Non Multitools
-
A few crappy pictures of some of my gear .
Best Regards
Chris

-
More
Chris


-
Nice setup! Is that your work rig? If so, what do you do?
Def
-
I have a large assortment of hand tools at my disposal. Both mechanical oriented, and electrical. Recently picked-up this set of mid-length 1/4" drive S&K's.

Stanley Proto is a good choice for a short-shank, and long-shank magnetic-screwdriver.

Original Petersen Vise-Grips, Husky, Allen, Irwin, Channellock, Klein, Knipex, Ideal, S&K, Gear Wrench, Fluke, DeWalt, Dremel, and Craftsman figure prominently in my collection. These are the one's, which are closest at hand. It seems logical that most advocates of EDC carry, would also have traditional tools en mass. :D


-
Every time I go into this thread; I am so glad that I am not the only one who's getting on his woman nerves with a massive collection of tools that keeps growing and growing....

...but of course it is great and fantastic that I have the right tools for the job when something breaks or needs fixing.
-
At Canadian Tire, the place where I get most of my tools, I tend to buy things on sale. Everything comes on sale sooner or later, and you can get some great deals on things, usually when you don't need them. For example, the ratcheting wrench sets at the beginning of this thread were 50% off when I got them, and the big Stanley set is regularly something like $300 and bought for $120 on sale.
My ex wife used to complain when I was buying stuff like that, and she'd always ask "What do you need that for?" Sooner or later that tool would come in handy for something that needed fixing (there's always something that needs fixing in a house!) and I'd make a point of showing her the tool afterwards and saying something like "good thing I had that tool available, or this would have taken ten times as long." Sometimes I would follow it up with the Canadian Tire website showing the item at full price that week....
I got a lot of these:
::)
Def
-
@Grant Lamontagne said:
At Canadian Tire, the place where I get most of my tools, I tend to buy things on sale. Everything comes on sale sooner or later, and you can get some great deals on things, usually when you don't need them. For example, the ratcheting wrench sets at the beginning of this thread were 50% off when I got them, and the big Stanley set is regularly something like $300 and bought for $120 on sale.My ex wife used to complain when I was buying stuff like that, and she'd always ask "What do you need that for?" Sooner or later that tool would come in handy for something that needed fixing (there's always something that needs fixing in a house!) and I'd make a point of showing her the tool afterwards and saying something like "good thing I had that tool available, or this would have taken ten times as long." Sometimes I would follow it up with the Canadian Tire website showing the item at full price that week....
I got a lot of these:
::)
Def

Similar story here...
Her:
"You don't need all those tools"
"You don't need to buy more tools"
"You have enough tools, you don't need more"
..Blah blah blah...Me:
- Changed battery on her iPhone
- Fixed leak under bathtub
- Fixed electrical wiring in bathroom so that you can turn on the lights without the loud and obnoxious fan coming on
- Fixed the oven
- Helped her dad service his van
- Fixed lawn mower
Also me:
..Do you see now why tools are needed?Also, Also me (as I am the tech nerd in the family):
At home:
- Setup home network, NAT Server with Static DNS and IP, so we can access our files anywhere
- Setup network printer, and set it up on all our devices, Including phones and tablets
- Setup her Microsoft account for her and synced it with all her devices and installed office pack on all
- Setup her Apple ID and iCloud
- Setup her McAfee Antivirus account and installed and synced with all her devices
- Setup her emails on all devices as IMAP accounts so they sync and she can view her emails on all her devices
- Setup shared calendar and synced it across all our devices
At her parents house:
- Troubleshoot their laptop and clean up harddrive to make it run smoother (SATA Drive)
- Setup their new mobile phones
- Troubleshoot and fix intermittent internet connection issue (source was a cheap and smurfty ethernet cable)
At my parents house:
- Troubleshoot slow iMac (Source was crappy third party software and malware)
- Troubleshoot why my Dads apple watch isn't syncing with his iPhone
- Fix none sending email problem on moms iPad
- Fix outlook issue on moms PC
Her:
- "You spend too much time in front of computers"
- "its unhealthy to constantly be looking at devices"
Me:

-
@Grant Lamontagne said:
Nice setup! Is that your work rig? If so, what do you do?Def
A Sparky gone wrong , also do a lot of other stuff , VDV , Fire Systems , access control , some multitrade maintenance on the side . Have been a job super a time or two .
As General rule , my core tools are top notch , fairly compact in relation to capability , power stuff is mostly Bosch and Milwaukee . I count hand tools as more important than power stuff . They don’t change much over time . I view power tools as 2-5 year consumables , better stuff is always comming down the pipeline .
I use a lot of Knipex , PBSwiss ( makes some stuff for Victorinox , the bike tool by way of example , I further suspect they make the Vic. Ratchets and extension bars ) , Whia and Wera are also very much on the Menu .
Best Regards,
Chris
-
My “ Walk In “ and “ back up” PBSwiss 1/4” hex ratcheting multidriver . PBSwiss makes some of the best ratcheting drivers known to man , makes Snap On feel like a kid’s toy . I did the leatherwork .
Best Regards,
Chris


