My custom wave
-
Greetings. Well done on the modded Wave

-
Thanks guys
@gregozedobe said:
Welcome to MTo
Looks like you'll fit in here quite well.
The search for the "perfect" MT can take some time, money & work.
Seeing as we have quite a reputation here as enablers, allow me to be the first ;) Have a look at the Paladin series of MTs, these come with punchdown tools and wire strippers built in to the pliers in the larger two. They were specially made for Paladin by SOG, but were discontinued a while back. They do turn up for sale every now and then, but not very often. They are easy to mod, and SOG still sell various components to suit (but possibly not the Paladin-specific ones like the punchdown tools)
For more info, see Chako's excellent thread:
/topic/18777I've seen those and have been on the lookout
I would miss the one handed tools of the wave though, but the paladin seems to have 'almost' everythingSOG has a wire stripper tool. I added it to my CenterDrive. Works OK, haven't decided whether to keep it or not.

Think there's enough material to adapt it to the wave? I've looked at them and almost pulled the trigger, hard to argue the 12 dollars brand new.
Thank you, sir
I think I can make a good stripper head for them if I find a pair of strippers close to the same angle and size.
I'd use a Leatherman plier head and cut off the pivots and use them as spacers basically. Then pin those spacers to the strippers, but because most are offset like scissors, I would need to make the locking ramp into one side of the strippers and use the leatherman spacer for the ramp on the other side.
Most likely, though, I'd end up with a ruined pair of strippers and pliers head lol -
Welcome 386greene,
Nice Wave

From another thread (not checked), regarding a Paladin being available: /post/1578546
Maybe what you're looking for?
-
Welcome ,love the mods, very nice ,looks factory done

-
-
@Dutch_Tooler said:
Welcome 386greene,Nice Wave

From another thread (not checked), regarding a Paladin being available: /post/1578546
Maybe what you're looking for?
Looking for the 540 if I get one, gotta ask the wife nicely if I can buy another MT though lol
@Zed said:
Welcome ,love the mods, very nice ,looks factory done
Thanks, I was very worried about the blade exchanger, but it came out pretty nice
The double exterior keys was a pain though, and I still need to work on the little piece for the pivot, whatever it's called, to get it perfect, but I'm pretty proud I managed to do that one.
-
Another pic to show the keys a little better

-
welcome to the forum, and great work on your modded Wave... very nicely done!

@386greene said:
The double exterior keys was a pain though, and I still need to work on the little piece for the pivot, whatever it's called, to get it perfect, but I'm pretty proud I managed to do that one.I'd love to see some close-up pics of this.
I can imagine it was difficult getting both keys to fit nicely, especially the one on the opposite end from the pliers. -
@Breezy12 said:
I'd love to see some close-up pics of this.
I can imagine it was difficult getting both keys to fit nicely, especially the one on the opposite end from the pliers.Maybe these help, I don't know if I've seen this done before
The top key was actually nice and easy. It opens with one hand and locks up nicely.
Really need to cut a new key for the bottom, I shaved that key down which I previously had with the internal tools and there wasn't really enough material to make a catch to open it
And the inside of the cap part is still rough, need to finish it up, it's basically just a spacer for looks. There's nothing to lock the key open, but I think I could make some slots in the frame and make a new liner lock for it. Not sure if that will weaken the frame though.



-

Nice - an external tool on a Wave at the end of the handle (circumventing the lock). I've never seen this done before.

Making a liner lock at that end sounds complicated due to the very restricted space... but for a key it doesn't sound as if this really needs to be done (?). It might be necessary were one to contemplate any other tools in that position though...
-
Nice - an external tool on a Wave at the end of the handle (circumventing the lock). I've never seen this done before.

Making a liner lock at that end sounds complicated due to the very restricted space... but for a key it doesn't sound as if this really needs to be done (?). It might be necessary were one to contemplate any other tools in that position though...
You're right, the lock isn't necessary for the key, it works great as is
I just think it would be a nice touch, but it wouldn't be easyI also saw someone talking about using a ball detent, that could be done I think, just to give it the snap open feeling.
-
Welcome to
The work you have done on that Wave is awesome :D
The Key idea has been done but not like what you have done with it :ahhh Very creative
Hope to see you more around the forum

-
@Poncho65 said:
Welcome to
The work you have done on that Wave is awesome :D
The Key idea has been done but not like what you have done with it :ahhh Very creative
Hope to see you more around the forum

Thank you, sir
Thought I would share this, not really a mod but I stumbled across this neat little bit for my homemade extension

-
386greene, would you consider posting here? -》
/topic/74592
Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
386greene, would you consider posting here? -》/topic/74592
Sent on my SM-G930F with Tapatalk

Done, sir -
Many thanks

Sent on my SM-G930F with Tapatalk
-
@386greene said:
The top key was actually nice and easy. It opens with one hand and locks up nicely.Really need to cut a new key for the bottom, I shaved that key down which I previously had with the internal tools and there wasn't really enough material to make a catch to open it
And the inside of the cap part is still rough, need to finish it up, it's basically just a spacer for looks. There's nothing to lock the key open, but I think I could make some slots in the frame and make a new liner lock for it. Not sure if that will weaken the frame though.
Very cool

-
So here's an update.
Added the 3d Phillips since it has better reach for small electronics, and a dedicated flat so I could put a torx bit in the bit holder. I did remove the plier rests inside the frame, just snapped it off and ground it flat to keep the springs and locks. Also, put a notch in the frame for the bottom key and cleaned it up some, put some washers on it and got the right torque on the pivot. Nice and smooth operationI'm pretty happy with it for now (put locktite on the pivots) so I'm leaving it for a while. Don't think I'm going to pursue the strippers or punchdown tool for a while. Plus, I'm gonna start on my wife's new juice here tonight lol


-
Very nice

Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login