Non Multitools
-
I've had some special interest for portable socket sets the last year or so. Today I got two variants in the mail.
First off is a Wera 3/8" set. Unlike most others it is pouch based, and very nice at that. The ratchet seems to be quite slim, and the embroidered sizes for the sockets was a nice touch. They've jumped a few metric sizes here and there, but should be fine for 98% of the use I see. (I do come across 14mm at times - others mileage might vary).



-
Then there is a little 1/4" Bahco set. Other Bahco sockets sets I've seen are nice, so I figure this will be too.
Somehow that ratchet rubs me a bit the wrong way initially, might be the thickness of it (?), but time will tell if this will be a portable go to or not. Not making any judgement just yet.
A peculiar thing with this set is that they've decided that having two PH2 bits are more useful that say a PH2 and a flat bit. There are no flat bits at all so that was unexpected.



-
@Vidar said:
I've had some special interest for portable socket sets the last year or so. Today I got two variants in the mail.First off is a Wera 3/8" set. Unlike most others it is pouch based, and very nice at that. The ratchet seems to be quite slim, and the embroidered sizes for the sockets was a nice touch. They've jumped a few metric sizes here and there, but should be fine for 98% of the use I see. (I do come across 14mm at times - others mileage might vary).
Very nice! I do like the look of Wera's line of tools.
-
I love this!! Time to get out some of mine!
-
@Barry Rowland said:
I love this!! Time to get out some of mine!I'm looking forward to seeing them!

Def
-
I'll try and get some pictures one day. I have maybe 5,000 tools altogether. I started out working on cars and trucks, quickly got into Imports and had to add metric tools. Got out of Cars and into industrial, fork lifts to bulldozers for 20 years. My back got bad, so I changed over to Cranes. Overhead cranes and hoists. Repair, rebuild, design, and build. The design part got me into a lot of electronics which led to some government jobs on control systems. Spent quite a bit of time doing things that don't exist, my security clearance was higher than most security people where I worked. LOL Really helped after homeland took over the airports, I walked around the check points. My tools range from 1/8th" to 5" in wrenches and sockets, not counting adjustables. I ended my career with just a small tool roll that I took everywhere, with specialized tools in it. When I had to retire, I had to return most of those tools to the gov., interesting as hell, and I can't tell anyone what or where I did.
-
I guess I am glad that you retired then, so you could hang out with all of us and tell us stories of things that don't exist, in no detail whatsoever!
:DI look forward to seeing what tools you have. As you can see from above, I am pretty basic myself, mostly just DIY home repairs and the odd bit of wrench turning on my Jeeps. I did some fiberglass work this summer on one of my kayaks and promptly remembered why I hate working with fiberglass!
Def
-
@Grant Lamontagne said:
I guess I am glad that you retired then, so you could hang out with all of us and tell us stories of things that don't exist, in no detail whatsoever!
:DI look forward to seeing what tools you have. As you can see from above, I am pretty basic myself, mostly just DIY home repairs and the odd bit of wrench turning on my Jeeps. <u>*** I did some fiberglass work this summer on one of my kayaks and promptly remembered why I hate working with fiberglass!
***</u>
DefI know exactly what you're talking aboutDef! I took body shop in high school and learned on my own first car. I itch all over just thinking about fiberglass work.
>:D -
I need to stay the hell out of this forum. :P I can barely work on anything these days, and sure don't need any more tools than I have. But That Wera and Bahco socket sets sure look nice!

-
Yadda, I hope your life insurance is paid up. After my wife shoots me, she's coming for you!
:ahhh -
@papadan said:
I need to stay the hell out of this forum. :P I can barely work on anything these days, and sure don't need any more tools than I have. But That Wera and Bahco socket sets sure look nice!

The Wera sure is nice. As for the Bahco I'm still on the fence. The ratchet feels a bit thick, and I would have preferred a flat bit and a PH instead of two PHs. Weirdly the box cutout is also a bit off here and there sizewise: the handle don't fit proper and the extender is smurfing hard to get out - On the positive side the sockets are slim and with finger grips. Other Bahco sets around here are nicer, but the main upside of this is its compactness. (And it is a third of the price of the equal Wera, so not really a fair comparison).
I'm with Grant - tell us about non-existing tools for non-existing uses in no detail whatsoever :D Or your favorite ones? There seems to be a bit of a divide across the pond as far as common tool brands go, so I assume there might some great tools over there I've never seen or heard of.
-
The line to complain about me is over 50 years long. Mom is in front and my wife is second. Mom hasn't finished yet so your wife may be waiting a while for her turn. :D >:D
You're a smurfing genious if you've somehow managed to get them to wait in line! :D

I didn't say they waited patiently.

-
The line to complain about me is over 50 years long. Mom is in front and my wife is second. Mom hasn't finished yet so your wife may be waiting a while for her turn. :D >:D
You're a smurfing genious if you've somehow managed to get them to wait in line! :D

I didn't say they waited patiently.

Yup, having to wait in line is the main reason they're there...

-
The line to complain about me is over 50 years long. Mom is in front and my wife is second. Mom hasn't finished yet so your wife may be waiting a while for her turn. :D >:D
You're a smurfing genious if you've somehow managed to get them to wait in line! :D

I didn't say they waited patiently.

Yup, having to wait in line is the main reason they're there...

:D -
I almost bit off more than I could chew with the Sven Saw this time. Found a tree that was clearly on it’s last legs (hollowed out, bark fallen off in pieces, top sheared off, etc) but still had usable wood up top. I have been planning a few projects and figured this would work well.
The Sven saw, my only hand saw, just about met his match. The blade is pretty loose now even at the tightest setting. That’s to be expected I guess, since it was pushed past it’s intended use. The job would have been a lot easier if I could have safely sawed at the back end of the tree but it was leaning to far over to begin with.


-
Recognizing this thread is older, but thanks G-Dizzle for unearthing it. Good read. I particularly enjoyed the organization of the tools. My OCD kicks in when I see tools just thrown into tool boxes.
Here is a look at my 9 drawer 54” tool chest




-
Organization of parts and screws


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login