Non Multitools
-
@Grant Lamontagne said:
That's where I got mine, although at the time I think it was $13.95 at Lee Valley. They also used to refer to it as the Ugly Tool because it couldn't get any uglier, even if it was left out in the rain.
Def
I don't think it looks ugly, a bit brutal yes. Now a podger - that's a trully ugly tool... but fantasticly good at podging!
I'll dig mine out and take a pic for you chaps... ... is it just me or is everything sounding rude today?
Said podger...

-
How does one Podg ?
-
-
Good for lining up holes so you can get a bolt though.
Or other things you can do with a sharp, curved pointy thing :D
-
So! Its pinning...nice
-
-
@Grant Lamontagne said:
Good for lining up holes so you can get a bolt though
I have no idea how that would work.

Def
Smashie's 100 percent right though! Mainly used in film and theatre production for quickly setting up sets, staging etc... Spikey thingy end lines up the two holes, bolt goes through, ratchety sockety endy bit tightens it up. Used for other things too though of course... podger related that is.
-
Ah, so used kind of like a pry bar then. That makes sense!
Def
-
So podging is aligning...cool, I’ll go to sleep smarter tonight
-
@Marc_in_NS said:
So podging is aligning...cool, I’ll go to sleep smarter tonightNo... no... no... aligning is only part of the process of podging... (or as us pros prefere to call it podgering).
-
I think we're going to need a video... of podgering...

-
Here's my inside tool bag. Because our garage has no direct house access, despite being attached. And I'm too lazy to walk out to my main toolbox. They're all hand tools, for quick repairs.
First pic is the bag itself. The outside pockets hold torx and Philips mini drivers, a small Crescent wrench, a Gerber field sharpener, Klein scissors, a Aaa mini maglite, clicky pen light, WD40, a big sharp, and a carpentry pencil. I hang 1 inch wide duct tape off a Learherman biner.
Inside...ho boy. Hammer, torpedo level, large needle nose pliers, PTx Pirhana, ratcheting driver, bag o' hex bits, 6 inch crescent wrench, Goop, Loctite, paperclips for poking holes in the dried Goop around the cap, Stanley knife, pencils, chain for a ceiling fan, sharpening stone, nail set, assorted tweezers and pencil sharpeners (2 sizes), metric and imperial Allen keys, Teflon tape, eyeglass drivers in a tube of Airborn, 8 inch straight and angled hemostats, small ratchet set, Chanellocks, wire cutters, teeny dedicated flathead and Philips drivers, stubby #2 Philips, electrical tape, small prybar, dental pick, zip ties, ear plugs, graphite lube, magnetic stud finder, head lamp, 16 foot tape measure, cut resistant gloves, and safety glasses. Phew, my thumbs hurt.
That's what I usually turn to for handy man work around the house. Saws and files and such are too big for the bag, but are in the garage if needed. No MT was included because, with that bag, it's not needed. I dont need an extra half pound of steel that's basically redundant.
My most used items are probsbly the headlamp, the 5mm Allen key, thd angeled hemostats (getting stuff out of the garbage disposal), and the mini Philips driver up front, for battery compartments, toys, etc. This is my super dad kit.









Sent from my SM-G930V using Tapatalk
-
@getahl said:
Here's my inside tool bag. Because our garage has no direct house access, despite being attached. And I'm too lazy to walk out to my main toolbox. They're all hand tools, for quick repairs.First pic is the bag itself. The outside pockets hold torx and Philips mini drivers, a small Crescent wrench, a Gerber field sharpener, Klein scissors, a Aaa mini maglite, clicky pen light, WD40, a big sharp, and a carpentry pencil. I hang 1 inch wide duct tape off a Learherman biner.
Inside...ho boy. Hammer, torpedo level, large needle nose pliers, PTx Pirhana, ratcheting driver, bag o' hex bits, 6 inch crescent wrench, Goop, Loctite, paperclips for poking holes in the dried Goop around the cap, Stanley knife, pencils, chain for a ceiling fan, sharpening stone, nail set, assorted tweezers and pencil sharpeners (2 sizes), metric and imperial Allen keys, Teflon tape, eyeglass drivers in a tube of Airborn, 8 inch straight and angled hemostats, small ratchet set, Chanellocks, wire cutters, teeny dedicated flathead and Philips drivers, stubby #2 Philips, electrical tape, small prybar, dental pick, zip ties, ear plugs, graphite lube, magnetic stud finder, head lamp, 16 foot tape measure, cut resistant gloves, and safety glasses. Phew, my thumbs hurt.
That's what I usually turn to for handy man work around the house. Saws and files and such are too big for the bag, but are in the garage if needed. No MT was included because, with that bag, it's not needed. I dont need an extra half pound of steel that's basically redundant.
My most used items are probsbly the headlamp, the 5mm Allen key, thd angeled hemostats (getting stuff out of the garbage disposal), and the mini Philips driver up front, for battery compartments, toys, etc. This is my super dad kit.









