Non Multitools
-
I'll add pictures later, but I can add description now!
I essentially have two toolboxes. One lives in the garage, and has most of my tools in it. All of my bigger stuff lives here. The rough cut saw, the pipe wrench, the gigantic crescent wrench and Channeloks, roofing hammer, files, saws, and myriad other things. I have a set of SAE box/open ended wrenches in a roll, and a socket set in its own carrier.
Then there's my tool bag. I love my tool bag. It lives in the house, and gets used more than anything else.
It's nothing special. A maybe 14 inch long Husky branded, nylon bag. It houses a bunch of stuff. A pair of needle nose pliers, a small Channelok, a small crescent wrench, a hammer, a set of SAE and metric Allen wrenches, a ratcheting screwdriver, nail set, precision screw driver, flashlights, WD40, duct tape, tape measure, level, Stanley knife, scissors, small pry bar/widgy bar, ratcheting 90 degree driver set, small set of files, and basically anything I might need to be super dad.
Mostly, it's there for when I'm too lazy to run to the garage, which doesn't have direct house access. Mostly, I comes out when hanging pictures, changing batteries, maintaining or repair stuff. I generally don't bother with a multitool in it, because it covers most bases. It's probably my one personal possession I would miss if it went missing or was lost. It's MY multitool.
-
I'm looking forward to seeing your tool kit!
Today's addition to the tool pics is this monster:

Officially it's the Toughbuilt F240 folding 24" bolt cutter that manages to become only slightly shorter but much wider when folded.

You all blame me for encouraging you to buy tools, but this set of cutters is proof that I am just as susceptible as anyone else. See the original thread HERE. What I didn't mention in the original thread is that since I needed them for work I told my boss about them as well, figuring he would want a set, and he ended up buying two pairs- one for him and one for me. Here I am, four years later and I still use them. Last week alone I used them to cut some replacement safety chains for my utility trailer.
Def
-
Now they look a handy set of croppers. I've never seen a folding pair before
-
You obviously don't steal enough bikes Kev.
-

Would a set of these make me a good (bad
) bike thief? -
well, I've also got two toolboxes with very limited arrangement of tools. I only own one electrical powered tool, my Dremel. Yup, no electrical drills, nail guns, compressor-driven tools, etc.
My first toolbox has
Two thick blunt pliers,
two smaller needlenose pliers,
two electrical curved pliers, Knipex cobra in three sizes,
two adjustable wrenches (small and big, rubber handle and all metal),
two Vise Grips (long and thin, stubby and rounded),
six files of different lengths, metal rulers and
five different chiselsMy second toolbox has
Four phillips screwdrivers of different sizes
four flatheads, different sizes
two bit-exchanger drivers with sets of bits and heads
three ratchets
set of Allen keys
small screwdriver for Torx, and other small sized bits
heavy duty scissors
wire cutters
rebar cutters
measuring tapes, tape, Duck tape, cord, etc.And out of those two toolboxes I've got 14 different hammers (yup, I *love *hammers :D) in a wooden stand, of different kinds, sizes and purposes. Next to them are my axes (2) and hatchets (6), and finally half a dozen machetes more or less (depending on the time of the year).
I've also got a big and a small bolt cutter that I frequently use at our woods propertyOn another room I've got my saws, 3 metal saws (hacksaws), 6 folding wood saws, a big crosscut saw, a multi-purpose (blade exchangeable) wood/plastic/metal saw, 2 precision angled saws (with guides and angles for small woodwork) and a bone saw
-
@ThePeacent said:
I've got 14 different hammers (yup, I *love *hammers :D) in a wooden stand, of different kinds, sizes and purposes.Dang! I need a hammer stand :ahhh
-

I've got 14 different hammers (yup, I *love *hammers :D) in a wooden stand, of different kinds, sizes and purposes.
Dang! I need a hammer stand :ahhh

Really need picks of that stand
-
@Aleph78 said:

Would a set of these make me a good (bad
) bike thief?All bike thieves are bad! Lowest form of life, the smurfs!

Let's see, I have some tools I'd like to use on them... Now, where's that Annihilator?

;)
Just take them to that creepy abandoned place you did the thread on and use leave them there to rot
-
@Aleph78 said:

Would a set of these make me a good (bad
) bike thief?All bike thieves are bad! Lowest form of life, the smurfs!

Let's see, I have some tools I'd like to use on them... Now, where's that Annihilator?

;)
Just take them to that creepy abandoned place you did the thread on and use leave them there to rot
Now there's a thought... >:D
-
@Grant Lamontagne said:
I'm looking forward to seeing your tool kit!Today's addition to the tool pics is this monster:
Def
Ha! I had the smaller version of those (18"?), but stupidly sold it as it wasn't getting much use at the time... I have a tendancy to do that then kick myself later.
I particularly liked how you could open them with one swing of the arm while simultaneously KO'ing a work collegue.
-
@Grant Lamontagne said:
I'm looking forward to seeing your tool kit!
Today's addition to the tool pics is this monster:
Def
Ha! I had the smaller version of those (18"?), but stupidly sold it as it wasn't getting much use at the time... I have a tendancy to do that then kick myself later.
I particularly liked how you could open them with one swing of the arm while simultaneously KO'ing a work collegue.
I haven't really tried the bit about knocking out a co-worker, but I have managed to hit myself in the forearm with it a few times while swinging it out and it wasn't pleasant.... :ahhh
Def
-
@Douglas said:

@Sparky415 said:I've got 14 different hammers (yup, I *love *hammers :D) in a wooden stand, of different kinds, sizes and purposes.
Dang! I need a hammer stand :ahhh

Really need picks of that stand
sorry mates, I was in a hurry today and went to the stand but forgot to take pics

I tried to amend my mistake by taking the pic of the hammers that I took from there today, the axes that I had nearby and some other tools that I use very often. (These are my most used ones, and the workhorses of my small collection)


-
There's a good few hammers there P

Waiting for the stand :D

-
Here I was thinking: "Why do you have 9 hammers?"
Then I remembered which forum I was on... :D
Great tools, bro!

-
Chanting....Stand,, Stand,, Stand,, Stand,, Stand,, Stand,, Stand...


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