-
@MMR said:
Similar story here...Her:
"You don't need all those tools"
"You don't need to buy more tools"
"You have enough tools, you don't need more"
..Blah blah blah...We'd reached an impasse where the logic is that one can't have too many tools. Just as one can't have too many shoes..
At least tools rarely come in pairs! :D -
Similar story here...
Her:
"You don't need all those tools"
"You don't need to buy more tools"
"You have enough tools, you don't need more"
..Blah blah blah...I’m a Widower , so I no longer have those issues . I got to tell you , I don’t miss being married , even a small amount !
Best Regards,
Chris
We'd reached an impasse where the logic is that one can't have too many tools. Just as one can't have too many shoes..
At least tools rarely come in pairs! :D -
As much as I enjoyed my dating years, I rather enjoy my single life.

Nothing like getting a paycheck and dropping hundreds of dollars on stuff I don't need and eating crappy food to make up for it. Not to mention I don't get the third degree yelling for my hobbies. New MTs and watches are all the supplements I need.

-
Gotta say I don’t miss Holy Deadlock at all , ditto Dating , and shacking up . Freedom isn’t free , sadly it’s avery exprnsive luxury ! I only answer to my cats , easy to buy off with treats , and don’t own shoes !
Best Regards,
Chris
-
Great topic :D
These are tools I use for work and at home. It isnt everything but its the stuff I use. Anything else is rolling around in my car out of my wifes way

I have spent the last 15 years collecting these and whenever something goes missing I replace it with cheap Chinese stuff.
With the exception of multitools I cannot validate expensive tool purchases to myself anymore.
Most important to me jobwise are ph 2 drivers and a long nose.
Most treasured are my Wiha screwdrivers. They are the best thing ever created!!! I have had 3 'misplaced' at customers... Never to be found again even though I go back a half hour later for it. Thats South Africa for you I guess, finders keepers.But you use a Wiha and you never want to use anything else again, a bit like the Spirit ;)
Which is why I carry crap tools to work
It makes no sense to anyone including myself but I would rather lose a $2 screwdriver than a Wiha nutdriver I waited 3 weeks for, at ten times the price.



-
Nice assortments, Skebeng!

I think tools "vanish" almost anytime they are left about. It amazes me that some people are so cheap and crappy that they would steal another person's tools. But, it happens. I work really hard to make sure I don't leave stuff laying around, but I know a lot of people who have had tools "vanish" in just a few minutes.

I have the luxury of being able to go backwards-crazy looking for a tool I misplaced. But, I know most people don't get a chance to figure out where something went, because it might jeopardize their job. :ahhh
-
Wow, just joined this forum but that is some beautiful stuff. I wish I had verniercalipers and a digital scale! I don't have the house or vehicle to need serious tools though. I just rent a little place :P
-
Welcome ! Good basic stuff is always good to have !
Best Regards,
Chris
-
I've had some special interest for portable socket sets the last year or so. Today I got two variants in the mail.
First off is a Wera 3/8" set. Unlike most others it is pouch based, and very nice at that. The ratchet seems to be quite slim, and the embroidered sizes for the sockets was a nice touch. They've jumped a few metric sizes here and there, but should be fine for 98% of the use I see. (I do come across 14mm at times - others mileage might vary).



-
Then there is a little 1/4" Bahco set. Other Bahco sockets sets I've seen are nice, so I figure this will be too.
Somehow that ratchet rubs me a bit the wrong way initially, might be the thickness of it (?), but time will tell if this will be a portable go to or not. Not making any judgement just yet.
A peculiar thing with this set is that they've decided that having two PH2 bits are more useful that say a PH2 and a flat bit. There are no flat bits at all so that was unexpected.



-
@Vidar said:
I've had some special interest for portable socket sets the last year or so. Today I got two variants in the mail.First off is a Wera 3/8" set. Unlike most others it is pouch based, and very nice at that. The ratchet seems to be quite slim, and the embroidered sizes for the sockets was a nice touch. They've jumped a few metric sizes here and there, but should be fine for 98% of the use I see. (I do come across 14mm at times - others mileage might vary).
Very nice! I do like the look of Wera's line of tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login