Is this an expected behavior?
-
Hello all, long time lurker – first time poster. First off, let me say this site is great and I’ve found a world of knowledge here, so thanks to all the helpful people who post here. Secondly, I’ve always been a big Leatherman fan. I have two (new model) Surges, a Crunch, a Skeletool, a Skeletool CX and both my kids have Leaps. Last summer while in Portland, I stopped by the LM store and purchased a Wave and a pocket clip with the intent of replacing the beastly Surge I’ve been carrying around for years. Long story short, I get home, put the clip on and then notice how loose the handles are. I send it in for warranty and, being engraved, they do something and then send it back. Problem still exists. Send it back again and, again, they send it back seemingly unchanged. This time when I call, I tell them I don’t care about the engraving and to just send me a different tool. Received it in the mail today and it is exactly like the other. When pocket carried with the clip, it wobbles open just from moving around. My other LMs (while different models) still take deliberate action to open. Tried to attach some pics for reference so hopefully that works.
My question for the MTO brain trust is: is this an expected behavior for the Wave? Should it just fall open like this without any effort/resistance? Thanks!



-
Welcome aboard !

I never pocket carry mine but I just tried it with a pocket clip and it does the same thing as yours. The handle opposite the clip is looser. My Surge is not like that, it stays closed quite well.

-
Welcome sorry to see that -
I don't have a pocket clip but the handles on my wave will fall slightly open if I hold it by only one handle. Still, it's not as loose as my Supertool 300 which is so loose I can flip it open like a butterfly knife. I don't think it has any bearing on the tool in use.
-
You can try getting some security torx bits and tightening the bolt on that side, but it will also tighten the blades. Might help, and it might make it so you can't OHO the blade.
-
You wouldn't expect that to be normal
For a quality multitool, on a cheap tool maybe
-
My Surge and Wave are both pocket carried and neither of them do that.
-
@captain spaulding said:
My Surge and Wave are both pocket carried and neither of them do that.Same here.
Checked my Wave and my new Wave + (and my BO Wave) and none of them do this.
Like Lynn said, you could try tightening the security torx screws a bit, but I would suggest to do this in very small steps, I know from experience that turning these screws for 1/4 turn already has quite an effect on the tightness.
Welcome to MTO by the way
. -
I can open my wave like a butterfly knife one handed to access the pliers. It's very handy.
Do you prefer to not carry in a sheath? Because that would also fix the problem.
-
Thanks for the replies everyone. I have a BO Surge with a pocket clip that has seen a few years worth of pocket carry and it still locks up as tight as when it was new. After about the second trip to LM, I tried tightening the torx screws on the Wave myself, but as mentioned, it effectively removed the ability to OHO the outside tools. I know some people don't mind it but I personally can't stand anything hanging off my belt, so sheath carry is out. My only motivation to replace the Surge with the Wave is the ability to have a saw and file simultaneously. IMO, if the Surge had another blade exchanger instead of the serrated blade (and maybe the eyeglass screwdriver instead of the small screwdriver), I think it would be about perfect. At this point, since 3 round trips to Portland still hasn't done the trick, I guess I'll cut my losses, abandon the idea of a Wave for EDC pocket carry and throw this one in the glove box. :-\
-
The only solution I can think of is to add some very thin washers to the pivots where the handles attach to the plier head. This would require complete disassembly. Take notes, pictures and be patient. If you need any other help, just let us know. :)
On another note, I have two Waves and one is loose like that. I sheath carry mine, so it doesn't bother me, but the tool opening in the pocket would be aggravating.
-
Welcome to
Sheath and pocket clip carry mine but I don't believe that any of my Waves or Surges do this
Hope you can get it sorted 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login