Sent from my SM-G930V using Tapatalk
Love the Dog's paw in the first and second picks.
Bet that's the most usefull tool of the entire lot.
Looks like a real helper, how about a complete shot and name? -
Here's my inside tool bag. Because our garage has no direct house access, despite being attached. And I'm too lazy to walk out to my main toolbox. They're all hand tools, for quick repairs.
First pic is the bag itself. The outside pockets hold torx and Philips mini drivers, a small Crescent wrench, a Gerber field sharpener, Klein scissors, a Aaa mini maglite, clicky pen light, WD40, a big sharp, and a carpentry pencil. I hang 1 inch wide duct tape off a Learherman biner.
Inside...ho boy. Hammer, torpedo level, large needle nose pliers, PTx Pirhana, ratcheting driver, bag o' hex bits, 6 inch crescent wrench, Goop, Loctite, paperclips for poking holes in the dried Goop around the cap, Stanley knife, pencils, chain for a ceiling fan, sharpening stone, nail set, assorted tweezers and pencil sharpeners (2 sizes), metric and imperial Allen keys, Teflon tape, eyeglass drivers in a tube of Airborn, 8 inch straight and angled hemostats, small ratchet set, Chanellocks, wire cutters, teeny dedicated flathead and Philips drivers, stubby #2 Philips, electrical tape, small prybar, dental pick, zip ties, ear plugs, graphite lube, magnetic stud finder, head lamp, 16 foot tape measure, cut resistant gloves, and safety glasses. Phew, my thumbs hurt.
That's what I usually turn to for handy man work around the house. Saws and files and such are too big for the bag, but are in the garage if needed. No MT was included because, with that bag, it's not needed. I dont need an extra half pound of steel that's basically redundant.
My most used items are probsbly the headlamp, the 5mm Allen key, thd angeled hemostats (getting stuff out of the garbage disposal), and the mini Philips driver up front, for battery compartments, toys, etc. This is my super dad kit.









Sent from my SM-G930V using Tapatalk
Love the Dog's paw in the first and second picks.
Bet that's the most usefull tool of the entire lot.
Looks like a real helper, how about a complete shot and name?That's Snickers, my Aussie. Also called Snickerdoodle, or just Doodle. She's a sweet mule.
Oh, and my real helper is the toothless wonder there with her. That's my boy, Ryan, Pokemon trainer extraordinaire.

Sent from my SM-G930V using Tapatalk
-
Here's my inside tool bag. Because our garage has no direct house access, despite being attached. And I'm too lazy to walk out to my main toolbox. They're all hand tools, for quick repairs.
First pic is the bag itself. The outside pockets hold torx and Philips mini drivers, a small Crescent wrench, a Gerber field sharpener, Klein scissors, a Aaa mini maglite, clicky pen light, WD40, a big sharp, and a carpentry pencil. I hang 1 inch wide duct tape off a Learherman biner.
Inside...ho boy. Hammer, torpedo level, large needle nose pliers, PTx Pirhana, ratcheting driver, bag o' hex bits, 6 inch crescent wrench, Goop, Loctite, paperclips for poking holes in the dried Goop around the cap, Stanley knife, pencils, chain for a ceiling fan, sharpening stone, nail set, assorted tweezers and pencil sharpeners (2 sizes), metric and imperial Allen keys, Teflon tape, eyeglass drivers in a tube of Airborn, 8 inch straight and angled hemostats, small ratchet set, Chanellocks, wire cutters, teeny dedicated flathead and Philips drivers, stubby #2 Philips, electrical tape, small prybar, dental pick, zip ties, ear plugs, graphite lube, magnetic stud finder, head lamp, 16 foot tape measure, cut resistant gloves, and safety glasses. Phew, my thumbs hurt.
That's what I usually turn to for handy man work around the house. Saws and files and such are too big for the bag, but are in the garage if needed. No MT was included because, with that bag, it's not needed. I dont need an extra half pound of steel that's basically redundant.
My most used items are probsbly the headlamp, the 5mm Allen key, thd angeled hemostats (getting stuff out of the garbage disposal), and the mini Philips driver up front, for battery compartments, toys, etc. This is my super dad kit.









Sent from my SM-G930V using Tapatalk
Love the Dog's paw in the first and second picks.
Bet that's the most usefull tool of the entire lot.
Looks like a real helper, how about a complete shot and name?That's Snickers, my Aussie. Also called Snickerdoodle, or just Doodle. She's a sweet mule.
Oh, and my real helper is the toothless wonder there with her. That's my boy, Ryan, Pokemon trainer extraordinaire.

Sent from my SM-G930V using Tapatalk
Enjoy this time and share every moment and everything you can. They grow up way to fast. There will always be a little part of you missing after they leave.
-
Speaking from experience I hear Douglas sigh but yep, I agree. 2 boys, both in college...
Awesome tools getahl

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Speaking from experience I hear Douglas sigh but yep, I agree. 2 boys, both in college...Awesome tools getahl

Sent on my SM-G930F with Tapatalk
SIGH
Didn't realize It was so loud...
-
Speaking from experience I hear Douglas sigh but yep, I agree. 2 boys, both in college...
Awesome tools getahl

Sent on my SM-G930F with Tapatalk
SIGH
Didn't realize It was so loud...
Thanks guys. Feels weird to say I have a first grader. And a three year old girl right behind him.
Sent from my SM-G930V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login