? tools I use to bend and cut wire, steel, metal sheets and so on.
Finally a heavy duty one hand wire, nail and cable cutter (even though i'm not sure this is its original purpose)
And a SAK and Stockman I had laying around, for good measure and variety of the picPincers!!!..... (or nippy-cutter-things if you want to get technical)
The red slack jaw Knippex ones are exactly what i had in mind - cheers!
Also, i like those cable cutters, are they good?
-
Well...
...I had to sort out my tools for tomorrow anyway, so i thought i'd have a bit of fun and make a nice little artistic arrangement for you chaps to have a butchers at:

-
took a pic of my two Knipex Cobras and two (how the hell do you call these in English?) ??? tools I use to bend and cut wire, steel, metal sheets and so on.
Finally a heavy duty one hand wire, nail and cable cutter (even though i'm not sure this is its original purpose)
And a SAK and Stockman I had laying around, for good measure and variety of the picPincers!!!..... (or nippy-cutter-things if you want to get technical)
The red slack jaw Knippex ones are exactly what i had in mind - cheers!
Also, i like those cable cutters, are they good?
Pincers, you say?

Woop WooP WooP
:D
-
@Aleph78 said:
took a pic of my two Knipex Cobras and two (how the hell do you call these in English?) ??? tools I use to bend and cut wire, steel, metal sheets and so on.
Finally a heavy duty one hand wire, nail and cable cutter (even though i'm not sure this is its original purpose)
And a SAK and Stockman I had laying around, for good measure and variety of the picPincers!!!..... (or nippy-cutter-things if you want to get technical)
The red slack jaw Knippex ones are exactly what i had in mind - cheers!
Also, i like those cable cutters, are they good?
Pincers, you say?
Woop WooP WooP
:D
Yeah Pincers...wanna fight!

-
@Fuzzbucket said:
Well......I had to sort out my tools for tomorrow anyway, so i thought i'd have a bit of fun and make a nice little artistic arrangement for you chaps to have a butchers at:
yeah, the cutters are heavy duty. I've sometimes used two hands and my bodyweight on them, and they've gotten out unharmed. I don't know the brand but they're tough
And in your (very nice
) toolset, is that a Gomboy saw that I see? I really like my Silky saws, and my F180 is my favorite for camping 
yeah those are chipped teeth in the saw, just don't ask


-
Well...
...I had to sort out my tools for tomorrow anyway, so i thought i'd have a bit of fun and make a nice little artistic arrangement for you chaps to have a butchers at:
yeah, the cutters are heavy duty. I've sometimes used two hands and my bodyweight on them, and they've gotten out unharmed. I don't know the brand but they're tough
And in your (very nice
) toolset, is that a Gomboy saw that I see? I really like my Silky saws, and my F180 is my favorite for camping 
yeah those are chipped teeth in the saw, just don't ask

It is indeed a Gomboy, but with a Skatboy carpentry blade... i know, unfortunate name.
I too have missing teeth on my greenwood blades from... am... (cough) not using the saw for its intended purposes (cough).
-
@ThePeacent said:
[yeah those are chipped teeth in the saw, just don't ask

Lovely saw by the way. Have you seen the great big folding saws that they do?
-
[
yeah those are chipped teeth in the saw, just don't ask

Lovely saw by the way. Have you seen the great big folding saws that they do?
yeah the Katana is like :o
-
@50ft-trad said:
@50ft-trad said:
I see your combined hammers and prybars, and raise by an axe ...


Need more info

Snail Brand (old English company - now defunkt) Roofing Tool
Here, in Canada, we call those “Box Tools”. Stemming from the days of wooden crates often used in shipping. You can still purchase a modern version online from one of our national tool suppliers (LV) for under $18.00 Cdn. :)
-
@50ft-trad said:
@50ft-trad said:
I see your combined hammers and prybars, and raise by an axe ...


Need more info

Snail Brand (old English company - now defunkt) Roofing Tool
Here, in Canada, we call those “Box Tools”. Stemming from the days of wooden crates often used in shipping. You can still purchase a modern version online from one of our national tool suppliers (LV) for under $18.00 Cdn. :)
That's where I got mine, although at the time I think it was $13.95 at Lee Valley. They also used to refer to it as the Ugly Tool because it couldn't get any uglier, even if it was left out in the rain.
Def
-
Never mind- I see that was listed in the .pdf you attached! :D
Def
-
Love this new Non-Multi thread by the way... the Lee Valley catalogs are eye candy for me...and my shop
-
@Marc_in_NS said:
Love this new Non-Multi thread by the way... the Lee Valley catalogs are eye candy for me...and my shopIt's like the Sears Wish Book, but for adults! :D
Def
-
hahah that PDF's description was fun

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login